Breathable film CI Type Flexographic Printing Machine

2. With below characteristics:
1)  Prompt print for production once printing plate mounted & color registered, no need to adjust plates again, improved production yield.
2)  Changing a set of plate roller(fastened after unloaded 6pcs old plate roller and loaded 6pcs new plate roller) , it need 20 minutes only.
3)  After plate rollers initially loaded, the electric Quick Color Registering System (QCRS) in quantitative & positioning can achieve the horizontal & vertical color registering within 1min. at suggested speed at 50m/min.
4)  Max production speed is up to 180m/min., registering allowance +/-0.1mm, the registering accuracy does not fluctuate during speed up or down.
5)  Substrate s tension is held during machine paused, avoids substrate shifted.
6)  Automatic twin unwinding/ winding unit, achieving auto substrate cutting/ rolls jointing/ rolls switching on running status and no need to speed down.
7)  Precise structure, simple operation, convenient maintenance & high automation, only ONE worker needed in machine operation.

3. Main Parameters:
1)  Max. mechanical speed:                    200m/min.
2)  Printing speed:                                    120-180m/min.  (Subject to substrate & ink spec.)
3)  Substrate max. width:                         1200mm
4)  Max. diameter of unwinding roll:    600mm
5)  Max. width of winding roll:                  1200mm
6)  Max. diameter of winding roll:         600mm
7)  Max. printing width:                              1150mm
8)  Repeat length:                                      350-820mm
9)  Gearing:                                                 10mm
10) Printing plate correcting:                     horizontal: +/-10mm, vertical: +/-7.5mm, online (in machine running status) electric Quick Color Registering System (QCRS) in quantitative & positioning
11) Power:                                                    125kw
(Unwinding motor: 5.5kw x 2sets, main motor: 7.5kw, traction motor post print: 4kw, winding motor: 7.5kw x 2sets, ink motor: 0.1kw x 6sets, corona device: 4kw, drying: 30kw + 45kw, fans: 8.2kw)
12) Weight:                                                   Approximate 25Tons
13) Dimension (L x W x H):                       12 x 4.3 x 4.2m (H=4.9m after chamber opened)
14) Printing colors:                                     Single side 06 colors printing
15) Printing plate:                                       polymer, 1.7mm or 1.14mm (or by client s option)
16) Standard printing length:                   420mm (or by client s option)
17) Ceramic anilox:                                  162 x 1150mm
(Included 250LPI x 2pcs, 650LPI x 4pcs, suitable for processing color print; or by client s option)
Remarks:We have the right to make the the necessary amendments on the design without affecting function of the machine

4. Main components:
1)  Turret type twin unwinding unit                  1 SET
(Included single side corona treating device, EPC system before printing)
2)  CI type 06 colors printing unit                                    1 SET
[Included arc roller to flatten & static eliminator before printing, each printing stations included online (in machine running status) electric Quick Color Registering System (QCRS) in quantitative & positioning.]
3)  Drying cabinet between printing stations               5 SETS
(Air blowing section can be adjusted to actual printing width)
4)  Drying chamber post print                                          1 SET
(Pneumatically open or close, included substrate routing platform)
5)  Chilling traction device post print                              1 SET
(Substrate formed by water chilling roller post print)
6)  Turret twin winding unit                               1 SET
(EPC system before winding)
7) Static graphics monitoring system                           1 SET
8) Constant temperature control system of CI drum  1 SET
(Included chiller, cold/ hot water tank, electrical proportion executing valve)
9) Electrical control system                                             1 SET
10) Ink circulation system                                                6 SETS
11) Ink viscosity automatic tracking controller             6 SETS
Remarks: each printing station includes plate roller, ceramic anilox, full closed type doctor blade & alloy ink cabinet, two ways pneumatic ink pump for automatic ink circulation, online (in machine running status) electric Quick Color Registering System (QCRS) in quantitative & positioning & ink viscosity automatic tracking controller.