H-aluminium cilp

Product introduction

(1) aluminum wire on copper wire in the air phase, due to the presence of water, during which a potential difference, aluminumwire as the anode, a cathode of copper wire, current flows from the copper conductor aluminum conductor, such electrical effectscaused by chemical anodic oxidation of aluminum conductorerosion. The aluminum oxide layer and the conductor resistance increases have led to the current can not.

(2) distribution of aluminum in 1954, the United States follow the issue and found effective to prevent electrolysis of the theory,called to increase the anode (Mass-anode) theory. That use aluminum as aluminum and copper connectors of continuation, it will increase the amount of aluminum joints of aluminum, copperand aluminum wire into the ends of the line of the ditch in the middle compartment with aluminum separated by means of itsstructure to separated aluminum and copper of direct contact, that connection of the two lines in the middle of doing an aluminum  compartment, so larger aluminum conductors,aluminum connectors to reduce the surface current density that isthe principle to prevent the corrosion of aluminum joints.

(3). H-clamp conus theory as a basis for the design andproduction. Taiwan Power Company has long been used in highvoltage circuit of aluminum and copper crimp splice. Twenty years have not occurred due to corrosion caused by the H-clampcircuit accidents, especially in copper wire from the transformersecondary voltage line connected to the aluminum, then copper,aluminum low voltage wire to take account of the copper wiremused based on aluminum the continuation of its use is verylarge.