HD 720P Portable Car DVR

I: Structural Representation

II: Product Introduction

This high-tech new product, featuring many functions such as high resolution video, camera, night vision, record, network chat, external TF card memory, being available for your excellent and happy daily life, tourism and outdoor activities, is mainly used for vehicle video-recording and effective evidence collecting for safety misadventures

III: Structural Function Introduction

1-Switching   2-Camera   3-Video   4-Play   5-RESET   6-VGA-HD Change-Over Switch   7-USB Interface   8-TF Card Slot   9- Operation Indicator    10- Charge Indicator    11- Microphone   12- Display   13- Glass  14-Support  15-Upper support slot   16- Photosensing device  17-Infrared Light for Night Vision   18- Lens   19- Speaker   20-Lower Support Slot                                                                         

IV: Operating Instruction

1-Insert the TF card into the TF card slot on the left, start it by pressing the Switching. The operation indicator will be ON when the product is started up and a “Welcome” will appear. Wait for 3s until the product is ready. The TF card will be read when the product is under a standby state. The higher the capacity of the card is, the longer the reading time needs (3-5s); 

2-Press the Video to start the video function under the standby state, every video clip lasts 2min. An unlimited loop recording is allowed. Repress the Video to perform an automatic storage of clips and go back to the standby state; 2 video types (2min) are provided and the pixels of which are 1280X720 and 720X480 respectively; 

3- Pictures can be taken by pressing the Camera (1 picture / press) under the standby state;

4- VGA-HD Change-Over Switch-For video: VGA=720X480, HD=1280X720; For USB mode: the product, when stopped, can be connected to the USB of your computer. VGA= USB flash disk memory, HD=PC CAM (network camera);

5-The RESET can be used to restart the product if a crash is caused by an abnormal operation or running environment.

6- Press the Play for 3s to start the Play Mode, the files can be played and paused by short pressing the Play under the Play Mode; The Camera and Video mean Last and Next respectively. Quit the Play Mode by pressing the Play for 3s to return to the standby state;

7- A low battery signal will appear on the screen when the product is under low battery, charge the product as soon as possible;

8-The Video function will be started if the red light is ON under the charging mode, press Video to pause and keep the charging mode. If a prolonged video record is needed, no any other operation is allowed under the charging mode.

V: Relative parameters