Matte anti-glare LCD screen guard for HP Touchpad

Matte anti-glare LCD screen guard for HP Touchpad

High quality optical grade PET film with top surface coated with a nano-resin as an Anti-Glare hard-coat treatment. Diminish glare and enhance the film surface hardness.

1) Matte finished surface and reduce glare from the screen , it allows your lcd screen completely present .
2) Perfect fit and Custom made for HP Touchpad  , NOT universal.

4) High quality Japanese PET , enviromental protection and recycle materials.

5) Reduce fingerprint and dirt proof.

6) Air bubble proof , static cling and no residue glue when remove

Step 1 Check Film Size   Clean both hands and lcd screen and adjust the location where the film would be on the lcd procedure (Please arrange the film to the center of lcd before you take off all vinyl out of the hard film )

Step 2. Clean LCD    Clean the LCD with cleaner and micro fiber cloth included. If there is a dust left on the lcd, that can cause a bubble. Apply cleaner on the cloth , not on lcd. 

Step3. Film Installtion    Take off 1/3 of back PET and begin to apply it on the area you desire on lcd. Take off the rest of back PET as your fully attach the film. Result may vary upon installation.

Step 4, Remove bubble with a Squeeze    Remove bubbles by using squeeze included with the film, If you see bubbles after installation, lift up with film with a tape and re-attach it or slide the bubble to the sides very slowly and carefully with a squeeze.