All products

Hot Dip Galvanized European Type Steel Plank, 320mm wide, for O-ledger

European Type Steel Plank is one kind of high safety dedsigned plank for Ring Lock System Scaffolding. It is designed with 320mm wide and wide hooks for tubular ledger (O Ledger). The plank is hot dip galvanized for long lasting use.

European Type Steel Deck, 320mm wide, for All Round Scaffolding U-ledger

U-deck Steel Plank is special design for system scaffolding U-ledger. There are two common width 320mm and 190mm.

South-East Asia Plain End steel Planks for Tubular Scaffolding

South-East Asia Type of Steel Plank is a kind of economical, light weight, good quality scaffolding plank. It is normally used for coupler-tubular scaffolding, it is in 240mm or 210mm wide, and in the length of 0.5m, 1.0m, 1.5m, 1.0m, 1.5m, 2.0m, 2.5m, 3.0m, 3.5m, 4.0m.

American Style Full Aluminum Plank 19" Wide

All aluminum Plank is made by 6061-T6 or 6082-T6 aluminum extrusion, plank width 19" (483mm), plank length from 3' to 10'. The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.

American Style Aluminum Plywood Plank for Scaffolding

Aluminum Plywood Plank is made by 6061-T6 or 6082-T6 aluminum extrusion and fire-proof plywood panel, plank width 19" (483mm), plank length from 3' to 10'. The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.

Aluminum Plywood Ladder Hatch Deck / Aluminum Plywood Ladder Trapdoor Plank

Aluminum Plywood Ladder Hatch Deck is made by 6061-T6 or 6082-T6 aluminum extrusion and fire-proof plywood panel, plank width 24" or 28", plank length from 7' to 10'. Hatch Ladder: Aluminum 6061-T6, 7-step ladder The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.

Stringer Stair for Ring Lock System Scaffolding

Stringer Stair is a popular stairway for system scaffolding in American market. It is set for 7' scaffold bay length, 6'7" high rising and for 3'6" wide access. The stair stringers and treads can be seperated. It can help to reduce job difficulty of when installing or dismantling the stair. Also it is much more convenient for material storage and transportation.

7' Bay Internal Stair for American Frame Scaffolding

Internal Stair is the stairway solutions for temporary access. 7' Bay Internal Stairs towers are constructed utilizing scaffolding frames,cross braces, guardrail brace, planks, stairs. The stair towers are set for7' scaffolding bay, and for 5', 6'4", 6'6", 6'7", 6'8" heights to meet different frame heights.

Economical Mesh Ladder, Step Ladder, Steel Ladder, Straight Stair for Frame Scaffolding

Mesh Ladders / Step Ladders / Steel Ladders / Straight Stairs are the economical stair acesses for H frames. The stair treads are made by 52x26x2.0mm steel oval tube, and the treads are made by mesh plates or punched hole plates or strip plates. They are used for 1219x1930mm H frames or cross lock scaffolding, for 1.83m or 2m scaffold bay.

1.5m Hot Dip Galvanized Steel Stairway for Kwistage System Scaffolding

Kwikstage Stairway (Steel) is the safe & easy solution for vertical access in lightweight with non-slip treads and platform. It is fabricated and designed to fit in a 1.27x2.44m scaffolding bay with 1.5m lift height. It is a specially design to fit in 1.2m tranom for two stairs side by side installation. The stairs are hot dip galvanized.

2.0m Aluminum Stretcher Stairs for Kwikstage System Scaffolding

2.0m Aluminum Stretcher Stairs are designed specifically for use with the traditional steel kwikstage system scaffolding. They are pre-fabricated and designed to fit in a 1.27m x 2.44m bay with a 2.0m lift. The stair ends are flat so that it can lay on the transoms. The stairs are 560mm wide with a rise of 230mm. Two stairs (lift and right stretcher stair) will fit perfectly side by side on a 1.27m transom bay.

6061-T6 Aluminum Stretcher Stairs with Hooks for Modular Scaffolding System

2.0m Aluminum Stretcher Stairs with Hooks are the type of stretcher stair with long u-shape hook welded at the two ends. By thehooks, the stairs can widely use for all kinds of modular scaffolding system, such as kwikstage, ring lock, cup lock scaffolding. They are pre-fabricated and designed to fit in a 1.27m x 2.44m bay with a 2.0m lift. The stair ends are flat so that it can lay on the transoms. The stairs are 560mm wide with a rise of 230mm. Two stairs (lift and right stretcher stair) will fit perfectly side by side on a 1.27m O-ledger bay.

Powder Coated Steel Access Ladder for Frame Scaffolding

Access Ladder is the light vertical access device for frame scaffolding. It uses ladder bracket to attach the ladder to the scaffold frame leg.

Powder Coated Snap On Lock American Scaffolding Frames

Snap On Lock Frame Scaffolding Frame is kind of regional scaffolding system which is popular in California, U.S.A. It is designed and complied to the requirements of OHSA & ANSI A10.8. Its cross braces and guard rail braces have special design to match the snap on lock. The frame is fabricated by dia.1.625"x0.09" high quality steel tubes and the width is 3' or 5'. The finishing is powder coated. The snap on series frames are used mostly for residential building construction.

Powder Coated Flip Lock American Scaffolding Frame

American Type Flip Lock Series Scaffolding Frame is designed and complied to the requirements of OHSA & ANSI A10.8. It is made by dia.1.625" or 1.69" high quality steel tubes with thickness 0.09" or 0.095". The locking device is flip lock. The frame is in 3' or 5' wide, and finishing is powder coating.

Powder Coated American Scaffolding Frames with Drop Lock

American Type Drop Lock Series Scaffolding Frame is designed and complied to the requirements of OHSA & ANSI A10.8. It is made by dia. 1.69"x0.095" thickness high quality steel tubes. The locking device is Drop Lock . The frame is in 3' or 5' wide, and finishing is powder coating.

Powder Coated Canadian Type of Frame Scaffolding

Canadian Lock Series Scaffolding Frames are manufactured using high strength 1.69″ O.D. x 0.095"t steel tubing, and feature fully coped joints for superior strength and durability. The frames are available in Blue Powder Coated, or Hot-dipped Galvanized finish. All of our frames come with pair of 1″ coupling pins and spring retainers, to keep them attached to the top of the frames. The frames are designed to meet or exceed both CSA and OSHA standards.

AS/NZS Australian A Frame Scaffolding

A Frame Scaffolding system is a kind of galvanized scaffolding frame which is popular in Australia. A frames are fabricated by O.D. 48.3x3.25mm/3.0mm and O.D. 27x2.3mm galvanized tubes, or they are fabricated by black tubes and then do hot dip galvanized. The scaffolds are designed and complied to the requirements of AS 1576. The scaffold frames are widely used for residential house projects for scaffolding access. The components and accessoies of A frame system mainly include: A frame, Cross Brace, Handrail Brace, Handrail Post, Interlock Steel Plank, Mesh Gate (Mesh Panel), Ladder Access Gate, Hop Up Bracket, Ladder, Base Jack (Base Plate), Coupling Pin, and so on.

Chinese Traditional Painted Frame Scaffolding

Frame Scaffolding is the earliest type of scaffolding using in China. There are walk through frames and mason frames, also called H frames. They are fabricated by O.D.42x2.2mm steel tubes. Frame Scaffolding Components include Vertical Main Frames, Cross Braces, Coupling Pins and Cat Walk Boards with hooks. The Frame Scaffolding is quick erection scaffolding by main frame lock pins and cross braces. For Mobile Scaffold Tower, H Frame scaffolding used with Castor Wheels and Adjustable screw jack bases.

Adjustable Screw Jacks for System Scaffolding

System Scaffolding Screw Jack is the adjustable base for modular system scaffolding. It provides not only heavy duty load bearing support to the scaffolding, but also provide leveling adjustment. Solid screw jack is made by the solid steel rod with dia.37.5mm after rolling the thread. Hollow screw jack is made by O.D 38x5mm or 5.5mm sealess steel tube. The jack nut is made by cast steel and to hold O.D 48.3mm scaffolding tube or O.D 60.3mm Shoring scaffold tube. Base plate is made by 6-8mm carbon steel.

Galvanized Base Jacks for Frame Scaffolding

Frame Scaffolding Screw Jack is the adjustable base jack for H frame scaffolding. It provides not only heavy duty load bearing support to the scaffolding, but also provide leveling adjustment. Solid screw jack is made by the solid steel rod with dia.34mm after rolling the thread. Hollow screw jack is made by O.D 34x4mm sealess steel tube. The jack nut is made by cast steel and to hold O.D 42-48mm frame leg tube. Base plate is made by 5-6mm carbon steel.

Punched Hole Cross Braces for H Frames

Punched Hole Cross braces enable scaffolding frames to maximize their loading capacity by balancing the frames on both ends.

Snap On Cross Braces for American Scaffolding Frames

Snap On Cross braces enable scaffolding frames to maximize their loading capacity by balancing the frames on both ends.

Punched Hole Guard Rail Brace for Frame Scaffolding

Guardrail Brace is one important part of frame scaffolding system, it provides fall protection to the people when working on the scaffold platform. Scaffold guard rail is made by dia.1.25" x 0.0787"t (O.D 32x2.0mm) pre-galvanized tube, or by black tube and then do electric galvanized, which endures hits and all kind of forces, preventing a person from leaving the area bounded by the platform.

Galvanized Snap On Guard Rail Braces for Scaffolding Frames

Guardrail Brace is one important part of frame scaffolding system, it provides fall protection to the people when working on the scaffold platform. Scaffold guard rail is made by dia.1.25" x 0.0787"t (O.D 32x2.0mm) pre-galvanized tube, or by black tube and then do electric galvanized, which endures hits and all kind of forces, preventing a person from leaving the area bounded by the platform. Snap On Guard Rail is matched for Snap on Series Frame Scaffolding and Guardrail Post.

Powder Coated Scaffolding Guardrail Post for Scaffolding Frames

Guardrail Posts are set up on top of the scaffolding platform for installing guardrail braces. They provide fall protection to the people when working on the scaffold platform. Guardrail Posts are made by dia.1.65" x 0.09"t (O.D 42x2.3mm) or dia. 1.69"x0.095"t (O.D 43x2.5mm) steel tubes. They are strong engough to hold the guardrail braces.

Powder Coated Angle Iron Side Bracket with Bell Hanger

Side brackets allow for the extension of the scaffold platform beyond the legs, usually by a multiple of plank widths. When used with frame scaffolds, the side bracket is placed at the leg and is parallel to the frame or bearer. Angle Iron Side Bracket is the kind of bracket made by angle iron, with bell hanger.

Powder Coated Tubular Side Bracket with Saddle Hanger

Side brackets allow for the extension of the scaffold platform beyond the legs, usually by a multiple of plank widths. When used with frame scaffolds, the side bracket is placed at the leg and is parallel to the frame or bearer. Tubular Side Bracket is the kind of bracket that made by dia.1.65"x0.09"t (O.D 42x2.3mm) steel tube and with saddle hanger.

Powder Coated Tubular End Bracket

End Bracket is the type of extension bracket, used to extend the platform at the end of a scaffold run. The end bracket is also placed at the leg but is perpendicular to the frame or bearer. Tubular End Bracket is made by dia.1.65"x0.09"t (O.D 42x2.3mm) steel tube and with bell hanger or saddle hanger.

Putlog, Putlog Truss for Frame Scaffolding

Scaffold Putlogs are used to span doorways to build around obstructions to connect frame towers and to solve other long-span applications.

Galvanized Scaffolding Locks and Pins

Scaffolding Locks and Pins are the necessary parts and safety devices for scaffolding system.

Galvanized Scaffolding Double Couplers

Scaffolding Couplers are the fittings for fixing and stabilizing the steel tubular scfolding. Simple, orthogonal, sviwel,fixed couplings for worksite barrier, couplings for beams and many other types. We supply various types of BS1139 / EN74 / AS 1576 / ANSI Standard forged or pressed Double Coupler, Swivel Clamp, Beam Clamp Girder, Sleeve Coupler, Putlog Coupler, Board Clamp...

Hot Dip Galvanized Twist Lock Scaffolding Tubes

Scaffolding Twist Lock Tubes are made from Hot Dip Galvanized Steel and meet OSHA and ANSI requirements. Tube-Lock is designed for the construction of independent scaffolds and can also be used in industry, shipbuilding and the aircraft industry.

Rubber Scaffolding Casters Wheel, PU Casters

Scaffolding Casters are the important components both for steel and alumnium scaffolding, they provide movable, convenient and safe load capacity for mobile scaffolding towers.

Powder Coated Folding Trestle for Plastering

Folding Trestle provides elevated access to work areas from ground level. The open trestle allows installation of scaffold planks on the rungs. The general purpose of Trestle Scaffolding is for masonry block brick works, plastering, repairing, painting and electrcain.

Aluminum Ring Lock Scaffolding Standard Vertical

Aluminum Ring Lock Scaffolding is the industry standard for modular scaffolding and offers unbeatable durability, simplicity and versatility. Ring Lock is the scaffolding of choice globally for residential building, industrial, construction sites, aircraft building and maintenance, performing arts and large events, and so on.

Aluminum Ring Lock Scaffolding Ledger

Aluminum Ring Lock Scaffolding is the industry standard for modular scaffolding and offers unbeatable durability, simplicity and versatility. Ring Lock is the scaffolding of choice globally for residential building, industrial, construction sites, aircraft building and maintenance, performing arts and large events, and so on. Main components of Aluminium Ring Lock Scaffolding: Standard, Ledger, Diagonal Brace, Level Brace, Transom, Hop Up Bracket, Full Aluminum Deck (Plank), Aluminum Plywood Deck, Stair, Truss Transom, Girder Beam, and so on.

Aluminum Ring Lock Scaffolding Diagonal Brace

Advantage of Aluminium Ring Lock Scaffolding: Quick erection and dismantling: Ringlock scaffold is all pre-measured and just a hammer is required when erection. Safety: The reliable wedge connections prevent ledgers and diagonal braces from any kind of loosening. The rigid, right fit of all connections with concentric derivation of loads guarantees safety even at great heights. Main components of Aluminium Ring Lock Scaffolding: Standard, Ledger, Diagonal Brace, Level Brace, Transom, Hop Up Bracket, Full Aluminum Deck (Plank), Aluminum Plywood Deck, Stair, Truss Transom, Girder Beam, and so on.

Aluminum Kwikstage Scaffolding Standard / Vertical

Aluminium Kwikstage system provides a highly flexible and easy to assemble scaffolding system that has been designed along the same lines as the steel Kwikstage range of products.

Aluminum Kwikstage Scaffolding Ledger / Horizontal

Aluminium Kwikstage Scaffolding system provides a highly flexible and easy to assemble scaffolding system that has been designed along the same lines as the steel Kwikstage range of products.

Showing 2 to 3 of 3 (2 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.