Factory Supply sensor ,All Kinds Of Electronic Products

Off center Load Cell for Portable scale Kitchen scale sensor NA34

The NA34 is a low capacity load cell and can be used individually in kitchen scales and portable scales. The moment insensitive design allows for simple installations.

Postage scale Load Cell low profile weighing sensor NA33

The NA33 is a low profile load cell and can be used individually in postage scales. The moment insensitive design allows for simple installations.

Small weight sensor aluminum load cell NA7/B

The NA7/B is a small weight sensor with aluminum alloy construction. The Low capacity load cell is easy to install and suitable for the pricing scale, counting scale and balance.

Low profile precision load cell weight sensor wholesale NA8

The NA8 is a precision load cell made with aluminum alloy material. The range capacities of Low profile load cell is from 60kg to 200kg, suitable for the pricing scale, counting scale and other electronic weighing scales..

Single point load cell Aluminum weight sensor NA1/H

NA1/H is a low profile single point load cell with aluminum construction and surface anodized, suitable for a wide range of retail scales.

Aluminum Shear beam load cell for platform scale NB1

NB1 aluminum shear beam load cell is made with anodised aluminum alloy material, environmentally sealed by potting. The weighing scale sensor is suitable for various type of hopper scales, platform scales.

Shear beam load cell for floor scale NB2

NB2 shear beam load cells are designed specifically for high accuracy applications in tank and vessel weighing, filling systems, platform scales, bagging machinery, belt scales and conveyor systems. Our mavin single end beam load cell could completely be matched toToledo load cell, Zemic load cell or Keli load cell.

Floor scale beam load cell 2.5-7.5t NB3

NB3 is one of popular Single Ended Shear Beam load cell for applications such as industrial floor scales, barrel scales, and low to medium capacity vessel weighing. The floor scale load cells are available in a range of environmental sealing up to IP67.

Single Ended load cell weighing sensor for hopper scales NB4

Single Ended Load Cells are ideal for a wide range of applications such as hopper scales or fixed suspended weigh systems, process weighing and low profile installations. The Shear Beam load cells are easily mounted on top with threaded hole and two through holes.

Nickel plated steel alloy Shear Beam Load Cell NB5

NB5 is a steel alloy shear beam load cell sealed to IP67, nickel plated and suitable for most weighing applications. The hopper scale Load cell capacities ranging from 500kg to 3t are available.

Single Ended Shear Beam Load Cell NB9

Single ended shear beam load cells are ideally suited to all industrial weighing scale and general load measurement applications, including vessel, tank, silo and process weighing. The beam load cell range starts with capacities from 500kg through to 3 tones.

Pressure transducer Stainless steel Force Sensor NP3

The NP3 is an Oil Forced Pressure Transducer. With a special purpose for testing force, the stainless steel force sensor is suitable for Force measurement, Fork Lift Truck scale, Industrial weighing scale, Automation weighing systems.

Tension and compression load cell stud type transducer NY5

The NY5 is a customizable designed stud mounted load cell with wide capacity range up to 500kg, suitable for Forklift Scale load cell, Batching scale load cell, and Industrial weighing scale. The tension and compression load cell precision is 0.15% R.O.

Crane scale load cell sensor for silo tank weighing system NY3

Crane type load cell NY3 is made with steel alloy material and compact design, suitable for silo tank weighing systems. The crane scale load cell precision is 0.03% R.O, with wide capacity range up to 20t.

Column Type load cell compression force sensor NC4

The NC4 is a Column Type load cell, with a higher capacity up to 60T, The compression load cell is mad e of Stainless Steel material used for Truck Scale, Rail weighbridge, Hopper Scale, Industrial weighing system. Complete accessory equipped for quality guarantee of column load cell sensor.

Load cell adjust foot M12 M16 M18 for NB series

The load cell adjust foot is made with steel alloy material, assembled with shear beam load cell NB series.

Load Cell Pressure Head M12 M16 M18 for NB series

The load cell pressure head is made with steel alloy material, assembled with shear beam load cell NB series.

Load Cell Accessory Cup and Ball Set M12 M18 for NB series

The load cell cup and ball set is made with steel alloy material, assembled with shear beam load cell NB series.

Steel Alloy S Beam Tension Load Cell NS1

S Beam Load Cell NS1 offers a compact design for platforms, silos, or scales. The tension Load Cell has a wide range of capacities from 100kg to 1000kg, comes in steel alloy construction.

S Type Load Cell 1-2t for Crane Scale NS2

NS2 S Type Load Cell is applied with "S" appearance, high accuracy, good stability and made of best alloy steel. This force transducer is suitable for crane scale, hopper scale, hock balance, burden balance, building machinery fields and so on.

S type compression and tension force sensor 5-7.5t NS3

The S type force transducer NS3 is designed to measure tensile or pulling loads. A typical use of S type tension load cell is for hanging scales and they are also popular for vessel weighing.

S-Type Tension Load Cell for Hopper Scale NS4

S type load cell NS4 is suitable for many applications where a tension and compression load cell is required, for high accuracy measurements. The tension sensor is available for applications such as vessel weighing, material test machines, crane scale and hopper scale.

Aluminum S Beam Tension force Load Cell NS6

NS6 tension load cell is made with anodised aluminum alloy material, environmentally sealed by potting. The S beam sensor is ideal for measuring both tensile and compressive forces, offering a highly cost effective solution for a wide variety of applications.

Aluminum Alloy S Beam force Sensor NS7

NS7 is S beam force sensor with good protection and high accuracy. The Aluminum S beam construction load cell is suitable for applications such as hanging scale and hopper scale with low capacity from10kgto20kg.

S type steel alloy tension load cell NS13

NS13 is S type alloy steel load cell with compact structure and overload protection, easy to install and available in a range of environmental sealing up to IP67. The tension force sensor is with 0.03% R.O. accuracy.

Tension compression strain gauge based load cell NS18

The tension and compression load cell NS18 offer a high level of corrosive resistance for use in harsh environments with IP67 protection class, available in a wide range of capacities from20kgto over 10 tones. The S type load cell is utilized metal foil strain gauge technology.

Low Capacity force sensor high precision S type load cell NS22

NS22 S type load cell is calibrated to national standards, with high accuracy 0.02% R.O. The strain gauge based load cell is made with aluminum alloy construction for low capacities, while steel alloy for higher capacities

Low profile pancake Aluminum Load Cell for Batching Scale 50-500kg NQ1

The NQ1 is a smaller dimension Aluminum Wheel shaped load cell for a wide capacity range for Batching Scale, Industrial weighing systems, Potting Compound with waterproof connector sealed to guarantee stable quality of performance.

Pancake type compression load cell Wheel Shaped transducer 1-20T NQ12

The NQ12 is a pancake load cell, medium dimension, Steel Alloy Wheel shaped load cell for a higher capacity range for Industrial Scale load cell, Batching scale load cell, Boat Scale load cell, Customizable spoke type load cell, Laser welding sealed with waterproof connector to guarantee stable quality of performance.

Wheel shaped compression force load cell 200KN NQ18

The NQ18 is a customizable designed spoke type load cell, bigger dimension, Steel alloy wheel shaped load cell for a higher capacity range for Industrial Scale load cell, Batching scale load cell, Boat Scale load cell with waterproof connector to guarantee stable quality of performance.

Nickel plated steel alloy double ended shear beam Load Cell ND1

The ND1 is a double ended shear beam load cell, Painted Alloy Steel mounting assembly load cell for a wide capacity range for Truck Scale, Industrial weighing systems, Rail scale, Hopper scale, Road scale, Potting Compound with waterproof connector sealed to guarantee stable quality of performance.

All products