All products

Shoe Water Resistance Tester H009

To determine the waterproofness property for finished shoes. Within the specified depth of water, whole shoe will be mechanically brushed by rotary wet brush, so as to measure the water penetration property for finished shoe.

Shoes Stiffness Tester H012

To determine resistance to flex property for finished shoes.

NBS Rubber Abrasion Tester H014

To determine the abrasion resistance property for rubber or other compounds, sole and heel materials which are not less than 2.54mm in thickness. This machine has memory function so that users can set the number of tests by themselves. The current records will be kept not to change even if power failure or stop occurs. It also can be connected to a cleaner for easy cleaning.

DIN Abrasion Tester H015

Din abrasion tester is mainly to test the abrasion-resistance to specimen by specify sand papers, and measure the condition of abrasion, loss of weight, loss of volume, thickness of abrasion etc. to compare the result of standard rubber and obtain result. With abrasion and tearing function, this device is applicable for testing elastic material, rubber, tire, conveyor belt, shoe sole, transmission belt, and shoe sole, soft synthetic leather, etc.

AKRON Abrasion Tester H016

UTS H016 Akron Abrasion Tester combines with balance to use. Designed to test the abrasion resistance property of shoe sole, tire which is made of rubber and elastic materials. Counter adopts electronic automatic type, able to set abrasion revolution, machine stop automatically after reach preset revolution. It is to determine abrasion resistance property via measure the abrasion volume after sample wear grinding wheel.

ROSS Flexing Tester H017A-1

Applicable for flexing resistance test for rubber products, shoe soles, PVC, PU, TPR foam and other materials. After repeatedly flexing and bending, check its degree of damage, crack and deterioration. It has the memory function.

Low Temperature ROSS Flexing Tester H017B

Flexing tests are sometimes required to be carried out at low temperatures below 0°C. This low temperature version of the Ross flex test is built into a low temperature cabinet. It is used for the flex testing of sole unit samples(including rubber products, shoe soles, PVC, PU, TPR foam and other materials) to assess the effect of flexing under low temperature conditions. After repeatedly flexing and bending, check its degree of damage, crack and deterioration. It has 12 stations for small samples but can also accommodate larger samples by adjusting the mechanism.

EN Sole Flexing Tester H018

This device is designed to do repeated flexing test for shoe soles.

Heel Impact Tester H025

To determine resistance of sole to impact load. When test, each time increase impact energy until heal break / rupture and read impact index.

Heel Fatigue Tester H026

To test resistance to repeated impact property for medium and high heels of female’s shoes at wearing state.

Safety Shoes Impact Tester H028

To test resistance of steel head of safety shoes to impact and inspect its sinking degree to determine shoes safety quality.

Shoe Material Heat Resistance Tester H032

To determine the heat resistance property for sole materials(upper, lining and soling materials) during shoes manufacturing process including crimping, embossing, toe and seat flagging, hot blasting etc.

Outsole Belt Flexing Tester H034

To determine resistance to flex property for shoes outsole. Simulating walking state with wearing shoes to do test, so as to measure sample shoes outsole the property of resistance to bend. Testing times can be set freely, machine stop to work automatically when test times reached. Available to test multiple samples simultaneously to improve working efficiency.

Elastic Tape Fatigue Testing Machine H039

To determine repeated extensibility of elastic tape, cloth and other elastic materials under the maximum stretch. As well as fatigue property for any extensible materials.

Sample Buffing Machine H045

To grind the surface of test materials and get the specified thickness for testing. Operate by wrench and adjust the position at up and down, left and right, back and forth.

IULTCS Leather Abrasion Tester H046

IULTCS & Veslic Leather Abrasion Tester is designed to do rub fastness test on the surface of leather, plastic and textile materials. So as to determine the amount of marring of leather surface or finish and the amount of color transfer to the wool felt. Dry and wet abrasion tests are available.

Shoelace Rubbing Tester H047

UTS H047 Shoelace abrasion tester is to determine abrasion resistance property for various shoelace which is knitted from cotton, flax and chemical fiber materials.

Vamp Material Flexing Tester H049A

To determine flexing resistance or physical damage for all of vamp soft materials including leather, clothing and upholstery coverings. It also can be used to test seam construction during flexing.

Martindale Abrasion Tester H056A

To determine the abrasion resistance of all types of fabrics and leather used for footwear, upholstery, clothing, gloves and many other products. Also can be used for testing the abrasion resistance of rubber gloves, plastic and rubber coated fabrics by substituting the standard abradant with a grit paper.

Bally Leather Flexing Tester H053A

To determine resistance to flex property for leather, fabric, etc. Assess the flexing resistance of leather by damage condition of samples after flexing for a certain of times.

Martindale Abrasion Tester H056B

To determine the abrasion resistance of all types of fabrics and leather used for footwear, upholstery, clothing, gloves and many other products. Also can be used for testing the abrasion resistance of rubber gloves, plastic and rubber coated fabrics by substituting the standard abradant with a grit paper.

Circular Blade Cut Resistance Tester H061

To determine blade cut resistance property for the protective area of safety gloves in accordance with EN 388 (Clause 6.2), excluding the gloves made by very hard materials.

Leather Cracking Testing Machine H062A

UTS H062A Leather cracking testing machine is designed to test the cracking resistance index for uppers, various thin leather and surface of leather.

GB Shoe Peeling Strength Tester H066A

UTS H066A GB Shoe Peeling Strength Tester is suitable for the test method of peel strength between shoe sole and upper.

Density Balance & Densimeter H076

To test the density for Solid, liquid, powder and water absorbent material etc.

Thickness Gauge H079

This thickness is used to measure the thickness for leather, Synthetic and rubber. It is crucial that any thickness gauge applies a controlled pressure (kPa) to the material whose thickness is being measured. UTS uses a deadweight system removing the uncertainty of other mechanical devices.

Universal Testing Machine(Dual Column) H001

Tensile testing is used in many industries for research, quality and process control. It is designed to determine tensile, compression, bending, shearing force, bonding force, peeling, tearing test, etc, for leather, rubber, plastic, textile, metal, nylon thread, paper and materials of footwear, packaging, aviation, petrochemical, construction, electrical, vehicle, etc. The English software supplied runs on customers’ computer systems, the program provides a particular strength to the machine operation, allowing pre-load of a wide range of test methods and available for exporting, storage and analysis of results. Ready-to-load software together with specific test grips can be provided for various tests.

Brittleness Temperature Tester HP01

Brittleness Temperature Tester is to determine the brittleness characteristic during low temperature testing for wire jacket and vulcanized rubber. Sample is impacted by impact head at a linear speed of 2±0.2m/s after sample fixed onto the test device is soaked into a medium at low temperature for 5 minutes. And then check whether the sample appears cracks, crevices, small holes and fragments at the lowest temperature.

Melt Flow Index Tester HP03

Plastic melt flow index tester is used for determination of melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production factory and science and research institute.

Micro-Computer Tensile Test Machine H004

This tensile tester has wide function with different clamps equipped to test tensile strength, elongation, tear, adhesion, tensile stress, stripping, shear force, bonding force between rubber and metal, etc. Applicable for shoe sole, tire, rubber tube, triangle tape, plastic sheeting, plastic sheet, packaging film, acrylic, FRP,ABS, EVA, PV, etc.

Dynamic Footwear Water Resistance Tester H007-4

This device is to determine all types of shoes dynamic water resistance property.

Steel Shanks Fatigue Resistance Tester H041

To determine the fatigue resistance property of steel shanks of various types of shoes under specified conditions.

Leather Softness Tester H055

Designed for coated fabric in the leather industry, textile industry and other flexible fabric softness and test design only. The material under test clamp on the known size of test hole, and then through a small aperture will load imposed on the fabric, on the dial pointer deflection value.

Shoelace Against Eyelets Abrasion Tester H048

To determine the the resistance of all shoelaces and eyelets to abrasion. The shoelace passes through the eyelet at a specified angle, and then shoelace moves up and down repeatedly under a standard load. 6 sets of specimens can be tested once.

Linear Abrasion Tester H067

This tester is suitable for testing the wear resistance property of plastic, auto parts, rubber, leather and textile, electroplating, free disassembly of components, paint, printing products, etc. Not only can be used to evaluate the product wear resistance, also can be used to evaluate the scratch resistance of the product single or multiple scratches and colours of transitivity. Dry abrasion test and wet abrasion test are available.

Maeser Water Penetration Tester H050

This machine is used to measure the ability of the shoe surface material to resist water penetration during flexing.

Compression Rebound Tester H030

This machine is used to test the resilience of rubber products after a certain amount of time and pressure.

Compression and deformation tester H031

The instrument is used in static compression test of rubber.

Vertical Rebound Resilience Tester H090

To determine the impact resilience of solid rubber from measurement of the vertical rebound of a dropped mass. It is not applicable to the testing of cellular rubbers or coated fabrics.

Slip Resistance Tester H043

To test the friction coefficient of finished shoe sole, sole front or heel, so as to determine shoes slip resistance property.

Showing 5 to 7 of 7 (5 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.