All products

Kinetic Energy Tester T011

T011 Kinetic Energy Tester is used to test the maximum energy produced from projectile toy shoot bullets or launched bows, so as to evaluate ejection articles will cause injury for children or not.

Toy Dynamic Strength (2m/s) Tester T012

T012 Dynamic Strength & 2m/s Tester is used test dynamic strength for wheeled ride-on toys. Simulate children wheeled ride-on toys vertically crush the inelastic step 50 x 50 mm at the stable speed of 2m/s±0.2/s, and then check the damage degree. This device can be used for children ride-on toys, such as children tricycle, toy bikes, scooters, etc.

Automatic Corrugated Fibreboard Bursting Strength Tester A001

A001Automatic Corrugated Fibreboard Bursting Strength Tester is used to test the bursting resistance strength property for corrugated fibreboard, corrugated case. Applicable for paperboard production enterprises, carton production enterprises, cartons use enterprises, scientific research institutions, etc.

COBB Cobb Absorption Tester A003A

To determine the water absorptiveness of sized paper and board, including corrugated fiberboard, under standard conditions. It may not suitable for paper of grammage less than 50g/m2 or embossed paper. It is not suitable for porous papers such as newsprint or unsized papers such as blotting paper or other papers having a relatively high water absorptivenss for which ISO 8787 is more suitable. This instrument is only capable of testing surface water absorption of paper and board. It is not applicable to exactly evaluate the writing performance of paper and board.

COBB Absorption Cutter A003B

This device is a necessary sampler of absorption test, it is an ideal test apparatus of the corrugated board and carton production, research and quality supervision, inspection and other departments. It is suitable for short fiber thinner paper sampling.

Paper Thickness Tester A007B

Paper thickness tester is to test thickness of paper and board, test films, mica plate, etc .

Paper Ash Tester A008

To determine the ash content of the material.

Paper and Board Folding Tester A010

Paper folding tester is used to test folding time of paper, it can also be used to test other materails that need to have endure folding function, such as case board, craft paper, paperboard, corrugated paper grey paper.

Slice Materials Air Permeability Tester( Schopper method ) A013

Air permeance tester is used to test air permeance performance of all kinds of slice materials, such as textiles, films, paper, nonwowens, filter materials ,and so on. this tester is control by single chip microcomputer, and can automatic work, is an advanced equipment for paper industry, textiles industry, and leader industry.

Paper Tensile Strength Tester A014B

To determine tensile strength, peel strength, deformation rate, tear strength, puncture power, heat seal strength, low unwind force and other performance for paper, plastic films, bag, plastic products,laminated films and other sticky materials. Electric power tensile tester can be customized based on different test grips to meet various tension and compression tests. Rally stepless unique features to meet the speed requirements for different tests.

Crush Tester A015

Crush tester is designed to test Ring Crush Test (RCT), Edge Crush Test (ECT). Flat Crush Test (FCT), Pin Adhesion Test(PAT) and Concora Medium Test(CMT). It’s a basic equipment to test the crushing strength for various papers, including corrugated board, tubes, paper and plastics.

Needle Flame Tester TF02

Needle flame tester is made based on standards IEC60695, GB5169. Mainly used to simulate products internal generates small flame under the breakdown situation, and assess its ignition hazard. Applicable for testing flammability of electronic electrical equipment and its components and elements, solid electrical insulation or other combustible materials. Needle flame test method can be used for the situation when small parts or component are not suitable to do glow wire test or horizontal vertical combustion test method.

Horizontal Thrust Tester UTS-TS01

To assess the stability property for activity toys(such as climbing rack, swing, etc) with a free height of fall of 600 mm or less.

Guardrails And Armrest Dynamic Strength Tester TS02

To determine the dynamic strength for barriers and handrails.

Simulation Head Tester TS03

Test for head and neck entrapment.

Probe V TS04

Test template D for assessment of head and neck entrapment in partially bound and V-shaped openings

Swing Suspension Connector Durability Tester TS11

Durability test for suspension connectors and means of suspension.

Glow Wire Tester TF01

Glow wire tester is to assess the fire hazard affected by thermal stress which is generated from the heat source of glow-wire component or overload resistance within short time. Widely applicable for testing fire hazard test for electrical and electronic products, household appliances and their materials, also non-flame ignition test, so as to determine the related materials’ glow wire ignition temperature, flammability and flammability index.

Steel Ball Impact Tester T028

Steel ball impact tester is to test the impact resistance for all rigid toys which cover face including space helmets, goggles or face shields. Based on standard requirements, after testing, toys shall not produce sharp edges, sharp points or loose parts which could enter eyes. If so, then conduct follow tests via sharp edge tester, sharp point tester and small part cylinder.

Impact Hammer T062

Impact test hammer is used to check the mechanical shock resistance of enclosures(appliances shell) for electrical appliances of other electronic products. If damage occurs from the spring operated impact test. The spring operated impact test hammer simulates the mechanical impact to which electrical equipment may be subjected. This impact test hammer is mainly used to test household and similar electrical appliances shell, lever, handle, knobs, lights and other shell to withstand mechanical shocks.The impact tester made of stainless steel or alloy.

Surface Flash Tester T013

To determine the flammability property for fluff or fur fabrics (except floor coverings).

Horizontal and Vertical Flammability Tester TF03

Horizontal and vertical flammability tester is applicable to solid and celluar materials that have an apparent density of not less than 250kg/m3, determined in accordance with ISO 845. And plastic materials used in consumer electric devices and appliances.

Tracking Index Test Equipment TF04

Lighting equipment, low-voltage electrical appliances, household appliances, machine tool electrical appliances, motor, electric tools, electronic equipment, electrical instruments, information technology equipment, insulation materials, engineering plastics industry, electrical fittings, auxiliary parts.

EN Drop Floor T035A

Drop Floor is to determine the toys fall on the floor under a specify height and drop times, and then check if toys produce accessible small parts, hazardous sharp edges, hazardous sharp point or hazardous driven construction, etc.

Ball Pressure Tester TE04

Ball pressure test device is use for heat resistance test to verify the heat resistant performance of insulating material covers and outer parts of the electric appliance .

Paper and Board Smoothness Tester(Bekk Method) UTS-AD12

UTS-AD12 Paper and Board Smoothness Tester(Bekk Method) is used to test smoothness of paper and board, it is according to the international principle of Bekk mathod, it can be used for paper making company, printing company, quality supervision department, universities, and so on .

Internal Bonding Strength- Scott Type A031

To determine the internal bond strength for various paper and board materials according to TAPPI T 569.

Programmable Temperature and Humidity Chamber E001

E001 Programmable Temperature and Humidity Chamber is to determine resistance to hot, cold, dry and moisture property for various material. Applicable for products quality management of electronic, electrical appliances, food, vehicles, metals, chemicals, building materials, etc.

Salt Spray Tester E002

This instrument is mainly to do surface processing for various materials, including paints, electroplate, inorganic and anti-rust oil, and after anticorrosion treatment, test the corrosion resistance of their products.

Thermal Shock Tester E003

Thermal Shock Tester, which is used to test the endurance degree for composite material and structure, under the instant and continuous environment of extremely high temperature and low temperature, i.e., test its chemical or physical damage due to heat-expansion and cold-contraction by shotest time. Applicable objects including metals, plastics, rubber, electronics, etc.

Constant temperature and humidity chamber E005

Constant temperature and humidity chamber-Balance the temperature and humidity of sample textile materials and fabrics. Advanced air-cooling is adopted.High efficiency,compact size,energy saving and attractive appearance.

Cooling and Heating Circulation Tank MP10C

Cooling and Heating Circulation Tank integrates the company's years of design and production experience, introduces and digests the German technology, widely applies to the petroleum, he life science, the measurement, the light industry,scientific research and so on domain.

Walk In Salt Spray Chamber E002-8000L

The salt spray chamber is mainly used for surface treatment of various materials, and is suitable for testing the corrosion resistance of products in the aerospace industry, automotive electronics, electronic and electrical fields.

Precision Constant Temperature Water Bath W001

Precision constant temperature water bath is made of stainless steel, which is beautiful in appearance, digital display, microcomputer controlled and easy to use.

Mileage Tester B001

This product is used for luggage luggage wheels wheel axle moving test, to test the wheel material abrasion resistance and the overall structure of the box with or without, the deformation and failure situation the result of the test, can be reference for improvement.

Luggage Vibration Impact Tester B002

Aims to test package, sewing and the strength of the overall structure, such as bags with load, impact test at a speed of 20 times per minute, the test results can be used as a reference product improvement.

Luggage Comprehensive Function Tester B003

This machine is used in the motion of the book bags and drop test, give the book bag to load a certain load, suspension clamp on the machine, swing a certain number of times at a certain point of view, or static vertical drop after certain time, to test the straps book bag, carry, adjust the shackle is rigid connection and measuring the function of the deformation of the unit length.

Luggage Drop Tester B004

This product is to simulate luggage/suitcase drops or gets impacts by hard object during transportation and evaluate its damage situation. Available to set drop luggage’s surface, angle and edge tests.

Luggage Wheels Abrasion Tester B005

To determine the resistance to abrasion and vibration during running for wheels and pull rod of luggage(with pull rod and attached with wheels), and whether the whole structure is damage or deformation.

Luggage Handle Durability Tester B006

To determine the durability of luggage handle.

Showing 7 to 7 of 7 (7 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.