Anhui Sinograce Chemical Co., Ltd.-sfyh.com

Styrene Acrylic Emulsion for Wall Coatings SA-210

A new generation of styrene acrylic emulsion developed by imported special auxiliaries and functional monomers. It is normally used for interior and exterior paint. It could formulate high PVC latex paint. It has superior alkali resistance, calcium ion stability, dilution stability and freeze-thaw stability.

Modified silicone acrylic emulsion for exterior wall paint SA-109

SA-109 is modified silicone acrylic emulsion specialized in the external wall coating.It has good properties of scrub resistance, water resistance.

Acrylic Modified Urethane Natural Luster Sealer SA-900

SA-900 is ultra-low VOC water based acrylic modified urethane sealer, which penetrates into the pavers and provides a protective barrier with excellent joint stabilization providing a natural luster.

Acrylic Modified Silicone Hydrophobic Sealer SA-901

SA-901 is water based acrylic modified silicone sealer, which penetrates into the pavers and provides a hydrophobic coating. It can inhibit the algae and mold with good abrasion resistant.

water based polyurethane Sealer SA-902

SA-902 is a waterbased polyurethane sealant that penetrates into the slate road and has a hydrophobic function, good abrasion resistance, water resistance, and can inhibit the growth of seaweed and mold.

One Component Hydrophilic Water-Soluble Polyurethane Water-stop Foam Gel/Flex PU-110

It is conventional one component water-soluble polyurethane hydrophobic foam, react with water rapidly to be solidified and expansion to sealing the crack. After reaction with water to form milk-white elastic gel, with advantage performances of fast speed, high strength, and little shrinkage, strong penetration-proof etc., widely used in waterproof works such as the tunnel, the subway, dam, underground garage, sewers, etc.

One Component Oil-Soluble Polyurethane Hydrophobic Foam PU-111

It is one component oil-soluble polyurethane hydrophobic foam, it reacts with water and expands to be a foam does not dissolve in the water. Not only used for waterproof plugging, but also with effect of reinforcement. It is widely used in subway tunnels, water conservancy and hydroelectric power, basement parking, sewage etc. for waterproof plugging and reinforcement projects.

Flexible cementitious waterproofing emulsion SA-400

Acrylic dispersion. Used in adhesives for ceramic tile coverings. Also used for flexible, hydraulic bedding mortars, for flexible, waterproof, two-component cement-bonding mortars and for flexible waterproofing slurries.

Rigid waterproof emulsion WF-500

A Suitable for polymer cement waterproofing slurry and polymer cement waterproof sand

JS cement waterproof emulsion WF-600

A Suitable for polymer cement waterproofing slurry and polymer cement waterproof sand

JS cement waterproof emulsion WF-700

A Suitable for polymer cement waterproofing slurry and polymer cement waterproof sand

JS cement waterproof emulsion WF-800

A Suitable for polymer cement waterproofing slurry and polymer cement waterproof sand

Special resin polymer PF-135

Special resin polymer PF-135 is a kind of special resign polymer, with excellent adhesion to different substrate surfaces, with high hardness.

Special resin polymer PF-136

Special resin polymer for Acrylic Industrial coatings PF-136 is a kind of special resign polymer, with excellent adhesion to different substrate surfaces, with high hardness.

Anti - static floor coating SA-A10

SA-A10 anti-static floor coating is a kind of floor brightener. It is prepared by scientific formula and strict process with acrylic polymer emulsion and additives. It has fast drying speed, high surface brightness, In addition to the effect of ordinary floor polish, anti-static floor coating also has static dissipative function.

Floor care wax coating/Water based floor care coating SA-N10

SA-N10 Floor coating is a kind of concentrate floor brightener. It is prepared by scientific formula and strict process with acrylic polymer emulsion and additives.

Water based polyurethane for textile coating PU-401

Water based polyurethane is designed for adhesive and textile applications. It is very soft with high elongation, good hydrolysis-resistance and good abrasion resistant.

High solid water based polyurethane dispersion PU-402

High solid water based polyurethane dispersion (PUD), universal binder, soft and silky film with low gloss.

Flexible and non-yellowing PU coating for textile PU-403

It is a kind of soft economical co-solvent free polyurethane for a variety of textile or flexible substrate applications.

High gloss water based polyurethane topcoat PU-404

High gloss water based polyurethane dispersion is synthesized by polycarbonate polyol. It has high gloss, good weatherability and aging-resistance.

Water based polyurethane for wood topcoat PU-105

Water based polyurethane is an easy-to-apply, quick clean-up, crystal clear finish for interior wood surfaces. Formulated with state-of-the-art resins, this clear finish is non-yellowing and perfect for use over light or natural wood colors. It dries quickly and can be recoated in only two hours. This extremely durable finish resists abrasion, alcohol, water and virtually all household chemicals. This product has superior hardness and adhesion.

Water based polyurethane for wood primer PU-106

Aromatic polyurethane dispersion is designed for wood primer. It is designed specifically for use on interior and exterior new and unpainted hard and soft wood before applying a paint topcoat.

Water based 2K PU for wood furniture coatings PU-107

Water based 2K polyurethane systems are a new technology which is already successfully used in many applications also for wood coatings and more specifically furniture finishes, without having to sacrifice quality. Some properties like the ease of introduction by hand of the hardener and the determination of the pot-life through the viscosity increase can be optimized by choosing the right solvent to dilute the polyisocyanate.

Water based polyurethane for wood varnish PU-108

Aliphatic polyurethane dispersion is designed for wood paint. It is used for protecting hardwood floors and other wood surfaces. It is fast drying and flows&levels exceptionally well on any wood surface. It dries clear and is non-yellowing to ensure the true natural color of wood.

Water based polyurethane metal primer PU-201

Water based polyurethane is suitable to be used as metal primer. It has strong adhesion force with base material, good color developing and salt-fog resistance.

Water based polyurethane metal topcoat PU-203

PU-203 is water based polyurethane dispersion composed of polycarbonate structure. It is developed high hardness, high gloss, abrasion resistance, water resistant and excellent salt-fog resistance.

Water based polyurethane peelable protective coating PU-205

The peelable coating is designed using water based polyurethane that can be applied to smooth, non-porous surfaces and simply peeled off once dry. All peelable coatings may be applied with water compatible airless sprayers or automatic spray systems to protect surfaces from minor nicks, scratches, abrasions, and any other unwanted contaminants during transit or in completion or assembly during manufacturing.

Water based polyurethane peelable protective coating PU-206

The peelable coating is designed using water based polyurethane that can be applied to smooth, non-porous surfaces and simply peeled off once dry. All peelable coatings may be applied with water compatible airless sprayers or automatic spray systems to protect surfaces from minor nicks, scratches, abrasions, and any other unwanted contaminants during transit or in completion or assembly during manufacturing.

Water based polyurethane peelable protective coating PU-207

The peelable coating is designed using water based polyurethane that can be applied to smooth, non-porous surfaces and simply peeled off once dry. All peelable coatings may be applied with water compatible airless sprayers or automatic spray systems to protect surfaces from minor nicks, scratches, abrasions, and any other unwanted contaminants during transit or in completion or assembly during manufacturing.

Silicone defoaming agent DF-024

DF-024 is silicone-containing defoamer. It is comparable with BYK 024. It has excellent defoaming performance and good compatibility with pigment and other emulsion.

Silicone antifoam agent DF-65

DF-65 is a silicone antifoam agent used to provide defoaming and improve leveling, wetting and slip properties. It is applicable for ink and coating system.

Silicone free antifoam agent DF-222

DF-222 is a liquid defoamer for emulsion paints and adhesive systems. Used for emulsion paints/coatings based on acrylic, styrene-butadiene, polyvinyl chloride and its copolymers, ethylene-vinyl acetate, vinylidene chloride and water-soluble alkyds.

High concentrated silicone defoamer DF-900

DF-900 is a high concentrated silicone defoamer excellent defoamer and deaerator for solvent-based formulations. It is a liquid and has outstanding performance particular in higher viscosity formulations.

Water based coatings defoamer DF-825

DF-825 is an effective defoamer with high compatibility. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer. It has strong defoaming characteristics for clear coat, pigmented and waterborne systems as well as for polyurethane-acrylate binders.

Company profile

All products