All products

Sodium heparin anticoagulation of blood samples

Lithium heparin Content:  [Product Name] Lithium heparin [Package Specification] Plastic bottle, 10g/bottle, 20g/bottle, 50g/bottle [Performance] White amorphous powder, odorless, soluble in water, easy to absorb moisture, average molecular weight of 15,000, stable at room temperature. The potency of lithium heparin of the company is ≥150IU/mg, and the potency of anhydrous litnium heparin is ≥ 160IU/ mg. Other indexes were controlled according to the standard of heparin sodium. [Scope of application] 1. This product is applicable to the collection and anti-coagulation of blood samples for clinical biochemical examination and emergency biochemical examination, as well as the collection and anti-coagulation of blood samples for some hemorheology projects. 2. It is recommended to use lithium heparin as anticoagulant in clinical test to determine the ions in blood, because it is the least likely to interfere with the determination of other ions. 3. This product is not a drug and cannot be used as an injection. It is forbidden to inject directly into human body and animals. [Precautions] In order to ensure adequate anti-coagulation of blood, the heparin salt must be mixed upside down for 5-8 times as soon as possible after blood collection. Especially when the temperature of blood collection environment is higher than 25℃, the mixing of blood and lithium heparin must be timely and sufficient, otherwise it is easy to lead to blood coagulation or local coagulation.

Lithium heparin anticoagulation of blood samples

Lithium heparin Content:  [Product Name] Lithium heparin [Package Specification] Plastic bottle, 10g/bottle, 20g/bottle, 50g/bottle [Performance] White amorphous powder, odorless, soluble in water, easy to absorb moisture, average molecular weight of 15,000, stable at room temperature. The potency of lithium heparin of the company is ≥150IU/mg, and the potency of anhydrous litnium heparin is ≥ 160IU/ mg. Other indexes were controlled according to the standard of heparin sodium.

dipotassium EDTA / EDTA K2 anticoagulation of blood samples

This product is a chemical reagent with strong corrosiveness. It is forbidden to touch it directly. When splashing on the skin, wash with plenty of water. When splashing into eyes, wash with plenty of water immediately. In case of emergency, it should be sent to hospital for examination and treatment immediately.

Tripotassium EDTA / EDTA K3 anticoagulation of blood samples

Tripotassium EDTA / EDTA K3 anticoagulation of blood samples

Blood coagulant (suspension agent) Blood collection additives

Blood coagulant (suspension agent) Blood collection additives

Trometamol Tris Buffer CAS#77-86-1

Buffer preparation in biochemical and molecular biology experiments; pharmaceutical intermediates; preparation of surfactants and vulcanization accelerators; preparation of water-soluble polymers containing Tris structural units as paint dispersants; preparation of indoor formaldehyde adsorption materials, etc.

Tops Chromogenic Substrate Ivd Reagent CAS40567-80-4

It can be used as a water-soluble reagent for the determination of hydrogen peroxide by enzymatic spectrophotometry. It is widely used in diagnostic detection and biochemical tests.

MAOS CAS82692-97-5 Chromogenic Substrate

t can be used as a water-soluble reagent for the determination of hydrogen peroxide by enzymatic spectrophotometry. It is widely used in diagnostic detection and biochemical tests.

serum separation gel / blood separation gel Blood collection additives

The product is colorless and transparent colloid with light smell and no impurities; it is physiologically inert and insoluble in water, with a relative specific gravity of 1.045-1.065g/cm3, a viscosity of 100,000-300,000 centipa, and a volatile content of ≤ 1.5%. It has excellent thixotropic and isolation properties. See the product test report for other properties.

HEPES Buffer 4-Hydroxyethyl Piperazine Ethanesulfonic Acid

HEPES Buffer 4-Hydroxyethyl Piperazine Ethanesulfonic Acid

MOPSO Buffer 3- (N-Morpholino) -2-Hydroxypropanesulfonic Acid

(Name)3-(N-Morpholino)-2-Hydroxypropanesulfonic Acid (Chinese Name)3-(N-)-2- (Abbreviation)MOPSO (CAS#)68399-77-9 (Molecular weight)225.263 (Molecular formula)C7H15NO5S (Storage Conditions)Room temperature, light-proof and moisture-proof (Molecular structure)

PIPES Buffer Piperazine-N, N '- Bis (2-ethylsulfonic acid)

piperazine-N, N '- bis (2-ethylsulfonic acid)       PIPES Content: (English name)PIPES (Chinese name)Piperazine-N, N '- bis (2-ethylsulfonic acid) / piperazine-1,4-diethylsulfonic acid(CAS#)5625-37-6 (Molecular weight)302.368 (Molecular formula)C8H18N2O6S2 (Storage condition)room temperature, away from light and moisture (Molecular structure)

TAPS Bio-Buffer 3-[Tris (hydroxymethyl) Methylamino]-1-Propanesulfonic Acid

(Name)3-[Tris(hydroxymethyl)methylamino]-1-propanesulfonic acid (Chinese Name)N-()-3- (Abbreviation)TAPS (CAS#)29915-38-6 (Molecular weight)243.28 (Molecular formula)C7H17NO6S (Storage Conditions)Room temperature, light-proof and moisture-proof

Bicine N, N-Bis (2-hydroxyethyl) Glycine

Bicine buffer N, N-Bis (2-hydroxyethyl) Glycine cas150-25-4

MOPS Bio-Buffer 3-Morpholinopropanesulfonic Acid CAS1132-61-2

MOPS pH Buffer 3-Morpholinopropanesulfonic Acid CAS1132-61-2

TOOS EHSPT Chromogenic Substrate Ivd Reagent CAS82692- 93-1

TOOS EHSPT Chromogenic Substrate Ivd Reagent CAS82692- 93-1

Showing 1 to 1 of 1 (1 Pages)