All products

Tenlog Multi Nozzle 3D Printer Motherboard with DMP 3D Printing System Support Multi Nozzle Printing

We have developed the DMP 3D printing system ourselves, and DMP stands for Dual Material Printing or Duplication & Mirror Printing. It can move 7-axis at the same time and has the firmware collision avoidance function of running two nozzles efficiently. Our self-developed TENLOG® Multi Nozzle 3D Printer Motherboard has a 7-axis motion control system. The Tenlog motherboard can work for 500 hours without interruption. The motherboard firmware is based on marlin 1.0.x and is open source. You can buy it to make a spare part for Tenlog Dual Extruder 3D Printer.

RP76II 76mm Impact Receipt Printer

1. 4.4 lines/s high printing speed, support various language 2. Exquisite design, easy to use 3. Multiple interfaces optional, USB+Serial, USB+Parallel, USB+Serial+Ethernet 4. Support black mark printing, compatible with ESC/POS 5. Cutter optional, support double color printing

58mm micro panel thermal receipt printer CSN-A1

Compatible with APS ELM205CH (RS232,TTL)/USB

RP76III 76mm Impact Receipt Printer

1. High printing speed, low noise 2. Reliable and good printing quality 3. Easy paper loading 4. Support double color printing 5. Has paper end detecting function 6. High performance cutter optional

58mm micro panel thermal receipt printer CSN-A1K

Compatible with APS ELM203-LV/HS (RS232,TTL)/USB

ACE H1 80mm Thermal Receipt Printer

1. Compact design, fashionable appearance 2. Support paper margin and line spacing adjustment 3. 250mm/s high printing speed 4. Support voice alarm and NFC function 5. Switching compatibility for paper out front and paper out upward

0.2mm Right Tenlog Dual Extruder 3D Printer Nozzle Kits P2

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.2mm

ACE V1 80mm Thermal Receipt Printer

1. Big gear, long life, durable performance 2. Wall hanging, order come flashing, paper end, voice reminding , NFC function 3. Fashionable appearance, easy operating 4. Support successive paper, label paper and without bottom paper printing 5. 350mm/s high speed printing

Tenlog 3D Printer Double Head Extruder & Nozzle Kits with Extrusion Motor Support Rapid Disassembly to Replace Nozzle Kits

Tenlog 3D Printer Double Head EXtruder & Nozzle Kits, also called Tenlog Quick Disassembly Replacement Nozzle Kits. Each kits requires only 4 screws to replace the entire nozzle and extruder kits.

RP332 80mm Thermal Receipt Printer

1. Fashion appearance, easy to use 2. 80mm large paper warehouse, compatible with 58mm rolls 3. 250mm/s high printing speed 4. Support flat and wall hanging

Tenlog 3D Printer Photoelectric Sensors Positioning Accuracy up to 0.025mm

All Tenlog Double Extrusion 3D Printers use high precision 3D printer sensors, the Photoelectric Sensors.

RP850 80mm Thermal Receipt Printer

1. Simple and elegant, with high optical mirror and sticks appearance 2. Internal important parts are with metal material 3. Easy paper loading, with auto cutter, full cut/partial cut optional 4. 300mm/s high printing speed, rapidly change supplies, improve work efficiency 5. With auto cutter, paper out alarm 6. Parallel, serial, USB, Ethernet Optional multiple interfaces (supports two in one, or three in one) 7. Paper end sensor, paper near end sensor (for flat)

Tenlog Dual Extruder 3D Printer Mechanical Micro Switch(Limit Switch)

This is Y-axis Stoper, Y-axis just go to zero at the begin of the printing.

RP820 80mm Thermal Receipt Printer

1. Elegant and functional design ★ Black/luxury gold color optional ★ Color light order alarm(optional), Beeper order alarm, paper end&paper near end detection ★ Flexible installation on countertop or wall using optional bracket ★ Support Wifi 2. Efficient and stable printing ★ 300mm/s high speed printing, easy to maintain, improve working effciency ★ Drop-in paper loading, with auto cutter, partial/full cut optional 3. Huge Compatibility ★ Parallel,Serial,USB, and Ethernet interfaces optional(support two in one, or three in one) ★ Suitable for kitchen, reception and other appliances

Tenlog 3D Printer Ball Slide for Dual Extruder 3D Printer

The ball slides slide smoothly and have a long service life and easy maintenance. Only regular grease or lubricant is required.

RP328 Thermal Receipt Printer

1. Compatible for 80mm and 58mm thermal paper roll 2. Wall mount function 3. Large storage (paper mode) and paper near end optional 4. High printing speed 250mm/s 5. Mainly adopt R angle and waist shape design; delicate and compact appearance

0.2mm Left Tenlog Dual Extruder 3D Printer Nozzle Kits P1

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.2mm

CSN-A5L 2 inch micro panel mount thermal receipt printer

Serial(RS232,TTL)/USB/Parallel; DC5-9V/12V; Front fixing

RP327 80mm Thermal Receipt Printer

1. High printing speed 250mm/s, low noise 2. Optional auto cutter(partial/full) 3. Desktop or wall-hanging 4. Interfaces:USB, serial, parallel, ethernet 5. Suitable for kitchen, reception and many other applications

Tenlog 3D Printer Nozzles 0.2mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm

Here you can find 3D printer nozzles of all types and sizes. When you place an order, buy more nozzles, no longer worry about nozzle clogging, no need to spend time cleaning the nozzle.

Tenlog 3D Printer Hot Bed 24V MAX Temperature 80℃

Its working voltage is 24V and the maximum temperature is 80 degrees.

RP326 80mm Thermal Receipt Printer

1. High printing speed 250mm/s, low noise 2. Optional auto cutter 3. Desktop or wall-hanging 4. Interfaces:USB, serial, parallel, ethernet 5. Suitable for kitchen, reception and many other applications

Tenlog Dual Extruder 3D Printer Cooling Fan Used for Cool Printed Object Dissipate Heat and Motherboard

The normal fan on the left is used to cool the heat sink in the nozzle kit. The turbofan on the right provides more airflow for cooling printed objects and reducing the cooling time of the filaments.

RP330 80mm Thermal Receipt Printer

1. Fashion appearance, easy to use 2. High printing speed 250mm/s, low noise 3. Optional auto cutter(partial/full) 4. Desktop or wall-hanging

MW Power for Tenlog Dual Extruder 3D Printer Peak Power 350W

Input Voltage Range 110-120V ~/6.8A 200-240V ~/3.4A 50/60Hz Output 24V ⎓ 14.6A

RP331 80mm Thermal Receipt Printer

1. Fashion appearance, easy to use 2. High printing speed 250mm/s, low noise 3. Optional auto cutter(partial/full) 4. Desktop or wall-hanging

Showing 1 to 6 of 6 (1 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.