All products

Powder Coated Automatic Self-climbing Scaffolding System

Shuangma Self Climbing Scaffolding Systems is suitable for high-rise buildings and super high-rise shear wall structures. This system integrated with the climbing mechanism makes for one-time installation and lifting. Also its built-in safety screen design can effectively prevent workers and objects falling when operating.

Climbing Scaffolding

Climbing Scaffold, a platform used for tall-building safety protection during construction, by attaching to the facade, climbing by its own lifting system, is an automatic lifting construction platform with anti-overturning and anti-falling functions.

Ring Lock Scaffolding Standard / Vertical (Short Spigot)

Ringlock Scaffolding,also called Allround scaffolding, is one of the most popular system scaffolding or modular scaffolding for construction. It is widely used in the construction industry, such as building, bridge, viaduct, petrochemical, shipyard, aircraft maintenance, etc. It supports to access work and platform as a temporary structure in building construction, or temporary stage platform / grandstand for events, and also plays a heavy load duty in many kinds of project. Scaffolding Components: Standard, Ledger, Level Braces, Diagonal Brace, Side Bracket, Plank, Stair.

Hydraulic Climbing Scaffolding System

Hydraulic Climbing Scaffold System is composed of formwork system, frame and operating platform system, hydraulic climbing system and electrical control system. It is suitable for automatic formwork construction equipment of cast-in-place reinforced concrete structure construction, mainly used for cast-in-place concrete structure construction such as shear wall system, cylinder system, pier and other high-rise structures.

Ring Lock Scaffolding Ledger / Horizontal

Ringlock Scaffolding,also called Allround scaffolding, is one of the most popular system scaffolding or modular scaffolding for construction. It is widely used in the construction industry, such as building, bridge, viaduct, petrochemical, shipyard, aircraft maintenance, etc. It supports to access work and platform as a temporary structure in building construction, or temporary stage platform / grandstand for events, and also plays a heavy load duty in many kinds of project. Scaffolding Components: Standard, Ledger, Level Brace, Diagonal Brace, Side Bracket, Plank, Stair.

Ring Lock System Scaffolding Diagonal Brace / Bay Brace

Scaffolding brace or diagonal gives additional strength to the structure and keep it stable. These are available in modular lengths to meet specific scaffold project requirements. Tube diameter 48.3 mm with 2.5 mm thickness is used with steel casted ends which can be easily assembled with hammering.

Ring Lock System Scaffolding Level Brace, Plain Brace, Diagonal Ledger

Level Brace, also called Plain Brace, is main component of system scaffolding which use as diagonal ledger. It is used in the large bay mobile scaffolding tower and gives additional strength to the tower structure and keep the tower stable.

Ring Lock Scaffolding Side Bracket, Board Bracket, Consloe Bracket

Ring Lock Scaffolding Side bracket is used at the edge of a scaffolding to extend the reach or extension off of any side of the scaffolding where sunshade comes.

Hot Dip Galvanized Ring Lock Scaffolding Girder Beam

Ring Lock Scaffolding Lattice Beams are the horizontal members that allow for scaffolding over large spans or gaps, offers suspended, walk through and beam support in Construction. Sizes of the Lattice Beams are in 10 ft to 28 ft according to construction design and 500mm depth.

Hot Dip Galvanized Ring Lock Scaffolding Bridge Ledger

Ring Lock Scaffolding Bridge Ledgers provide horizontal extra load support for planks.

Hot Dip Galvanized Ring Lock Scaffolding double Ledger

Ring Lock Scafolding Double ledgers are horizontal members ing that allow for increased load carrying capacities not possible with single tube or regular duty ledgers. They provide increased horizontal support for loads and planks.

D60 Ring Lock Shoring Scaffolding Standard / Vertical

D60 Ring Lock High Load Shoring Scaffolding: It is used in Heavy Duty Load Requirement Construction Support, Including Infrastructure Scaffolding Like Bridge, High Speedway Construction, Industrial Scaffolding like Offshore Construction and High Load Concrete Formwork Temporary Scaffolding. The Vertical is made by O.D60x3.5mm high grade steel tube for heavy duty shoring purpose. Scaffolding Components: Standard, Ledger, Diagonal Brace.

D60 Ring Lock Shoring Scaffolding Ledger / Horizontal

D60 Ring Lock High Load Shoring Scaffolding: It is used in Heavy Duty Load Requirement Construction Support, Including Infrastructure Scaffolding Like Bridge, High Speedway Construction, Industrial Scaffolding like Offshore Construction and High Load Concrete Formwork Temporary Scaffolding. The Vertical is made by O.D60x3.5mm high grade steel tube for heavy duty shoring purpose. Scaffolding Components: Standard, Ledger, Diagonal Brace.

D60 Ring Lock Shoring Scaffolding Diagonal Braces

D60 Ring Lock High Load Shoring Scaffolding: It is used in Heavy Duty Load Requirement Construction Support, Including Infrastructure Scaffolding Like Bridge, High Speedway Construction, Industrial Scaffolding like Offshore Construction and High Load Concrete Formwork Temporary Scaffolding. The Vertical is made by O.D60x3.5mm high grade steel tube for heavy duty shoring purpose. Scaffolding Components: Standard, Ledger, Diagonal Brace.

AS/NZS 1576 Kwikstage Scaffolding Standard

Australian Kwikstage System Scaffolding vertical post is made by O.D. 48.3mm x 4mm thickness high quality steel tubing which can provides safety and heavy duty support for scaffolding, and complies to AS/NZS 1576 requirements. Kwikstage Scaffolding Main Componenets: Standard (Vertical), Ledger (Horizontal), Diagonal Brace (Bay Brace), Transom, Ladder Access Transom, Return Transom, Plank, Toe Board, Stairway, Brick Guard (Mesh Panel), Gate Standard, Trim Standard, Hop Up Bracket, Hop Down Bracket, Tie Bar, Base Jack, U-head Jack, and so on.

Australian / NZ Kwikstage System Scaffolding Ledger

Kwikstage System Scaffolding Ledger is part of scaffolding component used as scaffold runner or transom. It is usually fabricated by O.D 48.3x3.25mm steel tubes and comply with the Standard requiremwnts of AS/NZS 1576 for Australian / New Zealand's market. Kwikstage Scaffolding Main Componenets: Standard, Ledger, Diagonal Brace (Bay Brace), Transom, Ladder Access Transom, Return Transom, Plank, Toe Board, Stairway, Brick Guard (Mesh Panel), Gate Standard, Trim Standard, Hop Up Bracket, Hop Down Bracket, Tie Bar, Base Jack, U-head Jack, and so on.

Kwikstage Scaffolding Diagonal Brace / Bay Brace

Kwikstage System Scaffolding Diagonal Brace, also called bay brace, is a main scaffolding component that gives additional strength to the structure and keep it stable. The brace is made by O.D48.3x2.3mm tube and bolt-jointed the C pressing adaptors with wedge pins at brace ends. It meets the Standard requirements of AS/NZS 1576. Kwikstage Scaffolding Main Componenets: Vertical (Standard), Horizontal (Ledger), Diagonal Brace (Bay Brace), Transom, Ladder Access Transom, Return Transom, Plank, Toe Board, Stairway, Brick Guard (Mesh Panel), Gate Standard, Trim Standard, Hop Up Bracket, Hop Down Bracket, Tie Bar, Base Jack, U-head Jack, and so on.

AS/NZS 1576 Kwikstage System Scaffolding Transom

Kwikstage System Scaffolding Transom is the component of that for holding the platforms or planks without hooks, it is made by the 50x5mm angle steel and welded two ledger adaptors at two ends. Kwikstage Scaffolding Main Componenets: Vertical (Standard), Horizontal (Ledger), Diagonal Brace (Bay Brace), Transom, Ladder Access Transom, Return Transom, Plank, Toe Board, Stairway, Brick Guard (Mesh Panel), Gate Standard, Trim Standard, Hop Up Bracket, Hop Down Bracket, Tie Bar, Base Jack, U-head Jack, and so on.

Hot Dip Galvanized Speedshore Kwikstage Scaffolding Vertical Post

Speed Shore Kwikstage scaffolding is the type of heavy duty kwiskstage system scaffold that used for concrete slab formwork solutions with sleeved standard, C-ledgers, trigger brace, solid adjustable screw jack base , forkhead jacks, rail post etc.

Kwikstage System Scaffolding Return Transom

Kwikstage Scaffolding Return transom allows a 90 degree turn in the scaffold and sit over the ledger allowing boards to run at right angles in adjacent bays. It can also be used to change direction. The use of Return Transoms eliminates the " gap " between runs at right angles.

Kwikstage Scaffolding Ladder Access Transom

Kwikstage Ladder Access Transom is used where a ladder access or trapdoor is required inside a bay. The Ladder Access Transom is located between the two ledgers, this is placed approx 64" from the previous transom. To be used with a Safety Trap-Door, a single section verticle ladder is held in place with 4 nos Metal Ladder Clamp. We recommend that you used 2 nos 64" steel planks, the remaining space is filled with 3 nos steel planks.

Kwikstage System Scaffolding Mesh Panel, Brick Guard

Kwikstage Mesh Panel / Brick Guard is placed between the ledger and the steel plank. Designed to be suspended from a guard rail ledger enclosing the space between the ledger and the working platform for safety.

Kwikstage Scaffolding Hop Up Bracket

Kwikstage Scaffolding Hop Up Brackets are used to give an extra work platform for scaffolding. Normally located on the inside face of the scaffold, these are 1, 2 and 3 board sizes.

Kwikstage Scaffolding System Hop Up Bracket with Post and Spigot

Kwikstage Scaffolding Hop Up Brackets are used to give an extra work platform for scaffolding. Normally located on the inside face of the scaffold, these are 1, 2 and 3 board sizes. Hop Up Bracket with Post and Spigot allows to install scaffold vertical and ledger for safety railing.

Kwikstage Scaffolding Hop Down Bracket, Step Down Bracket

Kwikstage Scaffolding Hop Down Bracket / Step Down Bracket gives balance and stability to the bottom step when getting on or off stair access at ground level. The first step onto stair access can be difficult due to site constraints, ground levels and base outs. The use of the step down bracket gives the comfort of adjustment to balance the variables, so the step becomes easier when getting on or off the stair access at ground level.

Kwikstage Scaffolding Tie Bar

Kwikstage Scaffolding Tie Bars have pins at each ends which fit in holes of 2 and 3 Hop Up Brackets to prevent the brackets spreading and the planks from becoming dislodged.

Kwikstage scaffolding Corner Board

Kwikstage Internal Corner Board is used to fill in the gap ineternal corners when stage board brackets are used. It is a safe element to fill space between boards and standards to form a safe work platform and leveling. The internal corner boards sizes include one boards, 2 boards, 3 boards according to the width.

AS/NZS 1576 Kwikstage Scaffolding Toe Board with Bolt Lock

Kwikstage Scaffolding Toe Board / Kick Board is the component that prevents the building materials or tools falling off from working platform. The toe board has bolts at the ends to hold itself sitting between two verticals post of the platform.

Australian Kwikstage Scaffolding Toe Board Clip, End Toe Board Clamp

Toe Board Clip is used to hold the toe baord to the scaffold working platform. The traditional Kwikstage Scafolding toe board clamp is fabricated by 5mm steel plate. And mostly the steel plank is always used the toe board.

South Africa Kwikstage Scaffolding Standard

South Africa Kwikstage Scaffolding is a kind of popular modular scaffolding in SA. The Standards is made from O.D48.3mm x 3.25mm Scaffold Tube with V-lugs. It is Vertical Parts of Kwikstage Modular System. Kwikstage Scaffolding is commonly used for Concrete Formwork Slab Support, also used in Construction and Building. The main components of SA Kwikstage Scaffolding include: Standard, Ledger, Diagonal Brace, Hook-on Plank, Toe Board, Stair or Ladder, Cantilever Bracket, Strip Beam, decking Panel, and so on.

South Africa Type Kwikstage Scaffolding Ledger

South Africa Kwikstage Scaffolding is a kind of popular modular scaffolding in SA. The Ledger is made from O.D48.3mm x 2.5mm Scaffold Tube with C-pressing ends and wedge pins. The main components of SA Kwikstage Scaffolding include: Standard, Ledger, Diagonal Brace, Hook-on Plank, Toe Board, Stair or Ladder, Cantilever Bracket, Strip Beam, decking Panel, and so on.

Cup Lock Scaffolding Standard / Vertical

Cup Lock Scaffolding Vertical and Horizontal members are fabricated by ø48.3x3.25mm (1.90" O.D x 10 gauge) high strength steel tubes. It is a fully Hot Dip Galvanized multi-purpose steel scaffold system suitable for providing general access and supporting vertical loads. The key feature is its bowl locking point which allows up to 4 horizontals to be connected to a vertical in a single fastening action-making it probably the fastest and safest system available. Cup Lock Scaffolding Components: Standard, Ledger, Diagonal Brace, Side Bracket, Plank, Toe Board, Stair.

Hot Dip Galvanized Cup Lock Scaffolding Ledger

Cup Lock Scaffolding is fabricated by ø48.3x3.25mm (1.90" O.D x 10 gauge) high strength steel tubes. It is a fully Hot Dip Galvanized multi-purpose steel scaffold system suitable for providing general access and supporting vertical loads. The key feature is its bowl locking point which allows up to 4 horizontals to be connected to a vertical in a single fastening action-making it probably the fastest and safest system available. Cup Lock Scaffolding Components: Standard, Ledger, Diagonal Brace, Side Bracket, Plank, Toe Board, Stair.

Cross Lock Scaffolding Standard / Vertical

Cross Lock Scaffolding is a kind of new modular scaffolding system which in simple structure and fabricated with few accessories, it can provide easy erection and dismantling, and speeded and high efficiency performance, and it is use for residential, commercial construction. Scaffolding Components: Standard (Vertical), Ledger (Horizontal).

Cross Lock Scaffolding Ledger / Horizontal

Cross Lock Scaffolding is a kind of new modular scaffolding system which in simple structure and fabricated with few accessories, it can provide easy erection and dismantling, and speeded and high efficiency performance, and it is use for residential, commercial construction. Scaffolding Components: Standard, Ledger.

Showing 1 to 3 of 3 (1 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.