Allen Bradley 1756-RM2 !!! --- sales3@amikon.cn
Contact: Jessica
Email: sales3@amikon.cn
Skype: jessica01235483
Wechat: hu18030235311
Mobile: 86-18030235311(WhatsApp)
The Allen-Bradley 1756-RM2 is a ControlLogix Redundancy Module. It requires a redundant system for a backup in case of main system failure. It has enhanced features with speeds of up to 1000 Mbps. When paired with 1756-L7x controllers in both chassis, it gives the best scan performance. For cross loading, the 1756-RM2 uses redundant fiber ports with no single point of failure. During channel switchover, the processing chassis remains synched while the scan time may encounter a delay of around 10 ms. It has enhanced safety features with interference-free diagnostics.
The 1756-RM2 redundancy module draws 1.16 A current at 5.1V DC and 3.4 mA at 24V DC. It has a maximum power dissipation of 6W and a thermal dissipation of 21 BTU/hr. It can be installed in any slot in a ControlLogix chassis. The 1756-RM2 weighs 0.64 lbs. and it has an open enclosure. For communication, it supports up to seven enhanced ControlNet and EtherNet/IP communication modules. For wiring, the 1756-RM2 supports 1756-RMC1, 1756-RMC3 and 1756-RMC10 cable with 1m, 3m and 10m lengths respectively.
The ControlLogix 5560 and ControlLogix 5570 series of controllers support the 1756-RM2 module. The redundant system must have following components: two 1756 chassis with the same number of slots, modules, and firmware versions, and two additional ControlNet nodes. The Redundancy Module Configuration tool, RSLinx 2.59.01 communication software, and RSLogix 5000 20.01.00 programming software are required to run the 1756-RM2.
|
Attribute
|
|
1756-RM2
|
|
|
|
|
|
Current draw @ 5.1V DC
|
|
1.16A
|
|
|
|
|
|
Current draw @ 24V DC
|
|
3.4 mA
|
|
|
|
|
|
Power dissipation
|
|
6 W, max
|
|
|
|
|
|
Thermal dissipation
|
|
21 BTU/hr
|
|
|
|
|
|
Connector cables
|
|
1756-RMC1, 1 m (3.28 ft)
|
|
|
|
1756-RMC3, 3 m (9.84 ft)
|
|
|
|
1756-RMC10, 10 m (32.81 ft)
|
|
|
|
|
|
Slot width
|
|
1 slot
|
|
|
|
|
|
Module location
|
|
Chassis-based, any slot
|
|
|
|
|
|
Mounting
|
|
ControlLogix-XT chassis, single-slot module
|
Allen Bradley 1756-RM2
1756-RM2 - In Stock | Allen Bradley PLC ControlLogix
Email:sales3@amikon.cn
Part Number:
|
1756-RM2
|
|
Series:
|
ControlLogix
|
|
Module Type:
|
Enhanced Redundancy Module
|
|
Length:
|
10 kilometers
|
|
Operating Temperature:
|
32-140 Fahrenheit (0-60 Celsius)
|
HOT SALE --- please contact us !!!
|
1756-A4
|
ControlLogix 4 Slots Chassis
|
|
1756-A7
|
ControlLogix 7 Slots Chassis
|
|
1756-A10
|
ControlLogix 10 Slots Chassis
|
|
1756-A13
|
ControlLogix 13 Slots Chassis
|
|
1756-A17
|
ControlLogix 17 Slots Chassis
|
|
1756-A7XT
|
ControlLogix 7 Slots XT Chassis
|
|
1756-A4K
|
ControlLogix 4 Slots Chassis
|
|
1756-A7K
|
ControlLogix 7 Slots Chassis
|
|
1756-A10K
|
ControlLogix 10 Slots Chassis
|
|
1756-A13K
|
ControlLogix 13 Slots Chassis
|
|
1756-A17K
|
ControlLogix 17 Slots Chassis
|
|
194E-FA32E-P22-P22
|
194E Load switch
|
|
440E-L13131-4P
|
CABLE PULL SWITCH DM
|
|
42CA-U2MNA-D4
|
Photoelectric Sensor
|
|
194E-CA40
|
194E Load switch
|
|
42CA-U2MPA-D4
|
42CA Cylindrical Photoelectric Sensor
|
|
42CA-U2MNB-A2
|
Photoelectric Sensor
|
|
42CA-U2MPB-A2
|
Photoelectric Sensor
|
|
42CA-U2MNB-D4
|
Photoelectric Sensor
|
|
42CA-U2MPB-D4
|
42CA Cylindrical Photoelectric Sensor
|
|
140G-J3H3-D15
|
140G 250A J Frame Molded Case Ckt-
|
Email:sales3@amikon.cn
if you have a large purchase, we can make a discount.
specifications:
new+original +one year warranty
