Aluminium Honeycomb Non-cold Bridge Cleanroom Partition Wall Panel

The Non-cold bridge partition wall system solves the condensation condensation phenomenon and improves the overall insulation performance of the clean room, prolongs the service life of the plate and reduces the cost of replacing the plate.



  • Frame Thickness1.0mm pvc 2.0mm
  • ApplicationLow Temperature and high humidity Clean Room
  • Core MaterialPU,Plaster,Rock Wool,Magnesium Board,Paper Honey Comb,Aluminium Honey Comb,EPS,etc.
  • Max Length3000mm
  • Steel Facer Thickness0.4-0.8mm
  • CoatingPE,PVDF,HDP
  • Outer Plate MaterialPPGI,Al-mg-Mn Alloy steel,SS steel,Ti-Zn steel,HPL,VCM
  • Wall Thickness50mm
  • Width980mm,1180mm

1、The cleanroom wall system is a composite board made of colored coated steel sheets according to different core materials. The four sides of the board are reinforced and sealed by edge sealing. The production workshop is closed by using the purification board, and other systems can be used to ensure a certain cleanliness. Degree of space to meet the processing quality of different industries such as food, medicine, electronics and other products.

2、The four sides of the purification board are made up of steel keels and corners. In the low temperature clean processing workshop or the cold season, condensation and condensation are likely to occur at the edge sealing. To this end, Wiskind’s broken bridge keel partition wall system  and insulated keel partition wall system provide perfection for this problem. The solution improves the overall insulation performance of the clean room, prolongs the service life of the plate and reduces the cost of replacing the plate.


Advantage:

1、The broken bridge partition wall system are connected by high-strength ABS corners, so that the overall structural strength of the frame is not affected, and in some low-temperature clean spaces, there is no condensation water around the border.

2、Improve the overall insulation performance of the clean room, prolong the service life of the plate and reduce the cost of replacing the plate.

3、This product is suitable for clean workshops in low temperature and high humidity environment.

 

NCB Wall System For Clean Room

 





INQUIRY

Contact us for all information about the product