GL6-CE Auto Spray Booth/Paint Room for Car Body Repair
Products features:
Main body & basement:
Wall panel: sandwich style, δ=50mm, rock wool. (Polystyrene is optional)
Basement: steel structure, full grids，ramp: 2 pcs of grids.
Door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock.
Fans & ducts:
One 11kw intake fan and one 11kw exhaust fan.
4m straight exhaust ducts, one 90° bend, and one 60° bend.5m straight chimney and 2 small bends.
Electrical VCD. one pressure meter.
Spraying/baking transition damper, automatically air controlled.
Fire protection equipment: 1 set, the inductor control closed; energy-saving equipemnt:1 set.
Burner & filter:
Heat exchanger: stainless steel. Riello/ RG5S burner.
Roof filter: 6 pcs of filter, mounted above support frame, which is made of steel and powder coated.
5 pcs of floor filter and 2 pcs of air mouth filter.
LED light ＆ Control box:
Upper light: 10 sets, 4*18w per set. side lights: 8sets, 4*18w. LED LIGHT
Control box: imported components, overload, overheat, phase-lacking, phase-locking protection,
engine Y/△ start.
Automatically stop when preset time is up.
Constant temperature spraying.
|
Technical Specifications
|
GL6-CE
|
|
External size(m)(LxWxH)
|
7.0×5.6×3.5
|
|
Internal size(m)(LxWxH)
|
6.9×3.9×2.7
|
|
Door width(m)
|
3.0
|
|
Door height(m)
|
2.66
|
|
Air flow (m3/h)
|
30000
|
|
Inside no-load air speed(m/s)
|
0.3-0.5
|
|
Power (kw)
|
25
|
|
Vehicle suited
|
Saloon car
|
|
Water based device
|
As optional
|
Environmental protection Device
|
As optional
|
GL6-CE Spray Booth Show
