4022 262 33242 X-RAY Product Overview:
- Your fluoroscopy room has two TV monitors.At the rear of each monitor is a 75-ohm switch.You find that if this is turned on, the picture contrast and brightness is reduced.
a) With a two monitor system, both switches should be turned ‘on’.
b) The monitor connected between the camera and the end monitor should be turned ‘off’, and the end monitor turned ‘on’.
c) With a two monitor system, both switches should be turned ‘off’.
2. Exposures using an automatic exposure control (AEC) have increased in density.As a first response, you should:
a) Try exposing at lower kV settings.
b) Have the AEC recalibrated.
c) Check the processor performance.
