Description:
|
Model
|
SMT250-T2
|
|
Input Voltage
|
220V/240V
|
|
Frequency
|
50/60Hz
|
|
Working temp.
|
-25-40℃
|
|
Load
|
12W-250W
|
|
Size
|
86*86*38mm(L*W*H)
|
|
Weight
|
170G
|
Feture:
1) Only connect L(LIVE).
2) Dimming operation:Touch pannel with one touch botton.
3) Phase-cut model: trailing edge dimming.
4) Memory function: remember the last brightness when turn on
dimmer again.
5) Over current protection.
Part of device
Wiring diagram
Operation:
When dimmer under turn off status,Press the Touch key ( ) to turn on the dimmer,and dimmer recover the status(dimming level )
same as last time before it turning off.
When dimmer under turn on status, press the Left ( ) Key the brightness down; press the Right ( ) Key,the brightness up; press
on the ON/OFF ( ) Key ,dimmer shut down.
Working principle:
1. Working pinciple :Sine wave phase-cut.
2. Control the driver to soft start to achieve continuous,soft dimming.
3. Over-current protection,pretend the driver and dimmer from the damage caused by huge current.
4. A load fine to set the minimum brightness to prevent the flicker caused by the influence when it is starting.
Instruction mannal
