General Electric  IS200TBTCH1C  !!!  ---mail to: sales3@amikon.cn  

  Email:     sales3@amikon.cn       

                                                                     Contact:  Jessica                   |   Skype:     jessica01235483

                                                                     Wechat:   hu18030235311   |  Mobile:   86-18030235311(WhatsApp)

Outputs are scanned immediately following logic solution. During the output scan, the CPU sends output data to the Genius Bus Controllers, FIP Bus Controllers, and Series 90-70 output modules. Also, the PLC, as the producer in an Ethernet Global Data exchange will periodically produce new samples of data for use by the configured devices on the Ethernet network. (For details, see GFK1541, the TCP/IP Ethernet Communications for the Series 90 PLC User’s Manual). 

Series 90-70 output modules are scanned from lowest to highest I/O reference address. Bus Controllers are scanned from rack 0 to rack 7 and lowest to highest slot number within each rack.

General Electric  IS200TBTCH1C

GE  IS200TBTCH1C  | General Electric | Board Module

         sales3@amikon.cn  

Polling for faulted boards also occurs during the output scan phase of the sweep. Faulted board polling recognizes replacement boards for faulted ones and reconfigures them into the system. 

Emal:sales3@amikon.cn                                                                                         

if you have a large purchase, we can make a discount.
specifications:

new+original +one year warranty