General Electric   IS215UCVGH1A  !!!  ---mail to: sales3@amikon.cn  

  Email:     sales3@amikon.cn       

                                                                     Contact:  Jessica                   |   Skype:     jessica01235483

                                                                     Wechat:   hu18030235311   |  Mobile:   86-18030235311(WhatsApp)

The next phase of system power-up is the validation of the PLC memory within the CPU. First, the system verifies that the battery is not low and that battery-backed RAM areas are still valid. A known area of battery-backed application RAM is checked to determine if data was preserved. Next, if a ladder diagram program exists, then a checksum is calculated across the _MAIN ladder block. If no ladder diagram program exists, then a checksum is calculated across the smallest standalone C program.

General Electric   IS215UCVGH1A

GE  IS215UCVGH1A | General Electric | Input Terminal Card

         sales3@amikon.cn  

After completing its own self-test, the CPU performs the system configuration. It first clears all of the system diagnostic bits in the BCP (Boolean Coprocessor) Bit Cache memory. This prevents faults that were present before power-down, but are no longer present, from accidentally remaining as faulted

Emal:sales3@amikon.cn                                                                                         

Are you looking for a suitable sustainable partner to ensure your industrial electronics run smoothly or in the event of a failure？
If so, then Moore Automation is your best choice.