Indoor drone for pipe and tunnel inspection

This UAV only needs to be observed and remotely controlled by a pilot on the ground, avoiding the risk of manual inspection and improving the safety of the operation. Meanwhile, based on Li DAR technology, it can smoothly fly autonomously in indoor and underground environments without GNSS data information, and can comprehensively scan the top, bottom and surface of indoor and tunnel areas without dead corners. Build HD model image data. In addition, the whole UAV is equipped with a cage anti-collision structure, which effectively guarantees the safety of the UAV during flight, and can be used in a variety of environments such as highway tunnels, tunnel passages, and indoor environments.



Product characteristics

Relying on the quad rotor platform, it has undergone various regional tests such as high temperature, low temperature and salt spray

Intelligent scenarios are widely used, and smooth flight under weak GNSS environment

 The whole machine collision avoidance, multi-sensor, high-definition shooting, real-time return image definition is not less than 1080p

Ground remote observation, operation safety and save inspection costs

 

Product parameter

 

TSU-1 indoor drone

Size

≤990mm(including four-way collision protection cover)

Material

Carbon fiber

Empty weight

≥4.9kg(including battery and protective cover)

Endurance time

≥20min

Maximum flying speed

3m/s

Maximum ascent speed

1m/s

Vision and distance sensors

≥1set

Fill lighting

support

Visible light pixel

≥8 million,Support 4K video recording

Modular load change function

support

Control radius

≥300m

Wind resistance class

5m/s

Operating temperature

0℃~50℃

Integrated dual remote control ground station parameters

Display screen

7

Size

308*148*72mm(no antenna)

Weight

1.44kg

Battery capacity

10200mAh

Endurance time

≤10h

Charging time

3.5h

Port

HDMI、USB -A、Type-C、LAN、SIM

Operating temperature

-10℃~50℃

Waterproof class

IP45

Parameters of 3D Li DAR imaging module

Size

65*65*60mm

Material

Aviation aluminum alloy

Weight

0.256kg

Laser wavelength

905nm

range

40m@10% reflectivity

FOV

Horizontal 360°,vertical -7°~52°

Frame rate

10 Hz

Operating temperature

-20℃ to 55℃

Supply voltage range

9~27   V DC

Number of shots

3

Imaging FOV

270°

Three-piece camera module parameters

Total pixel

78000000

Weight

≤0.3kg

Minimum exposure interval

0.7s

sensor

APS -C Sony CMOS sensor

The above parameters are for reference only, and the detailed product parameters are subject to actual delivery.

 

 


Product Tags Indoor inspection drone          Inspection Drone          tunnel inspection drone         

INQUIRY

Contact us for all information about the product


click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.