Medium voltage dynamic reactive power compensation device Statcom

Medium voltage dynamic reactive power compensation device SVG STATCOM is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.



OVERVIEW of HV SVG STATCOM

Medium voltage dynamic reactive power compensation device STATCOM using IGBT as the core power modules which can quickly and continuously provide capacitive or inductive reactive power, achieve constant reactive power, constant voltage and constant power factor control through the assessment point, and ensure the power grid is running stable, high efficiency and high quality. In the power distribution network, STATCOM can significantly improve the power quality (improve the power factor, overcome phase imbalance, eliminate voltage flicker and fluctuation, restraining harmonic), if it is installed in some special loads (such as electric arc furnace).

HV SVG STATCOM products use advanced instantaneous reactive power theory and power decoupling algorithm as the theory foundation, and adopt many technology such as modern power electronics, automation, micro-electronics and network communication. It can set reactive power nature and size, power factor and grid voltage as the control target, track power quality dynamically, adjust reactive power output, achieve setting curve and improve power quality.

HIGH VOLTAGE STATCOM
High voltage SVG
       Outoor container HV STATCOM  air cooiling                               Outdoor container HV STATCOM


Outdoor STATCOM Specification

Rated capacity ±1~±42Mvar
Rated work voltage 6kV~35kV
Rate frequency 50/60HZ
Over-load capacity More than 1.2 times overload
Response time ≤5ms
Active power loss ≤0.8%
Total harmonic distortion ≤3%
Control power 380VAC, 220VAC, or 220VDC
Reactive power regulation Compensate inductive and capacitive Vars continuously and smoothly.
The start regulated reactive power 5kvar
The resolution of compensate current 0.5A
Communication interface Ethernet, RS485, CAN, high-speed optical communication interface
Communication protocol MODBUS_RTU, ProfiBUS, CDT91, IEC61850-103/104, CANOPEN, User-defined,can be set on HMI.
Storage temperature -30℃~+70℃
Operating temperature -10℃~+40℃
Relative humidity month average value no more than 90% , no frost
Altitude <2000m(more than 2000m need to customize)
Seismic intensity 8 degree


STATCOM Main Features

HV SVG series product with high performance, high reliability is designed to meet users’ demands of improving power factor of power transmission, compensating harmonic and the negative sequence of current. It is easy to operate. Its features are as follows,

statcom power cell power cell of svg
          POWER CELL OF HV STATCOM                            POWER CELL OF HV STATCOM

■Better control for power grids, better load compensation, better power factor improvement

SVG/STATCOM increase system stability and power quality by providing voltage control and support, reactive power control, power oscillation damping, and increased power transfer capacity. STATCOM enables electro-intensive industrial processes to obtain a grid connection by controlling flicker level, harmonic voltage distortion, and voltage unbalance. STATCOM also allows renewables to be connected to the grid in compliance with grid code requirements by providing fault ride through support and voltage control.

Optimal stability and quality

SVG/STATCOM is geared to quickly inject significant inductive or capacitive power. Thus the STATCOM provides improved dynamic stability of transmission systems to reduce the risk of voltage collapse and blackout while avoiding deterioration of the power quality due to its multilevel configuration: generating unwanted harmonics is widely avoided.

■In harmony with harmonics – and best flicker reduction

Harmonics generation is low due to the use of MMC technology, resulting also in low noise emissions.

The extremely fast control of  SVG/STATCOM allows in industrial applications highly efficient flicker reduction and even active reduction of the lower harmonics caused by a nonlinear load such as an electric arc furnace.

■Fastest response – efficient solution

The standardized component design allows minimized engineering efforts and provides an overall fast, efficient, modular, and cost-effective solution.

ZDDQ SVG/STATCOM control with its most advanced concept offers unsurpassed speed in controlling the IGBT semiconductors to precisely generate the desired flow of energy between the converter and the feeding network

inside of outdoor statcom
container statcom

                                              Internal of HV SVG                                                                  Reactors in STATCOM                        


Outdoor 6KV STATCOM

Model

Rated voltage

 (kV)

Rated capacity

(Mvar)

Dimension Remark Weight
Width
Height Depth
 (mm) (mm) (mm)
HV SVG-C1.0/6-O     6 1 5200 2560 2438 Iron core Reactors 4450
HV SVG-C1.5/6-O 1.5
HV SVG-C2.0/6-O 2 4850
HV SVG-C3.0/6-O 3
HV SVG-C4.0/6-O 4 5450
HV SVG-C5.0/6-O 5
HV SVG-C6.0/6-O 6 5750
HV SVG-C7.0/6-O 7 6700 Hollow    Reactors 6450
HV SVG-C8.0/6-O 8 6600
HV SVG-C9.0/6-O 9 6700
HV SVG-C10.0/6-O 10 6800
HV SVG-C11.0/6-O 11 6900
HV SVG-C12.0/6-O 12 7000


Typical Application fileds of STATCOM

Electric Arc Furnaces – voltage stabilisation reduces tap-to-tap time and electrode consumption.

Rolling Mills – elimination of voltage and harmonic distortions reduces reactive power demand and increases electrical system capacity.

Mining and heavy industry – dynamic reactive power compensation stabilise the power system, especially on large motor start up, ensuring reliability of the power system.

Wind and solar farms – meeting strict grid connection criteria by providing dynamic voltage control and voltage stability at the common coupling point (PCC).

Renewables markets – including solar farms, wind farms, solar panel installations.










Product Tags lv mv hv switchgear          statcom          lv mv & hv voltage ranges          lv mv hv voltage ranges          statcom solutions          application of statcom          statcom wikipedia          advantages of statcom          siemens statcom         

INQUIRY

Contact us for all information about the product


click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.