Natural Agate Mortar and Pestle

D40-270mm,High Quality Lab Agate Mortar & Pestle,It is widely used in chemical experiment, medical research, geological analysis, metallurgy and other fields




Product Item: Natural Agate Mortar and Pestle


Application:

Agate mortar, agate mortar: mainly ground the solid or mix the solid evenly. It is suitable for grinding and analyzing experimental instruments for a small amount of samples inside the laboratory. Advanced grinding for pharmaceutical plants, high compressive strength, acid and alkali resistance. After the grinding, no chyle body material is mixed into the workpiece.It is widely used in chemical experiment, medical research, geological analysis, metallurgy and other fields



Feature:

1. The product is made of authentic natural agate stone as raw material.

2. Fine workmanship, beautiful appearance, no cracks, no impurities, strong resistance to wear.

3.The product gloss is high quality, strong corrosion resistance, can be used in acid abrasive materials.



Szie details :

Natural Agate mortar
Item NO. OD(mm) ID(mm) Depth(mm) Item NO. OD(mm) ID(mm) Depth(mm)
CS-MN-01 40 30 13 CS-MN-12 160 150 50
CS-MN-02 60 50 15 CS-MN-13 190 170 55
CS-MN-03 70 60 18 CS-MN-14 200 180 58
CS-MN-04 80 70 20 CS-MN-15 210 190 60
CS-MN-05 90 80 23 CS-MN-16 220 200 63
CS-MN-06 100 90 25 CS-MN-17 230 210 65
CS-MN-07 110 100 27 CS-MN-18 240 220 68
CS-MN-08 120 110 30 CS-MN-19 250 230 70
CS-MN-09 130 120 33 CS-MN-20 260 240 73
CS-MN-10 140 130 37 CS-MN-21 270 250 75
CS-MN-11 150 140 40

 Natural Agate Pestle
Item NO. Length mm Diameter mm
CS-MP-Φ4cm 40 18
CS-MP-Φ5cm 50 18
CS-MP-Φ6cm 60 19
CS-MP-Φ7cm 70 20
CS-MP-Φ8cm 80 22
CS-MP-Φ9cm 90 22
CS-MP-Φ10cm 100 24
CS-MP-Φ11cm 110 25
CS-MP-Φ12cm 120 27
CS-MP-Φ13cm 130 27
CS-MP-Φ14cm 140 27
CS-MP-Φ15cm 150 28
CS-MP-Φ16cm 160 30
CS-MP-Φ17cm 170 30
CS-MP-Φ18cm 180 32
CS-MP-Φ19cm 190 35
CS-MP-Φ20cm 200 38

Technical parameters:

Technical parameters of agate mortar:
Composition SiO2 MgO/CaO/Mn2O3
wt% 97.26 2.74


Notes for using agate mortar:

1. Do not make it contact with fluoric acid.

2. Do not heat it up or dry it in oven.

3. In case of large lump or crystalline sample, it should be cracked outside and then put into agate mortar for grinding.

4. Mortar should be washed with water after using. If necessary, it can be washed with diluted hydrochloric acid first and then with water. If it is still not clean,  add a little salt and grind it for some time, then pour it out and wash the mortar again. If necessary, sea sand can be used instead of salt to clean.

5. For objects with high hardness and coarse granularity, it would be better not to grind them in agate mortar to not scratch the surface.

6. When grind sample, the mortar should be placed on an object that is not easy to slide and the pestle should be kept vertical. Large pieces of solid can only be crushed, intead of mashing by pestle, otherwise the mortar, pestle will damage,or solid will splash out.  Explosive substances can only be crushed lightly without grinding.When grind substances those are corrosive to skin, thick paper or plastic sheets should be placed on the mortar, and perforate the central of the sheet, insert pestle into the hole and grind the sample. Mass of solid added into the mortar shall not exceed 1/3 of its volume.




Shipping : We do international shipping .



Related product recommendation:


High Alumina Mortar   Alumina Ceramic Mortar And Pestle

ceramic Mortar Porcelain Mortar And Pestle





Product Tags mortar and pestle or pestle and mortar          pestle and mortar or mortar and pestle          mortar pestle          pestle mortar          mortar or pestle          and pestle mortar          mortar and pestle          no mortar and pestle          mortar with pestle         

INQUIRY

Contact us for all information about the product


click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.