Popular Pure White Interior Wall Paneling Nano Glass Stone 003 Slab

Pure White Nano Glass 003 is of granite material feature and marble’s gloss. Non-radioactive and environmental friendly, it becomes a new and reusable decorative building material all over the world.

It is THE BEST NANO-CRYSTALLIZED GLASS PANEL FOR CUTTING AND PROCESSING.With the improvement of the production line, Nano Crystallized glass panel 003 come out with the excellent quality which can be cut and processed by Natural stone cutter or machines. Based on all the advantages of Nano-crystallized glass panel 002, Nano-Crystallized glass panel 003 has high reputation among the global market with the stone-like quality.

Advantages:

1. Compact structure: Molecular microcrystalline particle size of the super nanoglass reaches the nanometer level. Fibrous crystal molecular structure makes it excellent material for processing such as round cutting, drilling, carving, 45°cutting and other edge design processing to users’ requirement.
2. Easy-to-cut: Cutting can be done at the construction site by the bridge cutting machine and portable cutting machine.
3. High hardness: The hardness Mohs of the surface reaches at Level 7.
4. High compressive strength,high tensile strength. No white off, no deformation and no crack even it is exposed to the sunlight. The special feature makes it widely used in the floor laying.
5. Low expansion coefficient: Super nanoglass can bear the temperature range from -18°C to 1000°C with no influence on the structure, color and shape.
6. Corrosion resistance and acid & alkali resistance, and color will not fade off and strength stays same after a long period of time.
7. No water and dirt absorption. It is easy and convenient to be cleaned.
8. Non-radioactive, environmental friendly and reusable.

Test Report

SUITABLE FOR: KITCHEN COUNTERTOP, WALL CLADDING, FLOORING,                             BATHROOM VANITY-TOPS, TABLE TOPS, STAIR, ETC.

SLAB SIZE: 2400-3000mm x 1300-1400mm x 18mm

Regular TILE SIZES: 300*300*18mm, 600*600*18mm, 800*800*18mm, etc.

CUSTOMIZED SPECIFICATION ON REQUEST.

Packing & Shipping

1.      Packing: 
Countertops: Padded with foamed plastic and packed in fumigated wooden crates, reinforced with metal straps outside.
Tiles: Fumigation wooden crates, reinforced with metal straps outside.
Slabs: Fumigation wooden bundles.

2.       Delivery:  

About 15-20 days after receiving deposit..

3.      Loading:

Applications

NANO GLASS STONE 003 CONSTRUCTION GUIDANCE

★IMPORTANT:                                            

Crystallized Glass Stone is a latest building material and its application and construction method differ greatly from that of natural stone. Be careful.

1. Protection of surface protective film: The surface protective film pasted ex works can resist pollution and prevent scratching by sand grains. And it can be removed

    only after the completion of the project and being thoroughly cleaned.

2. cutting: The crystallized glass stone has high hardness and density with texture like jade. Therefore, following measure should be taken            when cutting:

1) Give priority to stable cutting machine with brand diamond saw blade for crystallized glass stone. If unavailable, marble cutter (granite machine is not applicable)

    with diamond saw blade can be applied.

2) Ensure sufficient cooling water to damage or explosive disruption to saw blade caused by overheat.

3) Always keep the saw blade forward in one way and draw it back after tiles have been removed to prevent accidental damages to the crystallized glass tone when     

    returning.

4) Handheld electric marble saw is hard to operate and should be operated by trained and experienced workers. Ensure cooling water ejected aiming at the cutting

    position all the time. Cut a shallow slot first as a guiding slot for following cutting to ensure smooth cutting and avoid damages caused by swinging of the blade.

5) Due to high wearing of cutting edge, the blade should be edged timely to ensure the sharpness of the diamond cutting edge. No matter which cutter you choose,

    excellent edging materials should be ensured. And common refractory fireclay block is recommended.

3. Laying: Organic glues with appropriate flexibility are recommended to bind the tiles. Application of traditional slush technique in laying on the floor may cause cracks

    to some tiles. In view of this, improving measures are as follows:

1) It is necessary to add saw dust of proper amount to both bedding of the slush and plain cement directly pasted to the bottom of the bricks.

2) As regards the type of cement, the strength of the cement for the bedding should be lower than 400#, and better to be 350#. Plain cement should apply 275#

    white cement.

3) Recommended amount of addition of saw dust is respectively10-15% and 5-7% for bedding slush and plain cement and should be applied according to specified   

    amount after on-site test for specific engineering situations. On the premise of not influencing mixing performance, the amount should be as large as possible. Add

    a little 107 liquid cement if necessary.

4) Brickwork joint should be washed clean before joint filling. Paste the four sides of the tile along the joints with color protective paper and then carry out operation

    with appropriate filler