BF-3110 is a professional FM two-way radio with excellent
performance and stability. Its clear audio and long battery life all contribute
to a friendly UE, making it a great choice for small businesses and amateur
radio lovers.
Channel
Announcement
When the
user is switching channels using the channel knob, the radio will announce the
current channel number. The user can choose from Chinese and English
announcements, or he can turn off this feature if he doesn’t need it.
Squelch
Levels (0-9)
This
feature helps to reduce background noise and deliver a clearer audio. The user
can set the squelch level according to his communication needs.
VOX
This
function helps you to enjoy hand-free operation. You can transmit via your
voice while your hands are doing more important things. (It needs to be used
with a paired accessory.)
TOT (Timeout Timer)
This can
effectively prevent a channel from being unnecessarily occupied by mis-operation.
The user can set a timeout for each transmission (10-300 seconds). When the
time is out, the transmitting will automatically stop and a warning tone will
go off.
Transmission
Beep
When this
feature is activated, a beep will go off either before or right after a
transmission (or both) according to the radio’s setting. This helps to reassure
the user of the successful transmission of a signal.
Scan
This
enables the user to monitor all the radio communications on the preset
channels. The user can stop at any channel he wants. BF-3110 will only scan
preset channels.
Programmable
Bandwidth
BF-3110
supports both wide (25kHz) and narrow (12.5kHz) bands. The user can set the
bandwidth via the PC programming software according to his communication needs.
Busy Channel
Lockout (BCL)
When
activated, this feature prevents the radio from receiving unauthorized signals
or transmitting signals to busy channels. So channels can be kept from
unnecessary interference.
QT/DQT
This helps
to keep out unwanted signals and deliver more channel clarity and efficiency.
Low Battery
Alert
When the
user turns on BF-3110, the radio will automatically run a battery check. When
the voltage is lower than 3.3V, the LED will flash red and a warning tone will
go off every other ten seconds. The user will find the radio unable to
transmit. Please recharge your battery A.S.A.P.
Monitor
The user
can use this feature to pick up weak signals on a channel. When there is no
radio signals on the current channel, the user can adjust the radio volume
according to the volume of the background noise.
