BelFone long talk range analog radio BF-7110 comes with a tensile
antenna to further extend the communication coverage. Its robust body and rich
features both serve to make it an ideal choice for security workers,
construction sites and many more fields of work.
VOX
This
function helps you to enjoy the hand-free operation. You can transmit via your
voice while your hands are doing more important things. (It needs to be used
with a paired accessory.)
Squelch Levels (0-9)
This
feature helps to reduce background noise and deliver a clearer audio. The user
can set the squelch level according to his communication needs.
Channel
Announcement
When the
user is switching channels using the channel knob, the radio will announce the
current channel number. The user can choose from Chinese and English
announcements, or he can turn off this feature if he doesn’t need it.
TOT
(Timeout Timer)
This can
effectively prevent a channel from being unnecessarily occupied by
mis-operation. The user can set a timeout for each transmission. When the time
is out, the transmitting will automatically stop and a warning tone will go
off.
Scan
This
enables the user to monitor all the radio communications on the preset
channels. The user can stop at any channel he wants. BF-7110 will only scan
preset channels.
High/low
Power Switchable
The user
can switch between high and low transmitting powers (H: 7W L: 1W
). This makes BF-7110 more flexible and can extend the battery standby
time when high power is not needed.
Programmable Bandwidth
BF-7110 supports both wide (25kHz) and narrow (12.5kHz) bands. The user can set the
bandwidth via the PC programming software according to his communication needs.
Busy
Channel Lockout (BCL)
When
activated, this feature prevents the radio to receive unauthorized signals or
transmit signals to busy channels. So channels can be kept from unnecessary
interference.
QT/DQT
The user
can only receive signals programmed with the same QT/DQT code, which can
effectively keep off unwanted signals.
Low Battery Alert
When the
user turns on BF-7110, the radio will automatically run a battery check. When
the voltage is lower than 3.3V, the LED will flash red and a warning tone will
go off every other ten seconds. The user will find the radio unable to
transmit. Please recharge your battery A.S.A.P.
Monitor
The user
can use this feature to pick up weak signals on a channel. When there is no
radio signals on the current channel, the user can adjust the radio volume
according to the volume of the background noise.
