Pure Melamine Moulding Compound is melamine formaldehyde molding plastic. It is made from melamine formaldehyde resin as the base material with "alpha" cellulose as a filler, add pigment and other additives. It has the characteristics of water resistance, high temperature resistance, non-toxicity, bright color and convenient molding. Melamine molding comound is widely used in all kinds of melamine tableware, containers, electrical parts and other molding products.
Intertek Report:
The conclusion of tested submitted sample (MELAMINE CHILDREN DINNERWARE)
|
Standard
|
Result
|
|
European Commission Regulation No.
10/2011, Amendment (EU) 2016/1416 of 24 August 2016 and Regulation No.
1935/2004- Overall migration
|
Pass
|
|
European commission regulation NO.
10/2011 annex II, Amendment (EU) 2016/1416 of 24 August 2016 and regulation
1935/2004 on specific migration of metal content
|
Pass
|
|
European commission regulation NO.
10/2011 annex I, Amendment (EU) 2016/1416 of 24 August 2016 and Regulation
1935/2004 on specific migration of Formaldehyde
|
Pass
|
|
European commission regulation NO.
284/2011 on specific migration of Formaldehyde
|
Pass
|
|
European commission regulation NO.
10/2011 annex I, Amendment (EU) 2016/1416 of 24 August 2016 and Regulation
1935/2004 on specific migration of Melamine
|
Pass
|
Physical
property:
Urea-formaldehyde moulding plastics and melamine-formaldehyde moulding plastics granule products can be molded by molding and injection. Melamine tableware is made from melamine powder through high temperature and high pressure. The tableware can be used in the high temperature above 100 degrees for a long time because of its thermal deformation temperature up to 180 degrees. The true color of melamine resin powder is light, so it can be colored freely.
|
Property
|
Unit
|
Compression
|
Injection
|
|
Appearance
|
-
|
Powder / Granular form
|
Granular form
|
|
Specific Gravity
|
-
|
1.45-1.55
|
1.45-1.55
|
|
Bending Strength
|
Mpa
|
79.0 Min.
|
79.0 Min.
|
|
Charpy Impact Strength
|
Kj / cm2
|
2.0 Min.
|
2.0 Min.
|
|
Water Absorption
|
%
|
0.8 Max.
|
0.8 Max.
|
|
Insulation Resistance
|
|
10
|
10
|
|
Disc Flow
(2g material, at 140˚c)
|
mm.
|
87 Min.
|
105 Min.
|
|
Curing Time
(2g material, at 140˚c)
|
sec.
|
100 Min.
|
140 Min.
|
Molding Condition
|
TYPE
|
ITEM
|
UNIT
|
CONDITION
|
|
COMPRESSION
|
Mold Temperature
|
˚c
|
160 - 165
|
|
|
Mold Pressure
|
Kg / cm2
|
150 - 200
|
|
|
Barrel Zone Temperature
|
˚c
|
60 - 80
|
|
|
Barrel Front Zone Temperature
|
˚c
|
80 - 100
|
Advantages:
Anti-scratch, anti-heat, no poison, good shining, bright color,high strength and no color changing issue with long term use.
Applications:
1.Fine tableware
2.Kitchenware, children's dinnerware
3.Kitchen utensil handles
4.Serving trays, buttons and Ashtrays
5.Electrical fittings and wiring devices
Storage:
Keep containers airtight and in a dry and well-ventilated place
Should be stored in a dry, ventilated location
Avoid direct sunshine and moisture
Stay away from heat, sparks, flames and other sources of fire
Factory Tour:
