RONGWIN WF67K-M series Fast Speed Energy-saving Servo Pump Control Hybrid CNC Press Brake
SVP system includes: 2 main servo motors + 2 servo drives, 2 internal meshing oil pumps, 2 oil tanks, 2 sets of proportional synchronization blocks, and 2 normally open filling valves.
RONGWIN WF67K-M series Fast Speed Energy-saving Servo Pump Control Hybrid CNC Press Brake SVP System
The SVP system use servo motor to drive pump.Hydraulic system transmit the kinetic energy to hydraulic oil , also control the cylinder working speed is controlled by the servo motor and pump capacity . The Displacement Sensor can help to adjust the cylinder working speed , the cylinder rod position can be adjusted precisely.
RONGWIN WF67K-M series Fast Speed Energy-saving Servo Pump Control Hybrid CNC Press Brake SVP System Featuers
–Save. Compared with the traditional transmission, saving 70% electricity .
– High. Work efficiency can be increased by 30%, reduce cycle time .
– Precision. Positioning accuracy, more than ±5 um .
–Quiet. Noise is reduced, machine tool working more quiet.
–Less. Hydraulic oil quantity less, only 20% of the traditional quantity .
–Easy. Machine manufacturing easier, maintenance easier , commissioning easier.
Impact on the environment and cost of use
– Significant reduction in energy consumption/cost and heat balance, reducing CO2 emissions.
– Reduced installed capacity. The servo motor can be significantly overloaded in a short time.
– It can reduce the volume of the oil tank and reduce the use of hydraulic oil. The oil consumption is only
30% of the traditional.
– Reduce or eliminate the cooling of hydraulic oil. Since it has been working at room temperature, the service
life of hydraulic oil is extended.
– Reduce noise.
RONGWIN WF67K-M series Fast Speed Energy-saving Servo Pump Control Hybrid CNC Press Brake Detail images
