Anhui Zhongdian Electric Co., Ltd.-sfyh.com

Static var generator SVG dynamic reactive power compensation(DRPC) Panel

SVG dynamic reactive power compensation(DRPC) is the new standard in reactive energy compensation. This power electronic current source is the accurate and highly reliable solution for today’s networks characterised by significant increase in harmonics, voltage variations caused by intermittent renewable sources connected to the network and voltage level due to the smart grid development. The DSP controlled IGBT topology enables a perfect compensation on each phase for both inductive and capacitive loads. It also correct phase unbalance where necessary. Immune to harmonics, resonance and voltage level, it offers a maintenance free solution reusable in any network configuration.

High voltage static var generator HV SVG Statcom outdoor container

ZDDQ SVG/STATCOM is a modular system from 6kv to 35kv, supplies reactive power to distribution grids with high regulating dynamics, and carries out regulating tasks such as voltage regulation or influencing the flow of reactive power.

High voltage outdoor SVC PLUS statcom

ZDDQ SVG/STATCOM is a modular system from 6kv to35kv, supplies reactive power to distribution grids with high regulating dynamics, and carries out regulating tasks such as voltage regulation or influencing the flow of reactive power.

Medium voltage outdoor Static Synchronous Compensator(STATCOM)

Medium voltage outdoor Static Synchronous Compensator(STATCOM) is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

High voltage reactive power compensator SVG STATCOM

High voltage reactive power compensator SVG STATCOM is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

6.6kv Indoor Static Synchronous Compensator/STATCOM/SVG

A Static Synchronous Compensator/STATCOM/SVG is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

Indoor 35kv STATCOM/SVG

Indoor 35kv STATCOM is a voltage regulating device of 35kv power grid. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

Medium voltage stepless reactive power compensation STATCOM

Medium voltage(6kv~35kv) stepless reactive power compensation STATCOM is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

6.6kv Stepless reactive compensator statcom statcon

6.6kv Stepless reactive compensator statcom statcon is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

Outdoor mobile STATCOM

ZDDQ Outdoor Mobile STATCOM is a modular system from 6kv to 35kv, supplies reactive power to distribution grids with high regulating dynamics, and carries out regulating tasks such as voltage regulation or influencing the flow of reactive power.

Medium voltage Statcom

Medium voltage(6kv~35kv) stepless reactive power compensation STATCOM is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

Static Synchronous Compensator (STATCOM)

A Static Synchronous Compensator(STATCOM) is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

Distribution STATCOM (Static Synchronous Compensator) for power quality control in substation

A STATCOM (Static Synchronous Compensator,Dstatcom) is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

13.8kv Static synchronous compensator SSC

13.8kv Static synchronous compensator SSC/STATCOM is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

Medium voltage dynamic reactive power compensation device Statcom

Medium voltage dynamic reactive power compensation device SVG STATCOM is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

STATCOMs FACTS Devices on both the transmission and distribution systems

STATCOMs FACTS Devices is a voltage regulating device. It is based on a power electronics voltage source converter (VSC) and can act as either a source or sink of reactive AC power. It is a member of the flexible AC transmission systems (FACTS) family which detects and instantly compensates for voltage fluctuations or flicker, as well as controls power factor.

low voltage automatic capacitor banks with filters

ZDDQ low voltage automatic capacitor banks with filters improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by improving power factor and filtering harmmonics.

Low voltage automatic power factor correction panels

ZDDQ Low voltage automatic power factor correction panels improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by improveing power factor and harmoncis filtering.

low voltage power factor improvement panel

ZDDQ low voltage power factor improvement panels improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by improving power factor and harmonics filtering.

TSC Thyristor switched capacitor banks

ZDDQ low voltage TSC automatic capacitor banks(Thyristor switched Capacitors) improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by improving power factor and filtering harmonics.

Low voltage electrical power factor corrector

ZDDQ Low voltage electrical power factor corrector improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by improving power factor and harmonics filtering.

Low voltage metal enclosed capacitor and filter banks

ZDDQ Low voltage metal enclosed capacitor and filter banks improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Low voltage metal enclosed capacitor and filter banks,equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by power factor improvement and harmonics filtering.

Low voltage metal enclosed automatic multi-step capacitor banks

ZDDQ low voltage metal enclosed automatic multi-step capacitor banks improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Metal enclosed automatic multi-step capacitor banks ,equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by power factor improvement and harmonics fitering.

300kvar power factor correcton Panel with static var generator

IGBT controled power factor correction panel based on Static var generator SVG is the new standard in reactive energy compensation. This power electronic current source is the accurate and highly reliable solution for today’s networks characterised by significant increase in harmonics, voltage variations caused by intermittent renewable sources connected to the network and voltage level due to the smart grid development. The DSP controlled IGBT topology enables a perfect compensation on each phase for both inductive and capacitive loads. It also correct phase unbalance where necessary. Immune to harmonics, resonance and voltage level, it offers a maintenance free solution reusable in any network configuration.

Low votlage industrial power factor correction panel SVG panel

IGBT controled power factor correction panel based on Static var generator SVG is the new standard in reactive energy compensation. This power electronic current source is the accurate and highly reliable solution for today’s networks characterised by significant increase in harmonics, voltage variations caused by intermittent renewable sources connected to the network and voltage level due to the smart grid development. The DSP controlled IGBT topology enables a perfect compensation on each phase for both inductive and capacitive loads. It also correct phase unbalance where necessary. Immune to harmonics, resonance and voltage level, it offers a maintenance free solution reusable in any network configuration.

low voltage SVG best dynamic power factor panel

IGBT controled power factor correction panel based on Static var generator SVG is the new standard in reactive energy compensation. This power electronic current source is the accurate and highly reliable solution for today’s networks characterised by significant increase in harmonics, voltage variations caused by intermittent renewable sources connected to the network and voltage level due to the smart grid development. The DSP controlled IGBT topology enables a perfect compensation on each phase for both inductive and capacitive loads. It also correct phase unbalance where necessary. Immune to harmonics, resonance and voltage level, it offers a maintenance free solution reusable in any network configuration.

low voltage power factor capacitor bank with filters

ZDDQ low voltage power factor capacitor bank with filters improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring by improving power factor and filtering harmmonics.

6kv APFC panel with individual compensation

6KV APFC panel (automatic power factor correction)/ individual reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

35KV Automatic Power Factor Correction Panel with group compensation

35KV APFC panel (automatic power factor correction)/group reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

27.5KV Active Power Factor Correction Panel based on Static Var Compensator

27.5KV automatic power factor correction/reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

Medium voltage Static Var Compensator SVC with Vaccum Contactors multi steps switching

Medium voltage Static Var Compensator(SVC) reactive power compensation systems/ automatic power factor correction panels are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

3.3KV Local reactive power compensation for motors,Arc Furnace

3.3KV local reactive power compensation systems( APFC automatic power factor correction) are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

Medium Voltage Metal Enclosed Harmonic Filter Capacitor Banks

Medium Voltage Metal Enclosed Harmonic Filter Banks are custom designed for application on industrial, commercial, and utility power systems that require medium voltage power factor correction, var and voltage support, and mitigation from harmonic resonance or harmonic distortion. The harmonic filter banks are configurable as fixed or automatic controlled with 1 or more stages at voltages from 2.4kV through 38kV.

High voltage Automatic Capacitor banks

High votage automatic capacitor banks/reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

Medium voltage Automatic Capacitor banks with harmonic filters

Medium voltage automatic power factor correction/reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

High voltage Automatic Power Factor Control Panel for Motors VFDs

High voltage automatic power factor control/reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

Medium voltage Automatic Capacitive Var Compensator SVC

Medium voltage automatic power factor correction/ capacitive Var Coompensator systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

High voltage Automatic Power Factor improvement plant for Motors VFDs

High voltage automatic power factor correction/reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

Medium voltage Automatic Power Factor Control Panel for Motors

Medium voltage automatic power factor control panel/reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

10KV Automatic Power Factor Correction Panel based on SVC

10KV automatic power factor correction/reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

Company profile

All products