Ausland MDS-9001 For Hyundai/KIA Car OBD2 Scanner Tool ABS SRS EPB CBS Code Scanner

For Hyundai Series car -- Hyundai and KIA

MDS-9001 Multi-diag specialist is professional handheld scan tool, not only for small garages, independent repairs, enthusiasts, but also for technicians by delivering OE-level diagnosis on all the electronic systems. It has basic functions such as codes and live data, and capable of advanced functions too, such as actuation, adaptation and programming. In addition, it can lets you to access oil service light reset, throttle body adjustment, DPF regeneration and much more commonly required service features.

Ausland MDS-9001 Full System OBD2 Scanner Features:

1. Works on all systems
2. Reads & Clear trouble code (generic & manufacturer specific DTC’s) on all the systems such as engine, transmission, abs and airbag
3. On-board readiness monitoring- to read the results of on-board diagnostic monitoring tests for specific components systems
4. Requests and records live sensor data
5. Provides live data graphing, Merges graphs for easy and intuitive diagnosis
6. Displays freeze frame data, providing freeze frame data as snapshot of the operating conditions at the time of an emission-related fault
7. Performs most adaptations, Does active tests on systems and components
8. Performs special functions, coding, security access
9. Retrieve ECU information
10. EVAP test – initiating a leak test for the vehicle’s EVAP system with necessary
11. procedures available
12. Fuel injection (all gasoline & 12 V diesel)
13. Resets oil service light, Oil light/service reset – supporting service lamp reset, brake pad reset service mileage, check engine light, and service interval
14. Turn off the ECU warning light, diagnoses EPB/SBC functionality
15. View & graph live data for real time graphing/live data reading
16. Component for bi-directional tests such as cycling abs solenoids
17. Re-calibration of brake control module after changing the brake pads replacement
18. Sets inspection 1, 2 service interval
19. Sets (non) long life oil service
20. Sets inspection mileage
21. Deactivates and re-activates brake control system
22. Retracts calipers for brake pad replacement
23. Returns calipers to the original position
24. Initializes the wear indicator if new pads installed
25. Diagnoses EPB caliper functionality
26. Code troubleshooters for faster and easier diagnosis
27. Multilingual menu options and code definitions
28. Memory card for data backup and software update by internet
29. Large TFT color screen and menu-driven operation
30. Multi System Platform capable

• Read fault codes
• Clear fault codes
• Retrieve data stream
• EVAP test
• Vehicle information
• I/M Readiness

1. CONFIGURE THE LATERAL ACCELERATION SENSOR
2. CONFIGURE THE LONGITUDINAL ACCELERATION SENSOR
3. CONFIGURE THE PRESSURE SENSOR
4. CONFIGURE THE STEERING ANGLE SENSOR
5. DIESEL PARTICULATE FILTER STATIC REGENERATION
6. ENTER THE FUEL INJECTOR DEFAULT COUNT VALUE
7. FUEL INJECTOR CORRECTION FACTORS
8. KOEO ON DEMAND SELF-TEST
9. MODULE INITIALIZATION
10. PULL DRIFT COMPENSATION
11. RESET DIFFERENTIAL PRESSURE SENSOR LEARNED VALUES
12. RESET KAM
13. RESET THE DIESEL PARTICULATE FILTER LEARNED VALUES
14. RESET THE EXHAUST GAS RECIRCULATION VALVE LEARNED VALUES
15. RESET THE EXHAUST GAS TEMPERATURE
16. RESET THE FUEL INJECTOR LEARNED VALUES
17. RESET THE HEATED EXHAUST GAS OXYGEN SENSOR LEARNED VALUES
18. RESET THE HIGH PRESSURE FUEL SYSTEM LEARNED VALUES
19. RESET THE INTAKE AIR THROTTLE VALVE LEARNED VALUES
20. RESET THE MASS AIR FLOW SENSOR LEARNED VALUES
21. RESET THE POWERTRAIN CONTROL MODULE LEARNED VALUES
22. RESET THE TURBOCHARGER VARIABLE VANE POSITION SENSOR LEARNED VALUES
23. RESET THE WATER IN FUEL WARNING
24. STRAIGHT AHEAD ADAPTION ANGLE RESET

Main unit             1pc
Main Cable            1pc
OBDII-16 Connector    1pc
USB Cable            1pc
User Manual           1pc