CNC600 PRO INJECTOR TESTER & CLEANER TECHNICAL PARAMETER
Dimensions: 400mm(L)* 450mm(W)* 510mm(H)
Power: 85-132vac/170-264vac 47-63Hz
Fuel tank capacity: 4.5L
Ultrasonic wave frequency: 40KHz
Ultrasonic wave power: 100W
Rotate speed:0-9975r/min, step: 25r/min
Pulse width: 0-30ms, step:0.1ms
Count: 0-9975r, step: 25r
Time: 0-9975s, step: 5s
System pressure: 0-6.2kg/cm²(variable regulated)
System flow: 4L/min
Test cylinder: 8 (max)
Test tube capacity: 120cc
CNC600 PRO INJECTOR TESTER & CLEANER FUNCTION/FEATURES:
1.Can test injector resistance ( one by one ), and display the data.
2.Can test the defects of leaking, blocking, atomization, spray pattern, flow.
3.Solenoid valve drain the liquid to tank, have LED of backlight.
4.Cumulative testing and engine simulation testing.
5.Using pulse width modulation to control and adjust fuel pressure.
6.Have Auto function, manual function.
7.Ultrasonice cleaning, can set the working time, the max time is one hour, at the same time the injector is working.
8.Can test and clean GDI,FSI,SIDI,MPI,SPFI,TBI,CFI,K-JET,LPG,Motorbike-injector,including high or low resistance injector.
9.The display for LED.