Company profile

In combination with the new economic trend of the world industrial Internet, on the basis of reshaping and transforming the industrial chain and internal value chain of the energy equipment vertical industry, our EBOOMBY e-commerce service platform came into being.

All products

Continuous Stirred Tank Reactor Still

This equipment is used for hydrolysis, neutralization, crystallization, distillation, evaporation and production processes Other processes in medicine, chemical industry, food and light industry. It has acid resistance, high temperature resistance and abrasion resistance Corrosion and corrosion resistance. It can also be produced according to user requirements.

Circulating Water Pump

Water pump are widely used in below systems Water treatment systems Industrial washing systems Water supply systems Firefighting systems Cooling/air-conditioning systems Boiler feed systems Other industrial applications

Brake Valve

No brief introduction

Indirect Evaporative Cooling Tower For Industrial Refrigeration

The structure and working principle of enclosed cooling tower During operation, the cooling medium (soft water, oil, or other liquid) is driven by the circulation flow of the main circulating pump between the heat exchanger and the equipment (such as the power supply and the furnace).The heat exchanger evenly forms a layer of water film on the heat exchange surface, and cold air enters the tower through the air inlet below the heat exchange surface with water. There are two heat exchange methods in this process.Between the cold air and the cooling medium, as well as the heat exchange of evaporative water and the absorption of spray water, the hot and humid air is discharged from the air into the atmosphere, and other water flows into the tank below the tower, which is then pumped into the top sprinkler system to cool the cooling medium in the reciprocating heat exchanger.Cooling medium in reciprocating heat exchangers.

Air Cooled Screw Chiller Cooling Refrigerating Machine

1.Designed refrigeration condition:Chillered water in/out is 12℃/7℃;Cooling water in/out is 30℃ and 35℃; 2.Suitable chilled water temperature:9-25℃; 3.Power supply:380V-3PH-50HZ.With allowable difference:±10%,allowable voltage difference between phase:±2%; 4.The specification is based on R22,contact us if need for R134a,R407C and other refrigerant;

Centrifuge industrial separating machine

The Automatic Centrifuge is controlled by a fully-automatic program, and has been widely used in such industries as pharmacy, fine chemistry and for operating principle.

PSA Industrial High quality nitrogen generator

The PSA nitrogen generator is an air separation unit that selectively adsorbs oxygen in the air based on carbon molecular screening, and continuously produces gas nitrogen at room temperature. By reducing the pressure of the adsorption bed, the cyclic adsorption-desorption operation is performed to remove the adsorbed nitrogen. Perform desorption.

Mining Membrane Filter Press

The box-type filter press uses filter cloth as the medium for solid-liquid separation. It is a sorting machine suitable for large particle size range. The filter cloth is spread on the surface of the filter plate and is supported by the expansion groove of the filter plate. After the filter plate is clamped, the filter cloth becomes a sealing material. The cavity between each two filter plates forms an independent filter chamber. In the filtration process, the material enters the filter chamber through the center hole, the filtrate flows through the feed pressure, and flows out of the filter plate after confluence. Chamber filter press can be divided into open channel flow and culvert flow according to the way of filtrate. The plate and frame filter press separates solids from liquids in the form of filtration. It is a sorting machine suitable for large particle size range. The material passes through the filter chamber by the filter plate and the filter frame, the material under the pressure of feeding, the filtrate flows through the filter frame-fiber gap between the filter plate and the filter cloth, reaches the model surface, and the filter plate flows out after polymerization. The remaining solids will form a filter cake. The plate and frame filter can be divided into open channel flow and culvert flow according to the way of filtrate.

Headlamp

No brief introduction

MODBUS RTU

No brief introduction

Showing 4 to 6 of 6 (4 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.