Topstar Technology Industrial Co., Ltd.-sfyh.com

Original Finisar FTLX1612M3BTL 40km XFP Optical Transceivers

Finisar's industrial temperature 40km FTLX1612M3BTL Small Form Factor 10Gb/s XFP transceiver complies with the current XFP Multi-Source Agreement (MSA) Specification. They comply with SONET OC-192 IR-2, OC-192 IR-3, SDH STM S-64.2b, STM S-64.3b as well as with 10-Gigabit Ethernet 10GBASE-ER/EW per IEEE 802.3ae and 40km 10G Fibre Channel applications. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The 40km XFP ER transceiver is RoHS compliant and lead-free per Directive 2011/65/EU, and Finisar Application Note AN-2038.

Original Finisar FTLX1812M3BNL Extended Temperature 80km XFP Optical Transceivers

Finisar's 10Gb/s Extended Temperature XFP Range 80km TDM XFP transceivers comply with the current XFP Multi-Source Agreement (MSA) Specification, INF-8077i, revision 4.5 supporting an operating temperature range of -5oC to +85oC. They comply with 80km SONET OC-192 and SDH STM-64 per ITU-T G.959.1 P1L1-2D2, and also support 10GBASE-ZR/ZW 80km 10-Gigabit Ethernet, 10G Fibre Channel, 8G Fibre Channel, 10G CPRI, and OTN/FEC protocols OTU2, OTU1e, and OTU2e. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Original Finisar FTLX1812M3BTL ZR 80km XFP Optical Transceivers

Finisar's 10Gb/s Industrial Temperature Range 80km TDM XFP transceivers comply with the current XFP Multi-Source Agreement (MSA) Specification, INF-8077i, revision 4.5 supporting an operating temperature range of -40oC to +85oC. They comply with 80km SONET OC-192 and SDH STM-64 per ITU-T G.959.1 P1L1-2D2, and also support 10GBASE-ZR /ZW 80km 10-Gigabit Ethernet, 10G Fibre Channel, 8G Fibre Channel, 10G CPRI, and OTN/FEC protocols OTU2, OTU1e, and OTU2e. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Original Finisar FTLX3613M3xx C-Band DWDM Fixed 40km Optical Transceivers

Finisar’s 40km DWDM FTLX3613M3xx Small Form Factor 10Gb/s XFP transceivers comply with the current XFP Multi-Source Agreement (MSA) Specification1. The transmitter specification is based upon SONET OC-192 IR-2, OC-192 IR-3, SDH STM S-64.2b, STM S-64.3b and 10-Gigabit Ethernet 10GBASE-ER/EW per IEEE 802.3ae Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceivers are compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-20384 for more details.

Original Finisar FTLX3912M3xx DWDM 40km Optical Transceivers for SONET OC-192 IR-2

Finisar’s 40km DWDM FTLX3912M3xx Small Form Factor 10Gb/s XFP transceivers comply with the current XFP Multi-Source Agreement (MSA) Specification1. The transmitter specification is based upon SONET OC-192 IR-2, OC-192 IR-3, SDH STMS-64.2b, STM S-64.3b and 10-Gigabit Ethernet 10GBASE-ER/EW per IEEE 802.3ae but uses an APD ROSA for additional link budget. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3. See Finisar Application Note AN-2038 for more details4.

Original Finisar FTLX6624MCC C-Band DWDM XFP Optical Modules

Finisar’s FTLX6624MCC-xx Small Form Factor 10Gb/s (XFP) transceiver complies with the XFP Multi-Source Agreement (MSA) Specification. It supports amplified DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over 40km of fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3. See Finisar Application Note AN-2038 for more details4.

Original Finisar FTLX6611MCC DWDM ER XFP Optical Modules

Finisar’s FTLX6611MCC-xx Small Form Factor 10Gb/s (XFP) transceiver complies with the XFP Multi-Source Agreement (MSA) Specification1. It supports amplified DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over 40km of fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3. See Finisar Application Note AN-2038 for more details4.

Original Finisar FTLX3912M3xx Fixed 40km DWDM Modules

Finisar’s 40km DWDM FTLX3912M3xx Small Form Factor 10Gb/s XFP transceivers comply with the current XFP Multi-Source Agreement (MSA) Specification1. The transmitter specification is based upon SONET OC-192 IR-2, OC-192 IR-3, SDH STM S-64.2b, STM S-64.3b and 10-Gigabit Ethernet 10GBASE-ER/EW per IEEE 802.3ae but uses an APD ROSA for additional link budget. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3. See Finisar Application Note AN-2038 for more details4.

Original Finisar FTLX3813M3xx 80km XFP ZR Optical Transceivers

Finisar’s FTLX1812M3BTL Small Form Factor 10Gb/s (XFP) transceiver complies with the current XFP Multi-Source Agreement (MSA) Specification, INF-8077 (rev 4.5). It supports amplified DWDM 10Gb/s SONET/SDH and 10-Gigabit Ethernet applications based on the ITU G.698.1, DW100S-2Dx specification. This device also supports 10GFC and 8GFC for storage applications. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Original Finisar FTLX3815M3xx Finisar DWDM XFP ZR Optical Transceivers

Finisar’s FTLX1812M3BTL Small Form Factor 10Gb/s (XFP) transceiver complies with the current XFP Multi-Source Agreement (MSA) Specification, INF-8077 (rev 4.5). It supports amplified DWDM 10Gb/s SONET/SDH and 10-Gigabit Ethernet applications based on the ITU G.698.1, DW100S-2Dx specification. This device also supports 10GFC and 8GFC for storage applications. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Original Finisar FTLX6824MCC +1600 ps/nm 80km Gen2 Tunable XFP Optical Transceiver

The FTLX6824MCC Small Form Factor 10 Gb/s (XFP) transceiver is Finisar’s next generation T-XFP design and it complies with the XFP Multi-Source Agreement (MSA) Specification1 while supporting advanced performance enhancements. It supports amplified DWDM 10 Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over 80km of fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3. See Finisar Application Note AN-2038 for more details4.

Original Finisar FTLX6824MNC Tunable XFP Optical Transceivers

The FTLX6824MNC Small Form Factor 10Gb/s (XFP) transceiver is Finisar’s next generation T-XFP design which supports the E-temp operating range and it complies with the XFP Multi-Source Agreement (MSA) Specification1 while supporting advanced performance enhancements. The Tunable XFP supports amplified DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over 80km of fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3. See Finisar Application Note AN-2038 for more details4

Original Finisar FTLX6825MCC +1600 ps/nm 80km XFP ZR Tunable XFP Optical Transceivers

The FTLX6825MCC Small Form Factor 10Gb/s (XFP) transceiver is Finisar’s next generation T-XFP design with high optical output power and it complies with the XFP Multi-Source Agreement (MSA) Specification1 while supporting advanced performance enhancements. It supports amplified DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over 80km of fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3. See Finisar Application Note AN-2038 for more details4.

Original Finisar FTLX6811MCC 80km XFP ZR Tunable Optical Transceivers

Finisar’s FTLX6811MCC-xx Small Form Factor 10Gb/s (XFP) transceiver complies with the XFP Multi-Source Agreement (MSA) Specification1. It supports amplified DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over 80km of fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3. See Finisar Application Note AN-2038 for more details4.

Original Finisar FTLX4213M3BCL +2400 ps/nm 120km TDM XFP Optical Transceiver

Finisar’s FTLX4213M3BCL Small Form Factor 10Gb/s (XFP) transceiver complies with the XFP Multi-Source Agreement (MSA) Specification1. It supports 10Gb/s SONET/SDH,10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over ~120km of fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC3, and Finisar Application Note AN-20384.

Original Finisar FTLX4213xxxxxx 200km XFP Optical Transceivers

Finisar’s FTLX4213x3xxxx Small Form Factor 10Gb/s (XFP) transceiver complies with the XFP Multi-Source Agreement (MSA) Specification1. It supports amplified DWDM 10Gb/s SONET/SDH +FEC,10 Gigabit Ethernet +FEC, and 10 Gigabit Fibre Channel +FEC applications over ~200km of fiber without dispersion compensation. The standard product supports narrow tunability on the C- and L-Band channels with 50GHz spacing. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC3, and Finisar Application Note AN-20384.

Original Finisar FTLX3813F3xx 8.5G XFP Optical Transceivers

Finisar’s FTLX3813F3xx Small Form Factor 10Gb/s (XFP) transceiver complies with the current XFP Multi-Source Agreement (MSA) Specification, INF-8077 (rev 4.5). It supports 8GFC for storage/enterprise applications. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The optical transceivers are compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

FTLX2071D333 10Gb/s 10km Single Mode Bidirectional Datacom RoHS-6 Compliant SFP+ Transceiver

FTLX2071D333 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over a single-strand Single Mode fiber. This capability doubles the capacity of installed legacy single mode fiber links. They are compliant with SFF-8431 and IEEE 802.3ae 10GBASELR/LW , and 10G Fibre Channel 1200-SM-LL-L . Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472 . The FTLX2071D327/FTLX2071D333 is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2011/65/EC , and Finisar Application Note AN-2038 .

Finisar FTLX2071D327 LC Single Mode SFP Plus BIDI 10GB 1270nm 10km Transceiver Module

FTLX2071D327 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over a single-strand Single Mode fiber. This capability doubles the capacity of installed legacy single mode fiber links. They are compliant with SFF-8431 and IEEE 802.3ae 10GBASELR/LW , and 10G Fibre Channel 1200-SM-LL-L . Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472 . The FTLX2071D327 is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2011/65/EC , and Finisar Application Note AN-2038 .

Finisar FTLX1871M3BCL 10Gb/s 1550nm 80km Single Mode SDH STM-64 SFP+ Transceiver

Finisar’s FTLX1871M3BCL transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431 , SFF-8432 and G.959.1 P1L1- 2D2, and support SONET OC-192, SDH STM-64, 10G Ethernet ZR and 10G Fibre Channel. Finisar’s FTLX1871M3BCL transceivers use internal clock and data recovery (CDR) IC’s for the transmitter and the receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472 . The optical transceiver is compliant per the RoHS Directive 2011/65/EU . See Finisar Application Note AN-2038 for more details .

FTLX1871D3BCL 10Gb/s SFP+ 80km Single Mode SFP-10G-ZR Transceiver

Finisar’s FTLX1871D3BCL transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431 , SFF-8432 and support 10G Ethernet ZR and 10G Fibre Channel. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472 . The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

FTLX1871D3BNL Finisar 10GBASE-ZR 80km Single Mode, Multi-Rate SFP+ Transceiver

Finisar’s FTLX1871D3BNL transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431 , SFF-8432 and support 10G Ethernet ZR and 10G Fibre Channel. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Finisar’s FTLX1871D3BNL transceivers are RoHS compliant as per Directive 2011/65/EU and Finisar Application Note AN-2038.

Finisar FTLX1671D3BTL Network Transceiver Module SFP+ up to 40 km 10.3 Gb/s LC 1550nm

Finisar’s FTLX1671D3BTL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER/EW. The FTLX1671D3BTL incorporates advanced CML™ technology, and is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF- 8472. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038.

FTLX1672D3BNL Finisar 10G 8G Fibre Channel 40km SFP+ LC SMF 1550nm Optic Fiber Transceiver

Finisar’s FTLX1672D3BNL transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431 , SFF-8432 and 10GBASE-ER, and support 10G Fibre Channel over 40km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472 . The optical transceiver is compliant per the RoHS Directive 2011/65/EU . See Finisar Application Note AN-2038 for more details .

FTLX1672D3BCL 10Gb/s 40km Single Mode Multi-Rate CPRI Finisar SFP+ Transceiver

Finisar’s FTLX1672D3BCL transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431 , SFF-8432 and 10GBASEER/EW; support 4x, 8x and 10x Fibre Channel, as well as CPRI option 2 through 8, over 40km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472 . Finisar’s FTLX1672D3BCL transceivers are RoHS compliant per Directive 2011/65/EU.

FTLX1472M3BCL 10Gb/s 2/10km Single Mode Multi-Rate 10G SFP+ LR Optical Transceiver

Finisar’s FTLX1472M3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit, multi-rate links up to a maximum 10km over G.652 single mode fiber. They are compliant with SFF-8431 , SFF-8432 , ITU-T G.693 VSR2000-2R1, SDH I-64.1 and OTN P1I1-2D1 (up to 2km), IEEE 802.3ae 10GBASE-LR/LW and 10G Fiber Channel 1200-SM-LL-L (up to 10km). Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF8472 . The FTLX1472M3BCL transceivers utilize internal clock and data recovery (CDR) units on the transmitter and the receiver chains for SONET/SDH jitter compliance and to enhance the signal integrity on XFP XFI-like host card designs. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FTLX1472M3BNL 10GBASE-LR OC-192 1310nm 10km Single Mode SFP+ Transceiver

Finisar’s FTLX1472M3BNL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in links up to 10km over G.652 single mode fiber, and they are equipped with internal transmitter and receiver retimer units (Clock and Data Recover, or CDR) to comply to SONET/SDH jitter requirements and to enhance host cards’ high speed data-signal integrity.

Finisar FTLX8571D3BNL Extended Temperature 10GBASE-SR/SW SFP+ 850nm 300m Ethernet Optical Transceiver

Finisar’s FTLX8571D3BNL Extended Temperature 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet and 10-Gigabit Fibre Channel links over multimode fiber. They are compliant with SFF-8431, SFF-8432 , IEEE 802.3ae 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I . Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472 . The FTLX8571D3BCL is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperability with an SFP+ limiting module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC , and Finisar Application Note AN2038.

10G/1G FTLX8571D3BCV Dual Rate (10GBASE-SR and 1000BASE-SX) 300m Multimode SFP+ Optical Transceiver

Finisar’s FTLX8571D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, IEEE 802.3-2005 10GBASE-SR/SW and 1000BASE-SX . Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF8472 . The FTLX8571D3BCV is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperability with an SFP+ limiting module. This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-20386.

Finisar FTLX8571D3BCL 10Gb/s 850nm Multimode RoHS-6 Compliant Datacom SFP+ Transceiver

Finisar’s FTLX8571D3BCL 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432 , IEEE 802.3ae 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF8472. The FTLX8571D3BCL is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC , and Finisar Application Note AN-2038.

Finisar FTLX1412D3BTL Duplex XFP 10Gbps 10km SMF DDM 1310nm XFP Transceiver

Finisar’s FTLX1413D3BTL Small Form Factor 10Gb/s (XFP) transceivers are compliant with the current XFP Multi-Source Agreement (MSA) Specification. They comply with 10-Gigabit Ethernet 10GBASE-LR/LW per IEEE 802.3ae, 10G Fibre Channel 1200-SMLL-L, 8G Fibre Channel 800-SM-LC-L, and 10G CPRI. This transceiver can also support OTN/FEC protocols OTU1e and OTU2e upon request.Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. If SONET/SDH compliance is required, please see Finisar Part Number FTLX1413M3BCL. The optical transceiver is compliant per the RoHS Directive 2011/65/EU3. See Finisar Application Note AN-2038 for more details.

Industrial Temperature Range FTLX8511D3BTL 10GBASE-SR XFP 850nm 300m Optical Transceiver

Finisar’s FTLX8511D3BTL Small Form Factor 10Gb/s (XFP) transceivers are compliant with the current XFP Multi-Source Agreement (MSA) Specification now available with Industrial Temperature Range of Operation (-40°C to +85°C) They comply with 10-Gigabit Ethernet 10GBASE-SR/SW per IEEE 802.3ae and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC and Finisar Application Note AN-2038.

Finisar FTLX8571D3BCL 10G 850nm 300m Multimode Datacom SFP+ Transceiver

Finisar’s FTLX8571D3BCL 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber.

Hot Pluggable Finisar FTLD1xCE1C 12x10G (120G) 100m CXP Optical Transceiver

Form Factor: CXP Finisar's FTLD1xCE1C CXP optical transceiver modules are designed for use in data center, core-routing, and high-performance computing applications up to 120 Gigabit per second links over multimode fiber. They are compliant with the InfiniBand Trade Association (IBTA) CXP Specification and IEEE 802.ba 100GBASE-SR10 and CPPI interfaces supporting 12 parallel, bi-directional data channels at rates from 1Gb/s to 10Gb/s per channel.

Finisar FTLD10CD3C 12x11.3G (120G) 300m Gen3 CXP Optical Transceiver

Form Factor: CXP Finisar's FTLD10CD3C third-generation CXP optical transceiver modules are designed for use in data center, core-routing, and high-performance computing applications up to 135.6 Gigabit per second links over multimode fiber. They are compliant with the InfiniBand Trade Association (IBTA) CXP Specification, IEEE 802.ba 100GBASE-SR10 and CPPI interfaces supporting 12 parallel, bi-directional data channels at rates from 1G/bs to 11Gb/s per channel. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Company profile

All products