Lab 1400C Single Zone Tube Furnace Uses Silicon Carbon Rod as Heating Element
This tube furnace uses silicon carbon rod as heating element,
double-layer shell structure and Yudian temperature control instrument, which
can carry out multi-stage program temperature control, phase shift triggering,
thyristor control, and furnace polycrystalline fiber material. The flow meter
is used to control the intake flow. Both ends of the furnace tube can be sealed
by stainless steel flange. The stainless steel flange is equipped with a
nozzle, a valve and a pressure gauge. When vacuuming, the vacuum can reach 10-3
Pa. The furnace is horizontal. Easy to use and easy to operate. The furnace has
the advantages of temperature field balance, low surface temperature, fast
temperature rise and fall, energy saving, etc. It is an ideal product for high
temperature atmosphere sintering, atmosphere reduction, CVD experiment and
vacuum annealing in universities, research institutes and industrial and mining
enterprises.
|
Model
|
1400-I
|
1400-II
|
1400-III
|
|
Power
|
4 KW
|
4 KW
|
6KW
|
|
Tube
size（OD）(mm)
|
Dia 60 X1000
|
Dia80X1000
|
Dia100X1000
|
|
Corundum tube: high purity AIO ceramics (including) 99.5%
Two furnace plugs are placed on each side to block the heat
radiation from the furnace tube center. The plugs must be placed in the
correct position of the furnace chamber before heating
|
|
· Dimensions
|
1120X490X855
|
1120X490X855
|
1120X520X945
|
|
Supply voltage
|
220V
|
|
Phase
|
single phase
|
|
Heating element
|
silicon
carbide rod
|
|
Temperature control type
|
UAV program temperature control instrument
(standard)
1, 30-stage program temperature control
intelligent PID adjustment.
2. With over-temperature protection, the
electric furnace heating circuit is automatically cut off when the
temperature is over-temperature or broken, (when the electric furnace
temperature exceeds 1420 degrees or the thermocouple is blown, the AC relay
on the main circuit will be automatically disconnected, the main circuit is
broken. On, the ON light on the panel is off, the OFF light is on, and the
limited protection electric furnace).
3, with 485 communication interface (standard
when purchasing software)
4, with power-off protection function, that
is, when the power is turned on after the power is turned off, the program
does not start from the starting temperature, but the furnace temperature
rises from the time of power failure.
5, the meter
has the function of temperature self-tuning
(you need to pay extra for the replacement of imported instruments, optional)
  
FP93 temperature controller (shimashima, Japan) EUROPEAN instrument Touch screen instrument
|
|
· Chambermaterial
|
1. High-quality high-purity alumina
polycrystalline fiber curing furnace formed by vacuum suction filtration.
2, using Japanese technology molding, no slag,
good insulation.
3. The spacing
and pitch of the resistance wires in the furnace are all arranged according
to the best thermal technology in Japan, and the temperature field is
simulated by the thermal software.
|
|
Valve and flange
|
|
|
Control precision
|
+/- 1℃
|
|
Trigger
|
Phase-shifted trigger
|
|
Electric appliance
|
Zhejiang chint
|
|
Silicon controlled
|
106/16ESEMIKRON
|
|
Maximum temperature
|
1400℃
|
|
Rated temperature
|
1350℃
|
|
Heating rate
|
≤30℃/ Min(it can be modified as required)
|
|
Recommended rate of temperature rise
|
≤15 ℃/ Min
|
|
Thermocouple Type
|
S Type
|
|
Heating length
|
300mm
|
|
Temperature field curve
|
|
|
Temperature calibration (optional)
|
Regular temperature calibration of the tube
furnace maintains the accuracy and uniformity of the furnace temperature. You
can purchase a simple calibration tool from the company to assist you with
this work. The complete calibration kit includes standard thermocouples,
temperature calibrators, and compensation wires.
|
|
Peripheral
surface temperature
|
≤45℃
|
1 Standard exported package: Internal anticollision protection, external export wooden box packaging.
2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3 Responsible for the damage during the shipping process, will change the damage part for you for free.
