|
Input Voltage
|
108V-220 VAC 50/60Hz
|
|
110 V power is available by using a 1000 W transformer (15 A fuse).
The transformer is sold separately.
|
|
Output Poer
|
1600 VDC
|
|
250 W
|
|
150 mA max.
|
|
Built-in over current protection (>150 mA)
|
|
Specimen Chamber
|
Quartz glass tube, 165 mm OD. X 150 mm ID x 250 mm Height
|
|
Please click here to order the Quartz Chamber replacement.
|
|
Sputtering Head
& Specimen Stage
|
2“ flexible magnetron sputtering head with water cooling jacket is included (Fig.1)
|
|
One 50 mm Dia stainless steel sample stage is rotatable from 0 - 5 RPM
|
|
One manually operated shutter for target protection. (Fig.2)
|
|
Sputtering head holder is available for holding sputtering head while non-operation.
|
|
The distance between the sputtering head and sample stage is adjustable from 60 - 100 mm.
|
|
Max Coating area: 4" diameter max.
|
|
One Air Cold Recirculating Water Chiller 10 L/min Flow for cooling sputtering head,
the water chiller is optional . (Fig.6)
|
|
Control Panel
|
6" color touch-screen control panel with PLC integration for easy operation
|
|
One panel for all parameters monitor and control: vacuum, current.
|
|
Ultimate Vacuum
Pressure
|
Built-in KF25 vacuum port
|
|
The system requires an Ar gas tank with pressure regulator. (not included)
|
|
< 1.0E-2 Torr by Vane vacuum pump (not included) for Au, Ag, Pt, Cu,
Mo targets (not sensitive to air)
|
|
< 1.0E-5 Torr by Turbomolecular pump (not included) for Al, Mg, Li, Lr, Ti, Zn
targets (sensitive to air)
|
|
The lowest vacuum may reach < 4.0E-6 Torr by pumping overnight and baking
|
|
Gas Atmosphere
|
One needle valve installed to allow Ar gas inlet to achieve better plasma coating
|
|
The system requires an Ar gas tank with pressure regulator (not included)
|
|
Target
|
One 2" Copper target is included for testing, Target size: 2" Dia.x 2.5mm.
|
|
It also can coat Ag, Al, Cr, Ni, Pt, Ti, Sn, Li, Mg, etc. almost every kind of metallic material.
|
|
Warning : Aluminum ,Chromium or Nickel Target can be coating by this machine,
but please view the Recommend Coating Method before using.Please using RF Plasma
Magnetron Sputtering for coating Alumina
|
|
Optional Film
Thickness Monitor
|
Film thickness monitor is optional at extra cost
|
|
Heatable sample stage up to 500°C is available upon request at extra cost
|
|
Flowmeter for accurate control gas inlet is available upon request at extra cost.
|
|
Overall Dimension
|
L 440 mm×W 330 mm × H 290 mm
|
|
Net Weight
|
20 kg
|
|
Shipping Weight
& Dimension
|
160 lbs
|
|
45" x 45" x 40"
|
|
Compliance
|
CE approval
|
|
MET Certification (UL 1450) is available upon request at extra cost, please contact our sales
representative for quote.
|
|
Warranty
|
One year limited with lifetime support
|
|
Application Notes
|
Warning: Sputtering head connects to HIGH voltage. The operator must wear gloves
during operation
|
|
Make sure the target, sputtering head, substrate, and heating stage are clean before coating,
need to use the sandpaper and alcohol to clean and fresh the Al or Nickel target each time using.
|
