Technical features:
|
|
|
|
|
|
|
|
|
|
High float charge efficiency
|
|
High reliability
|
|
Trouble free long cycle life
|
The battery adopts high perfomance positive and negative active materials, improving the charging efficiency of positive and negative electrodes, reducing the float-charge voltage of the battery, under the lower float charge voltage
|
|
Ni-Cd is equally dependable in controlled city environments or harsh, unpredictable conditions in the world's most remote and unpopulated areas.
High tolerance to rough handling and mechanical abuse due to strong components & robust construcation
|
|
The EverExceed nickel-cadmium block battery's unique electrochemistry enables it to regularly withstand any depth of discharge. Following a deep discharge the block battery is designed to recharge very quickly and economically, using standard single or two-level charging equipment
|
|
|
|
|
|
|
|
|
|
|
|
Easy storage and installation
|
|
Low maintenance
|
|
Long service life
|
|
Nickel-cadmium block batteries are quick and easy to install as original equipment and may be stored for many years in a discharged state under correct conditions
|
|
Adopts "valve-regulated vent plug technology", therefore, the water consumption is low, the electrolyte is rich. Within service life, the battery top up time up to 3~5 years due to EverExceed excellent valve-regulated feature
|
|
Up to 20+ years completely faithful service. No replacement cost & no downtime
|
|
|
|
|
|
|
|
|
|
|
Low discharge rate
|
|
Assured quality
|
|
Wide operating temperature range
|
|
The discharge time for 3h to 100h; Rated capacity range:10~ 1100Ah
|
|
Authorative TUV, CE certificates and IEC60623,IEC62259 test reports
|
|
Generally operating between temperatures of -40°C to +60°C, they can tolerate extremes of -50°C to
+70°Cfor short periods
|
|
|
|
|
|
|
|
①Protective cover
To prevent external short-circuits；
In line with EN50272-2(safety) with ip2 level；
②Plate groups bus
Connects the plate tabs with the terminal post；
Plate tabs and terminal post are projection-welded to the plate groups bus；
③Plate
Horizontal pockets of double-perforated steel stirps；
④Cell container
Material:translucent transparent polypropylene；
⑤Flame-arresting vents
Material: polypropylene；
⑥Plate tab
Spot-welded both to the plate side-frames and to the upper edge of the pocket plate；
⑦Separating grids
These separate the plates and insulate the plate rames from each other；
The grids allow free circulation of electrolyte between the plates；
⑧Plate frame
Seals the plate pockets and serves as a current collector.
|
Applications:
• Railway DC power supply, UPS switch transition, power plant, substation, and other back up power supply
Factory:
