Shenzhen Tenlog 3D Technology Co., Ltd-sfyh.com

Tenlog Multi Nozzle 3D Printer Motherboard with DMP 3D Printing System Support Multi Nozzle Printing

We have developed the DMP 3D printing system ourselves, and DMP stands for Dual Material Printing or Duplication & Mirror Printing. It can move 7-axis at the same time and has the firmware collision avoidance function of running two nozzles efficiently. Our self-developed TENLOG® Multi Nozzle 3D Printer Motherboard has a 7-axis motion control system. The Tenlog motherboard can work for 500 hours without interruption. The motherboard firmware is based on marlin 1.0.x and is open source. You can buy it to make a spare part for Tenlog Dual Extruder 3D Printer.

Full Color Touch Screen for Tenlog Dual Extruder 3D Printer

4.3-inch full color touch screen

0.2mm Right Tenlog Dual Extruder 3D Printer Nozzle Kits P2

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.2mm

Tenlog 3D Printer Double Head Extruder & Nozzle Kits with Extrusion Motor Support Rapid Disassembly to Replace Nozzle Kits

Tenlog 3D Printer Double Head EXtruder & Nozzle Kits, also called Tenlog Quick Disassembly Replacement Nozzle Kits. Each kits requires only 4 screws to replace the entire nozzle and extruder kits.

Tenlog 3D Printer Photoelectric Sensors Positioning Accuracy up to 0.025mm

All Tenlog Double Extrusion 3D Printers use high precision 3D printer sensors, the Photoelectric Sensors.

Tenlog Dual Extruder 3D Printer Mechanical Micro Switch(Limit Switch)

This is Y-axis Stoper, Y-axis just go to zero at the begin of the printing.

Tenlog 3D Printer Ball Slide for Dual Extruder 3D Printer

The ball slides slide smoothly and have a long service life and easy maintenance. Only regular grease or lubricant is required.

0.2mm Left Tenlog Dual Extruder 3D Printer Nozzle Kits P1

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.2mm

Tenlog 3D Printer Nozzles 0.2mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm

Here you can find 3D printer nozzles of all types and sizes. When you place an order, buy more nozzles, no longer worry about nozzle clogging, no need to spend time cleaning the nozzle.

Tenlog 3D Printer Hot Bed 24V MAX Temperature 80℃

Its working voltage is 24V and the maximum temperature is 80 degrees.

Tenlog Dual Extruder 3D Printer Cooling Fan Used for Cool Printed Object Dissipate Heat and Motherboard

The normal fan on the left is used to cool the heat sink in the nozzle kit. The turbofan on the right provides more airflow for cooling printed objects and reducing the cooling time of the filaments.

MW Power for Tenlog Dual Extruder 3D Printer Peak Power 350W

Input Voltage Range 110-120V ~/6.8A 200-240V ~/3.4A 50/60Hz Output 24V ⎓ 14.6A

Assembly and Maintenance Tools for Tenlog Dual Extruder 3D Printer

There are 2 toolboxes in each package for you to install and maintain the Tenlog 3D Printer.

0.4mm Left Tenlog Dual Extruder 3D Printer Nozzle Kits P1

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.4mm

0.4mm Right Tenlog Dual Extruder 3D Printer Nozzle Kits P2

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.4mm

0.5mm Left Tenlog Dual Extruder 3D Printer Nozzle Kits P1

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.5mm

0.6mm Left Tenlog Dual Extruder 3D Printer Nozzle Kits P1

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.6mm

0.8mm Left Tenlog Dual Extruder 3D Printer Nozzle Kits P1

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.8mm

3D Print Multiple Colors Objects Printed by Tenlog Multiple Colors 3D Printer

Tenlog Multiple Colors 3D Printer work fine for 3D Print Multiple Colors Objects, its 2 nozzles can be set separately, It supports the printing of water soluble or other dissolved materials, and the support can be easily removed. You only need to focus on the design model itself.

Tenlog Dual Hotend for Dual Extruder DMP 3D Printer Support Intelligent Leveling

The Dual Hotend is designed and made by Tenlog, provides an intelligent leveling solution for dual nozzles 3D Printer. Support Tenlog Smart DMP 3D Printing System.

Tenlog Independent Dual Extruder Kit with 15Pin All in One Connector and Holder

Integrated extruder, heating module, cooling module, throat, temperature sensor, wire sensor, one nozzle fan, one print cooling fan……

TENLOG DMP 7-axis Motherboard with Full Color Touch LCD

TENLOG DMP 7-axis Motherboard with Full Color Touch LCD Input Power 24V Used for Independent Dual Extruder 3D Printer Full Color Screen with Newest UI

TMC2208 Driver for Tenlog Independent Dual Extruder 3D Printer

TMC2208 Driver, Work quieter and more stable. Every Tenlog DMP 3D Printer need 7 pcs TMC2208 Driver. You can buy from us, or get from your local. Our motherboard support TMC2208 Driver, but need to change the wiring method of the motor.

Independent Dual Extruder 3D Pritner Motherboard with TMC2208 Driver & Touch Screen

DMP Motherboard with TMC2208 Driver, Work quieter and more stable. Every Tenlog DMP Motherboard need 7 pcs TMC2208 Driver. This motherboard is pre-installed with 7pcs TMC2208 drivers, and with our newest Smart DMP 3D Printing Firmware.

Tenlog DIY DLP 3D Printer Designed for Jewelry and Dentistry Made for Digital Light Processing 3D Printing

Tenlog DLP 3D Printer is specially designed for jewellery and dentistry. Its precision of the molded object is as low as 0.02mm. DMD's chip, projection system life is more than 50,000 hours. Our DLP 3D Printer is available in 3 forming volumes

Tenlog TL-D3S Dual Nozzle 3D Printer Building Volume 300mm300mm*400mm

(Stop Production)Our TL-D3S Dual Nozzle 3D Printer is upgraded from a single-nozzle 3D Printer Kit with a building volume of 300mm*300mm*400mm, which is not reduced but doubles in printing efficiency. It is a pre-assembled 3D Printer Kits that can be easily assembled in less than 5 minutes. It supports Double-Color printing mode, the parameters of the double nozzles can be set separately, such as Temperature, Extruder Speed, Printing Speed, and Infill Density. Even you can use two nozzles of different diameters at the same time. Give you more free DIY space.

Tenlog TL-D3 Pro Independent Dual Extruder DMP 3D Printer with Touch Screen Support PVA TPU ABS PLA

Our TL-D3 Pro Dual Extruder 3D Printer has Double Nozzles that are independent of each other, allowing it to be printed in Duplication and Mirror mode. You can also choose double different colors or materials to create at the same time. or print soluble support(such as PVA) to precisely implement models that are difficult to lay down. Thanks to the new DMP3d printing system, TL-D3 Pro gives you better creative space and double productivity!

Tenlog TL-D5 Big Dual Filament 3D Printer Building Volume 500mm500mm*500mm

The Tenlog TL-D5 Dual Filament 3D Printer brings a large building volume 500*mm*500mm*500mm, giving you more creative space. It has 2 Z-axis metal supporting rod to reduce a lot of sway and make the printing platform more stable during printing.

Tenlog TL-D6 Best Dual Extruder 3D Printer Large Format 600mm600mm*600mm

Tenlog TL-D6 Best Dual Extruder 3D Printer It reaches the maximum limit of the frame printer. Super Large Format building volume is 600*mm*600mm*600mm. It has 2 Z-axis metal levers to reduce a lot of sway and make the printing platform more stable during printing. Compared with the all-metal double nozzle, it brings a super low price. It is a cheap double-nozzle large printer but it runs stably and the printing object has high precision.

Tenlog Hands 2B Multi Color 3D Printer Dual Color Black and Silver for Choice

Hands 2 Never Lose Hand, Powerful for Your Creation! The Really Multi Color 3D Printer! Printing good Multi Color objects with multi-color body for your choice. All in One Connector, collect all interfaces of extruder, hot end, temperature sensor, two fans, and break sensor. Extruder & Nozzles Kits is designed for quick disassembly and installation, very easy to change.

Company profile

All products