Topstar Technology Industrial Co., Ltd.-sfyh.com

Finisar FTLF3436W4BTxx 25GE LR/eCPRI CWDM SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF3436W4BTxx SFP+ optical transceivers are designed for use in Ethernet/eCPRI/CPRI links up to 25.78 Gb/s data rate and up to 10km link length. They are compliant to SFF-8472 Rev 12.2, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 3.0. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8536P4PCL 25GE SR Short Wavelength SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8536P4PCL SFP+ optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8536P4PCV 25GE SR/10GE SR Lite eCPRI Short Wavelength SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8536P4PCV SFP+ optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8536P4BNL 25GE SR LC 850nm 100m SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF8536P4BNL SFP28 optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8536W4BTV 25GE SR/eCPRI LC 100m SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF8536W4BTV SFP+ optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8536P4BCL 25GE SR LC 100m SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF8536P4BCL SFP+ optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF1436W4BTV 25GE LR/eCPRI Long Wavelength SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF1436W4BTV SFP+ optical transceivers are designed for use in Ethernet/eCPRI/CPRI links up to 25.78 Gb/s data rate and up to 10km link length. They are compliant to SFF-8472 Rev 12.2, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 3.0. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8538P4BCL 25GE Low Latency SR SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF8538P4BCL SFP28 optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to IEEE802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8540P4BCL 25GE SR/eSR Extended Short Wavelength SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF8540P4BCL SFP28 optical transceivers are designed for use in 25 Gb/s data rate over multimode fiber. They are compliant to SFF-8472 Rev 12.1 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Hot-pluggable Finisar FTLF1436P3BCL 25GE LR 10km SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF1436P3BCL SFP28 optical transceivers are designed for use in Ethernet links up to 25.78 Gb/s data rate and up to 10 km link length. They are compliant with SFF-8472 Rev 12.2 and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 3.0. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisal FTLF8532P4BCV 32G Fibre Channel (32GFC) Short-Wavelength SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF8532P4BCV SFP28 optical transceivers are designed for use in Fibre Channel links up to 28.05 Gb/s data rate over multimode fiber. They are compliant with FC-PI-6, SFF-8472 Rev 12.2, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisar FTLF8532P4BNV 32G Fibre Channel (32GFC) Short-Wavelength Extended Temperature SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF8532P4BNV SFP28 optical transceivers are designed for use in Fibre Channel links up to 28.05 Gb/s data rate over multimode fiber. They are compliant with FC-PI-6, SFF-8472 Rev 12.2, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisal FTLF1432P3BCV 32G Fibre Channel (32GFC) Long Wavelength 10km SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF1432P3BCV SFP28 optical transceivers are designed for use in Fibre Channel links up to 28.05 Gb/s data rate and up to 10 km link length. They are compliant with FC-PI-6 and SFF-8472 Rev 12.1 and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Finisal FTLF1432P3BCE 32G Fibre Channel (32GFC) 25km SFP28 Optical Transceiver

Form Factor: SFP28 Finisar's FTLF1432P3BCE SFP28 optical transceivers are designed for use in Fibre Channel links up to 28.05 Gb/s data rate and up to 25km link length. They are compliant with SFF-8472 Rev 12.1 and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details.

Finisal FTLF8529P4BCV 16G Fibre Channel (16GFC) 100m SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8529P4BxV SFP+ transceivers are designed for use in Fibre Channel links up to 14.025 Gb/s data rate over multimode fiber. They are compliant with FC-PI-5 Rev. 6.00, SFF-8472 Rev 11.0 and SFF-8081, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See Finisar Application Note AN-2038 for more details. BUY NOW

Finsar FTLF8529P4BNV 16G Fibre Channel (16GFC) 100m Extended Temperature SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF1429P3BCV SFP+ transceivers are designed for use in Fibre Channel links up to 14.025 Gb/s data rate and up to 10 km link length. They are compliant with FC-PI-5 Rev. 6.10 and SFF-8472 Rev 11 and SFF-8081. They are compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceivers are compliant per RoHS Directive 2011/65/EU.

Finisal FTLF1429P3BNV 16G Fibre Channel (16GFC) 10km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF1429P3BNV SFP+ transceivers are designed for use in Fibre Channel links up to 14.025 Gb/s data rate and up to 10 km length. They are compliant with FC-PI-5 Rev. 6.10 and SFF-8472 Rev 11.0 and SFF-8081. They are compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceivers are compliant per the RoHS Directive 2011/65/EU.

Finisal FTLF1429P3BCE 16G Fibre Channel (16GFC) 25km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF1429P3BCE SFP+ optical transceivers are designed for use in Fibre Channel links up to 14.025 Gb/s data rate and up to 25 km length. They are compliant with FC-PI-5 Rev. 6.10 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 3.0. The optical transceivers are compliant per the RoHS Directive 2011/65/EU.

Finisal FTLF8528P3BCV 8G Fibre Channel (8GFC) 150m SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8528P3BxV SFP+ transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. They are compliant with FC-PI-4 Rev. 8.00 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLF8528P3BNV 8G Fibre Channel (8GFC) 150m Extended Temperature SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF8528P3BNV SFP+ transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. They are compliant with FC-PI-4 Rev. 8.00 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisal FTLF1428P3BNV 8G Fibre Channel (8GFC) 10km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLF1428P3BNV SFP+ optical transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate and up to 10 km link length. They are compliant with FCPI-4 Rev. 7.00 and SFF-8472 Rev 10.1, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 1.3. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX8574D3BCL 10GBASE-SR/SW 400m Multimode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX8574D3BCL 10Gb/s SFP+ optical transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8574D3BCL is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisal FTLX8574D3BCV 10G/1G Dual Rate (10GBASE-SR and 1000BASE-SX) 400m Multimode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX8574D3BCV 1G/10G Dual-Rate SFP+ optical transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, IEEE 802.3-2012 10GBASE-SR/SW and 1000BASE-SX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8574D3BCV is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperability with an SFP+ limiting module. This product is for applications specifically designed for 10G SFP+ ports and 1G/10GSFP+ ports and not native 1G SFP ports. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX8574D3BNL 10GBASE-SR/SW 400m SFP+ Extended Temperature Optical Transceiver

Form Factor: SFP+ Finisar's FTLX8574D3BNL Extended Temperature 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3-2012 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8574D3BCL is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Finisar FTLX8573D3BTL 10GBASE-SR 400m Industrial Temperature SFP+ Optical Transceiver

Form Factor: SFP+ Finisar’s FTLX8573D3BTL Industrial Temperature 10Gb/s SFP+ optical transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, SFF-8432, IEEE 802.3ae 10GBASE-SR/SW and 10G Fibre Channel 1200-Mx-SN-I. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8573D3BTL is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX1371D3BCL 10GBASE-LRM 220m SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1371D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 220m over Multi Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3 aq 10GBASE-LRM. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1371D3BCL is a "linear module" i.e. it employs a linear receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host board EDC PHY with a linear receiver SFP+ module. The transceiver is RoHS compliant and lead-free per Directive 2011/65/EU,

Finisar FTLX1370W4BTL 10G CPRI Wireless 1.4km Industrial Temperature SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1370W4BTL SFP+ transceivers are designed for use in Wireless basestation links up to 1.4 km at up to 9.8304 Gb/s data rates for CPRI, OBSAI, LTE, or other Wireless applications. They are compliant with SFF-8431, SFF-8432, SFF-8472 Rev 10.2, CPRI Rev 5.0 and OBSAI Rev V4.2. The transceiver is RoHS-6 compliant per Directive 2011/65/EU.

Finisar FTLX1475D3BCL 10Gb/s 10km 1310nm Single Mode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1475D3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ optical transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1475D3BCL employs a limiting receiver. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX1475D3BNV 10G/1G Dual Rate (10GBASE-LR/LW and 1000BASE-LX) 10km 1310nm Extended Temp Single Mode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1475D3BNV 10G Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1475D3BNV employs a limiting receiver. The transceiver is RoHS compliant per Directive 2011/65/EU.

Finisar FTLX1475D3BCV 10G/1G Dual Rate (10GBASE-LR/LW and 1000BASE-LX) 10km 1310nm Single Mode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1475D3BCV 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links up to 10km over Single Mode Fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1475D3BCV employs a limiting receiver. The transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX1475D3BTL 10G 10km 1310nm Industrial Temperature Single Mode Datacom SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1475D3BTL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L, and can support CPRI options 7 (9.83Gb/s) and 8 (10.137Gb/s) over 10km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX1475D3BTL uses a limiting electrical interface receiver.

Finisar FTLX1472M3BxL 10GBASE-LR/OC-192 SR-1 Multirate 10km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1472M3BxL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit, multi-rate links up to 10km over G.652 single mode fiber. These transceivers are equipped with internal transmitter and receiver retimers (Clocks and Data Recover or CDR) to comply to SONET/SDH jitter requirements and to enhance host cards high speed data-signal integrity. They are compliant with SFF-8431, SFF-8432, ITU-T G.693 VSR2000-2R1, SDH I-64.1 and OTN P1I1-2D1 (up to 2km), IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L (up to 10km). Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. Thes optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Finisar FTLX1672D3BCL 10GBASE-ER 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672D3BCL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and 10GBASE-ER, and support 10G Fibre Channel, as well as CPRI option 2 through 8, over 40km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Finisar FTLX1672D3BNL 10GBASE-ER/EW 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672D3BNL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and 10GBASE-ER/EW; support 4x, 8x, and 10x Fibre Channel, as well as CPRI option 2 through 8, over 40km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Finisar FTLX1672D3BTL 10GBASE-ER 40km SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX1672D3BTL optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and 10GBASE-ER/EW; support 4x, 8x and 10x Fibre Channel, as well as CPRI option 2 through 8, over 40km links. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is compliant per RoHS Directive 2011/65/EU.

Finisar FTLX3971DTCxx 1.2G-11.3G 40km Industrial Temperature DWDM SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX3971DTCxx optical transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in DWDM links up to 40km of G.652 single mode fiber, for multirate applications from 1.2 through 11.3 Gb/s, carrying 1G-10G Ethernet, 2x-10x Fibre Channel, 10G OTN traffic or CPRI options 2 through 8 traffic. The transceivers are compliant with SFF-8431 and SFF-8432. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is RoHS compliant per Directive 2011/65/EU.

Finisar FTLX3671DTCxx 1.2G-11.3G 40km Industrial Temperature DWDM SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX3671DTCxx optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in DWDM links up to 40km of G.652 single mode fiber, for multirate applications from 1.2 through 11.3 Gb/s, carrying 1-10G Ethernet, 2x-10x Fibre Channel, 10G OTN traffic or CPRI options 2 through 8 traffic. The transceivers are compliant with SFF-8431 and SFF-8432. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is RoHS compliant per Directive 2011/65/EU.

Finisar FTLX3971MTCxx 10G Multirate 40km Industrial Temperature DWDM SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX3971MTCxx optical transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in DWDM links up to 40km of G.652 single mode fiber, for multirate applications from 1.2 through 11.3 Gb/s, carrying 1-10G Ethernet, 1-10G Fibre Channel, 10G OTN traffic or CPRI options 2 through 8 traffic. The transceivers are compliant with SFF-8431 and SFF-8432. Finisar FTLX3971MTCxx transceivers use internal re-timers (clock and data recovery or CDR) for the transmitter and the receiver to guarantees compliance with the SONET/SDH jitter requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is RoHS compliant per Directive 2011/65/EU.

Finisar FTLX3671MTCxx 10G Multirate 40km Industrial Temperature DWDM SFP+ Optical Transceiver

Form Factor: SFP+ Finisar's FTLX3671MTCxx optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in DWDM links up to 40km of G.652 single mode fiber, for multirate applications from 1.2 through 11.3 Gb/s, carrying 1-10G Ethernet, 1-10G Fibre Channel, 10G OTN traffic or CPRI options 2 through 8 traffic. The transceivers are compliant with SFF-8431 and SFF-8432.

Finisar FTLX1672M3BCL 10GBASE-ER/OC-192 IR-2 Multirate 40km SFP+ Optical Transceiver

Product Description: Distance:40 km Data Rate (max):11.3 Gb/s Protocol:8x Fibre Channel Compliant SONET OC-192 Compliant 10x Fibre Channel Compliant 10 Gigabit Ethernet Compliant Wireless CPRI Compliant Low End Case Temperature (°C):-5 High End Case Temperature (°C):70 Diagnostics:Digital Transmitter:EML Receiver:PIN Voltage Supply:3.3 Connector:LC Wavelength:1550nm Product Feature: Hot-pluggable SFP+ footprint Supports 8.5 and 9.95 to 11.3 Gb/s 40km link length (800ps/nm) Internal transmitter/receiver CDR Low power consumption Cooled 1550nm EML laser Limiting electrical interface receiver Duplex LC connector Built-in digital diagnostic functions RoHS-6 compliant (lead-free) Case temperature range: -5°C to 70°C Products series: Topstar are one of the leading Manufacturers and Supplier of Fiber Optical transceivers in Shenzhen. Our main core business as below: Original SFP module:We are a professional supplier of original (Finisar/ Cisco/ Brocade/ Huawei/ Avago/ Source/ WTD/ JDSU/ INTEL, etc) sfp module, more than 200,000pcs inventory per month in warehouse satisfy your one-stand demand.

Company profile

All products