Topstar Technology Industrial Co., Ltd.-sfyh.com

Pluggable Transceiver 25G DWDM SFP+ 80KM optical switch ethernet module

Pluggable Transceiver 25G DWDM SFP+ 80KM optical switch ethernet module,it support DDM,Duplex LC connector. More details please check our web.https://www.opticalmodulemanufacturers.com/

TOPSTAR EDFA-WDM-BA-22 19inch DWDM 40ch BA1U Dual Power LC/UPC Erbium Doped Fiber Amplifier

Brand Name:Top-trans Model Number:EDFA-WDM-BA-22 Product name:Erbium Doped Fiber Amplifier Size:19inch Connector:LC/UPC Output Power:5~22dBm Input Power:-10~+7dBm LC/UPC Operation Temperature:-5°C~ +55°C Noise Figure Typical:<5.5dB Operating Wavelength:1527.9nm~1565.6nm Warranty:3 years

SFP Copper RJ45 Module 10/100/1000 Mbps Modules Ethernet to SFP

SFP Copper RJ45 Module is high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps Modules) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.Ethernet to SFP,The module provides standard serial ID information compliant with SFP MSA, which can be accessed with an address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

Cisco Compatible RJ45 Copper SFP Transceiver Module 10/100Base-T

Cisco Compatible RJ45 Copper SFP transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE802.3u. Copper SFP Transceiver Module supports 100Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports 10/100 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 25Mbps on each pair. The 10/100Base-T module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

Compatible Cisco SFP-GE-T 1000Base Copper Modules 1G RJ45 SFP

Compatible Cisco SFP-GE-T transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supports 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable and support CAT 6. 1000Base Copper Modules support 1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. 1G RJ45 SFP module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

10G Copper SFP Juniper EX-SFP-10GE-T Compatible 10GBASE-T SFP+ Copper RJ-45

10G Copper SFP transceivers are based on the SFP Multi-Source Agreement (MSA). Juniper EX-SFP-10GE-T Compatible is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBASE-T SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC should be reset.

Compatible Cisco SFP-10G-T-S RJ-45 10GBase Copper SFP+ Transceiver

10G RJ45 Copper SFP+ transceivers are based on the SFP Multi-Source Agreement (MSA). Copper RJ-45 Transceiver is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBase Copper SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin, PHY IC should be reset.

Copper SFP Compatible With Brocade XBR-000190 Switch 1000M RJ45 100m Fibre Optic For Brocade 7800

Copper Small Form Pluggable (SFP) transceivers is Compatible with Brocade 7800 7840.SFP 1000M RJ45 100m optical transceivers are designed for 1000Mb/s serial optical interfaces.Please read and check it.

Cisco 10G SFP SFP-10G-SR 850nm Multimode Transceiver

Cisco 10GBASE-SR Module 10GBASE-SR, 10GBASE-SW. Check datasheet, price and details on www.opticalmodulemanufacturers.com.

Original Cisco GLC-FE-100FX 100BASE-FX SFP 1310nm 2km 10-2077-01 Transceiver Module for WS-C2960S-48LPS-L

GLC-FE-100FX modules operate in Fast Ethernet or dual-rate Fast/ Gigabit Ethernet ports of Cisco switches and routers. Catalyst Express 500 - WS-CE500G-12TC Catalyst 3560 Series - WS-C3560-8PC-S Catalyst 2960 Series - WS-C2960-48TC-S 1941 Series Router HWC-1GE-SFP 2500 Connected Grid Switch Series - CGS-2520-16S-8PC 2500 Connected Grid Switch Series - CGS-2520-24TC Learn more please click our web:https://www.opticalmodulemanufacturers.com/

Cisco GLC-FE-100FX-RGD Compatible 100BASE-FX SFP 1310nm 2km 10-2360-01 DOM Transceiver Module

GLC-FE-100FX-RGD modules operate in Fast Ethernet or dual-rate Fast/Gigabit Ethernet ports of Cisco Industrial Ethernet and Smart Grid switches and routers.IE2000 Series - IE-2000-16TC-L

Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver Module for Gigabit Ethernet SFP Ports

GLC-GE-100FX modules operate in Gigabit Ethernet ports of Cisco switches and routers. ASR 9000 series Aggregation Services Router-A9k-40GE-B Catalyst 3560 Series - WS-C3560G-24PS Catalyst 2960-X Series - WS-C2960X-48LPS-L 3900 Series Integrated Services Router - SM-D-ES2-48 892F Series Wireless Integrated Services Router - CISCO892FW-K9 Catalyst 2960-S Series - WS-C2960S-48FPS-L Catalyst 3850 Series - 3850-24P-S Catalyst 3560-E Series - WS-C3560E-12D Catalyst 3850 Series - 3850-48T-E Catalyst 2960 Series - WS-C2960-48TC-S Learn more please click our web:https://www.opticalmodulemanufacturers.com/

Cisco Linksys MFEFX1 Compatible 100BASE-FX SFP 1310nm 2km DOM Transceiver Module

200 Series Smart Switch - SF200-24 500 Series Stackable Managed Switch - SG500X-48P 500 Series Stackable Managed Switch - SG500X-48 500 Series Stackable Managed Switch - SF500-48P SF200-24 Small Business 200 Series Smart Switch - SLM224GT-NA 500 Series Stackable Managed Switch - SG500X-24P Catalyst 2960-X Series Learn more please click our web:https://www.opticalmodulemanufacturers.com/

Cisco ONS-SE-100-FX Compatible 100BASE-FX SFP 1310nm 2km 10-2212-01 DOM Transceiver Module

ONS 15454 ML-SerIE2000 Series-IEs Multirate Ethernet Card- ML100-X-8 Learn more please click our web:https://www.opticalmodulemanufacturers.com/

Cisco ONS-SI-100-FX Compatible 100BASE-FX SFP 1310nm 2km 10-2350-01 DOM Transceiver Module

ONS 15454 ML-Series Multirate Ethernet Card - 15454-ML-MR-10 ONS 15454 ML-Series Multirate Ethernet Card - 15454E-ML-MR-10 Learn more please click our web:https://www.opticalmodulemanufacturers.com/

Cisco SFP-25G-SR-S Compatible 25G SFP28 850nm 100m DOM Transceiver Module

The Cisco 25GBASE-SR Module supports a link length of 70/100m on OM3/4 MMF. This module requires RS-FEC on the host ports. Learn more please click our web:https://www.opticalmodulemanufacturers.com/

Cisco SFP-25G-LR-S Compatible 25G SFP28 1310nm 10km DOM Transceiver Module

The Cisco 25GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G. This module requires RS-FEC on the host ports for operation at 25G.

Cisco QSFP-40G-SR4 Compatible 40GBASE-SR4 QSFP+ 850nm 150m 10-2072-03 Transceiver Module

The 40G SR4 supports distances compatible with 10GBASE-SR, which is 150m on multi-mode fiber. In addition the SR4 optic can support 4 individual 10G-SR connections using MTP Trunk cable and LC duplex cables for multi-mode fiber.

Cisco QSFP-40G-CSR4 Compatible 40GBASE-CSR4 QSFP+ 850nm 400m 10-2837-02 Transceiver Module

The Cisco QSFP-40G-CSR4 Compatible Cisco N9K-C9396PX,Cisco Nexus C92304QC,Cisco ASR 9000 Series (Modular Line Card : A9K-MPA-1X40GE)

Cisco WSP-Q40GLR4L Compatible 40GBASE-LR4L QSFP+ 1310nm 2km LC DOM 10-3063-02 Transceiver Module

The Cisco WSP-Q40GLR4L Transceiver Module Compatible with Cisco Nexus 9300 Series (Switch/Module : N9K-C9396PX; Uplink Module : N9K-M12PQ ), Cisco ASR 9000 Series (Modular Line Card : A9K-MPA-1X40GE)

Cisco QSFP-40G-LR4 Compatible 40GBASE-LR4 and OTU3 QSFP+ 1310nm 10km LC DOM Transceiver Module

The Cisco QSFP-40G-LR4 Transceiver Module Compatible with Cisco Nexus 9300 Series (Switch/Module : N9K-C9396PX; Uplink Module : N9K-M12PQ ), Cisco ASR 9000 Series (Modular Line Card : A9K-MPA-1X40GE). Please read it and buy it now by our web.

Cisco QSFP-40G-LR4-S Compatible 40GBASE-LR4 QSFP+ 1310nm 10km LC DOM 10-3115-01 Transceiver Module

The Cisco QSFP-40G-LR4-S Transceiver Module Compatible with Cisco Nexus 9300 Series (Switch/Module : N9K-C9396PX; Uplink Module : N9K-M12PQ ), Cisco ASR 9000 Series (Modular Line Card : A9K-MPA-1X40GE), please read it and buy it now by our web.

Cisco QSFP-40G-ER4 Compatible 40GBASE-ER4 and OTU3 QSFP+ 1310nm 40km LC DOM Transceiver Module

The Cisco QSFP-40G-ER4 Transceiver Module Compatible with Cisco N9K-C9396PX Cisco Nexus C92304QC Cisco Nexus 9000 N9K-X9564TX (uplinks), Cisco Nexus 9000 N9K-C93120TX Cisco Nexus 9000 N9K-X9736PQ. Please read it and buy it now by our web.

Cisco CFP CFP-100G-SR10 Compatible 100GBASE-SR10 850nm 150m 10-2787-02 Transceiver Module

The original switches marked “Unique” below, eg: Juniper MX960 & EX 4300 series, Cisco Nexus 9396PX & Cisco ASR 9000 Series, HP 5900 Series & HP 5406R ZL2 V3(J9996A), Arista 7050S-64, Brocade ICX7750-26Q & ICX6610-48, Avaya VSP 7000 MDA 2, etc.

Cisco CFP-100G-LR4 Compatible 100GBASE-LR4 1310nm 10km 10-2549-02 Transceiver Module

The original switches marked “Unique” below could be found in Topstar, eg: Juniper MX960 & EX 4300 series, Cisco Nexus 9396PX & Cisco ASR 9000 Series, HP 5900 Series & HP 5406R ZL2 V3(J9996A), Arista 7050S-64, Brocade ICX7750-26Q & ICX6610-48, Avaya VSP 7000 MDA 2, etc.