Textile Hairiness Tester-sfyh.com

Fabric Water-vapour Transmission Tester GT-C28

Fabric Water-vapour Transmission Tester: To test the water vapour transmision of various fabric (moisture permeable fabric included) and non-woven fabric such as bat wool, space cotton, sportswear fabric etc.

Downproof Tester (Impact Test Method) GT-C42

This Downproof Tester is used for down and/ or feather penetration through the primary tick fabric of a specimen containing feather and/or down filling.

Non-woven Thickness Gauge GT-C46-3

This thickness gauge used for measure kinds of non-woven which thickness less than 20mm.

Gas Fume Chamber GT-C49

Gas Fume Chamber is used to determine the colorfastness of of textiles of all kinds and in all forms when exposed to atmospheric oxides of nitrogen as derived from the combustion of natural gas.

Bean Bag Snag Tester GT-C50

This Bean Bag Snag Tester is to test the snagging resistance of knitted fabric.

Circular Sample Cutter GT-C75-3

Circular Fabric Sample Cutter 38mm and 140mm diameter fabric.

Automatic Textile Formaldehyde Tester GT-C76-2

This Formaldehyde Tester apply for quickly testing formaldehyde content of all kinds of textile.

Pilling Assessment Box GT-C78

Pilling Assessment Box; Suitable for all standards where the assessment of pilling on fabrics is necessary, whether against control fabrics or photographs.

Fabric Density Glass GT-C83

Fabric Density Glass is used for testing the number of yarn in warp-wise or across warp of all kinds of fabrics in set length.

Fabric Stretch and Recovery Tester GT-C181

Fabric Stretch and Recovery Tester is used for evaluation of the amount of fabric stretch, fabric growth, and fabric recovery of fabrics woven.

Dry Cleaning Cylinder GT-C36

Dry Cleaning Cylinder is used to determine color fastness to drycleaning and chlorinated pool water.

Button Snap Pull Strength Tester GT-C09

Button Snap Pull Strength Tester is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can fixed on garments suitable.

Automatic Air Permeability Tester of Textile Fabrics GT-C27

Automatic Air Permeability Tester is used to test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc

Falling-Pendulum Type Tearing Tester GT-C10B

This Elmendorf Tearing Tester GT-C10B can be used to test the Determination of tear resistance of textile, non-woven fabrics, paper, paperboard, thin film, ventilation tape, sheet metal etc.

ASTM D4151 Blanket Burning Tester GT-C200

Blanket Burning Tester is suitable for Flame retardancy of bed linings including bed sheets, blankets, mats on mattresses, pillows, duvets and similar products used to cover the bed.

Brush Pilling Tester GT-C20

ASTM D 3511 Brush Pilling Tester GT-C20 is used to determine the fabric pilling performance in simulate wearing and normal operating conditions

ISO 5981 Flex Abrasion Tester GT-C23

This ISO 5981 Flex Abrasion Tester is evaluated the resistance to combined shear flexing and rubbing of rubber or plastics-coated fabrics.

GSM Cutter for Fabric GT-C75

Circular Sample Cutter 100cm2 combine with the electronic balance. Suitable for 100 cm2*5mm depth of cut, provided with the cutting mat and the spare blades.