children products test equipment-sfyh.com

Automatic Corrugated Fibreboard Bursting Strength Tester A001

A001Automatic Corrugated Fibreboard Bursting Strength Tester is used to test the bursting resistance strength property for corrugated fibreboard, corrugated case. Applicable for paperboard production enterprises, carton production enterprises, cartons use enterprises, scientific research institutions, etc.

COBB Cobb Absorption Tester A003A

To determine the water absorptiveness of sized paper and board, including corrugated fiberboard, under standard conditions. It may not suitable for paper of grammage less than 50g/m2 or embossed paper. It is not suitable for porous papers such as newsprint or unsized papers such as blotting paper or other papers having a relatively high water absorptivenss for which ISO 8787 is more suitable. This instrument is only capable of testing surface water absorption of paper and board. It is not applicable to exactly evaluate the writing performance of paper and board.

COBB Absorption Cutter A003B

This device is a necessary sampler of absorption test, it is an ideal test apparatus of the corrugated board and carton production, research and quality supervision, inspection and other departments. It is suitable for short fiber thinner paper sampling.

Paper Thickness Tester A007B

Paper thickness tester is to test thickness of paper and board, test films, mica plate, etc .

Paper Ash Tester A008

To determine the ash content of the material.

Paper and Board Folding Tester A010

Paper folding tester is used to test folding time of paper, it can also be used to test other materails that need to have endure folding function, such as case board, craft paper, paperboard, corrugated paper grey paper.

Slice Materials Air Permeability Tester( Schopper method ) A013

Air permeance tester is used to test air permeance performance of all kinds of slice materials, such as textiles, films, paper, nonwowens, filter materials ,and so on. this tester is control by single chip microcomputer, and can automatic work, is an advanced equipment for paper industry, textiles industry, and leader industry.

Paper Tensile Strength Tester A014B

To determine tensile strength, peel strength, deformation rate, tear strength, puncture power, heat seal strength, low unwind force and other performance for paper, plastic films, bag, plastic products,laminated films and other sticky materials. Electric power tensile tester can be customized based on different test grips to meet various tension and compression tests. Rally stepless unique features to meet the speed requirements for different tests.

Crush Tester A015

Crush tester is designed to test Ring Crush Test (RCT), Edge Crush Test (ECT). Flat Crush Test (FCT), Pin Adhesion Test(PAT) and Concora Medium Test(CMT). It’s a basic equipment to test the crushing strength for various papers, including corrugated board, tubes, paper and plastics.

Needle Flame Tester TF02

Needle flame tester is made based on standards IEC60695, GB5169. Mainly used to simulate products internal generates small flame under the breakdown situation, and assess its ignition hazard. Applicable for testing flammability of electronic electrical equipment and its components and elements, solid electrical insulation or other combustible materials. Needle flame test method can be used for the situation when small parts or component are not suitable to do glow wire test or horizontal vertical combustion test method.

Horizontal Thrust Tester UTS-TS01

To assess the stability property for activity toys(such as climbing rack, swing, etc) with a free height of fall of 600 mm or less.

Guardrails And Armrest Dynamic Strength Tester TS02

To determine the dynamic strength for barriers and handrails.

Simulation Head Tester TS03

Test for head and neck entrapment.

Probe V TS04

Test template D for assessment of head and neck entrapment in partially bound and V-shaped openings

Swing Suspension Connector Durability Tester TS11

Durability test for suspension connectors and means of suspension.

Glow Wire Tester TF01

Glow wire tester is to assess the fire hazard affected by thermal stress which is generated from the heat source of glow-wire component or overload resistance within short time. Widely applicable for testing fire hazard test for electrical and electronic products, household appliances and their materials, also non-flame ignition test, so as to determine the related materials’ glow wire ignition temperature, flammability and flammability index.

Steel Ball Impact Tester T028

Steel ball impact tester is to test the impact resistance for all rigid toys which cover face including space helmets, goggles or face shields. Based on standard requirements, after testing, toys shall not produce sharp edges, sharp points or loose parts which could enter eyes. If so, then conduct follow tests via sharp edge tester, sharp point tester and small part cylinder.

Impact Hammer T062

Impact test hammer is used to check the mechanical shock resistance of enclosures(appliances shell) for electrical appliances of other electronic products. If damage occurs from the spring operated impact test. The spring operated impact test hammer simulates the mechanical impact to which electrical equipment may be subjected. This impact test hammer is mainly used to test household and similar electrical appliances shell, lever, handle, knobs, lights and other shell to withstand mechanical shocks.The impact tester made of stainless steel or alloy.

Surface Flash Tester T013

To determine the flammability property for fluff or fur fabrics (except floor coverings).

Horizontal and Vertical Flammability Tester TF03

Horizontal and vertical flammability tester is applicable to solid and celluar materials that have an apparent density of not less than 250kg/m3, determined in accordance with ISO 845. And plastic materials used in consumer electric devices and appliances.