D&S Automatic Co.,Ltd.-sfyh.com

Teflon Tape Machine

Automatic Double-screw Teflon Tape Machine Putting the ptfe powder with kerosene into Automatic Mixing Materials Machine, making even. Blender Mamchine Funcation: mix the material. Putting the Teflon tape raw material with kerosene into Automatic Mixing Materials Machine, making even.

Ptfe Powder Heating Oven

Ptfe Powder Heating Oven After mixing the ptfe powder, put into glass bottle, and put into oven for heating material, set 60-70 degree for 10 hours.

Automatic Vertical Extruder Ptfe Machine

Extruder Machine Ptfe ---- Ptfe Extruder After put into left side, and making as strip model. And these strip should put into Water bucket( aim to adjust the temperature, heat preservation), the temperature of water bucket should keep in the 60-70 degree.

Seal Tape Calender Mangler Machine

Calender machine Moving the Water bucket which including the Teflon tape strip into Mangler (Chain Rubber Machine）,then making half-finished product. ( big roll)

Ptfe Tape Cutting Machine

Ptfe Tape Cutting Slitting Machine It is automatic cutting the tape big roll into small roll . After the calender machine, making into big roll, then p ut the half –finished product into cutting machine.

Automatic PTFE Tape Pad Printing Machine

Automatic PTFE Tape Pad Printing Machine It's automatic feeding, printing, drying, uploading, and automatic cheeking.PLC, touch screen

Hot & Cold Pressured Water Testing Machine

Hot & Cold Pressured Water Testing Machine This equipment providing hot and cold pressured water to test life cycle of plumbing fittings such as shower heads ,hand-held showers and ball joint.

Fire Hose Abrasion Resistance Tester

Fire Hose Abrasion Resistance Tester The Equipment is used for the abrasion resistance test of the fire hose

Fire Rotary Joint Seal & Strength Tester

Fire Rotary Joint Seal & Strength Tester The Equipment is used for hyraulic seal and strength test of the fire rotary joint.

Tap Valves Life Cycle Tester

Tap Valves Life Cycle Tester The equipment providing hot and cold pressured water to test life cycle of plumbing fittings such as quick or slow tap valve,swing spout diverters and valves with single hand and controls.

Water Tank Fittings Flow and Seal Tester

Water Block Accessories Flux and Seal Testing Machine The Device is used to test inlet valvae flow rate,static/dynamic pressure seal,re-open function,resistance to water pressure,drainage valve flow rate,seal,water capacity,residual water level,driving force.

Seals and Burst Pressure Tester

Seals and Burst Pressure Tester This Device is used to test the faucets,horses,spray gun,valves and other plumbing products,hydrostatic pressure seal strength properties.

Salt Spray Test Machine

Salt Spray Test Machine has a standardized test method to check corrosion resistence of coated samples. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish.

Automatic sand core shooting machine

Automatic core shooting machine,Two shooting head. one time can making two sand core.Die Close cylinder forward die close core drawing forward,core box forward, sand feeding valve off, core shooting, sand feeding valve on, air-out, core box backward,consolidation, core drawing backward,die open，unload the sand core, clean dies

Aluminum Alloy Casting Machine

Aluminum Alloy casting machine The clamp frame use casted grey iron, will not deformation after heating.The clamp is controlled by dig hydraulic cylinder, with big mould clamping force.control by computer, precisely controlling each casting .

Faucets Assembling & Gas Testing Machine

Faucets Assembling & Gas Testing Machine PT-320 The assembly line is a semi-automatic system to control the process such as assembling,testing,packaging.The manpower is saved and the efficiency of working is increased substantially byoptimization of process.The high-performance clamping and testing devices can ensure the accuracy , convenient, efficient and high-quality in the assembly process.

Pipeline Faucet Assembling and Gas Testing Machine

Pipeline Faucet Assembling and Gas Testing Machine PT-320A assembly machine for ball valves,valve making machine

Metal Faucet Production Automation Assembly Line PT-360A

Metal Faucet Production Automation Assembly Line PT-360A Fully automated assembly production.High efficiency, stable performance.After the completion of the assembly automatically detect, remove bad products.According to different products to adjust the applicability of specifications.

Faucets Assembling Machine

Faucets Assembling Machine PT-360 The assembly line is a semi-automatic system to control the process such as assembling,testing,packaging.The manpower is saved and the efficiency of working is increased substantially byoptimization of process.The high-performance clamping and testing devices can ensure the accuracy , convenient, efficient and high-quality in the assembly process.

Automatic Faucet Spure Removing Machine

Automatic Faucet Sprue Removing Machine One touch operation,one worker can take care of many machines.It's stable and safety,hydraulic powered and the work piece is laying horizontally,no need manual unloading in clamping.

Automatic Faucet Grinding Machine

Automatic Faucet Grinding Machine The machine tool castings are made of high tension MIHANA cast iron,and after two manual aging treatment,the stability is good,the strength is high,the accuracy is stable and reliable.

Portable Abrasive Sand Blasting Machine

Sand Blasting Machine is good for removing the raw material from working pieces. widely used in faucet , valve , brass fitting, etc . after process by this machine, then products surface is look nice and better .

Two Shaft Machine for Faucets

ZS4132X2 Two Shaft Machine , We supply manual and automatic two spindle/shaft machine. Drilling and tapping . easy operate , and high working efficiency. Saving workers, and saving cost. Can process faucet, watermeter, valve, and other brass fittings, etc.

Double shaft machine for water meter

ZS4150X2 Two Shaft Machine , We supply manual and automatic two spindle/shaft machine. Drilling and tapping . easy operate , and high working efficiency. Saving workers, and saving cost. Can process faucet, watermeter, valve, and other brass fittings, etc.

Gas Drilling Machine

Gas Drilling Tapping Mailling Machine Mould Milling Machine Small Machining Center High rigidity it adopts the structure of bed and body processing center the machine tools composed of base

Multi-station Punching Machine

Brass Valve Punching Machine,Multi-station Punching Machine Precision ball screw, Bearings.Optional cnc controller system.Optional accessories, like Hydraulic chuck.R&D team, provide OEM design and services.

Movable Table High Speed Engraving Mill Machine

Movable Table High Speed Engraving Mill The main shaft of the machine tool is the intemal high speed electric spindle(3.0000RPM) Which can reach up to 30 meters per minute high efficiency economical processing time and good economic beneffit

Gas Drilling Tapping Milling Machine

Gas Drilling Tapping Milling Machine Carving Drill Milling Machine Small Machining Center The machine adopts high strength resin sand casting the wide guide base of the processing center the screw rod adopts 3210/4010 double nut ball screw ac servo motor drives.

Automatic Two Shaft Machine for Faucets

ZSK132X2 Automatic Two Shaft Machine , We supply automatic two spindle/shaft machine. Drilling and tapping . easy operate , and high working efficiency. Saving workers, and saving cost. Can process faucet, watermeter, valve, and other brass fittings, etc.

Automatic Brass Watermeter Machine

ZSK150X2 Automatic Two Shaft Machine , We supply automatic two spindle/shaft machine. Drilling and tapping . easy operate , and high working efficiency. Saving workers, and saving cost. Can process faucet, watermeter, valve, and other brass fittings, etc.

Manual Double Shaft Drilling&Tapping Compound Machine

ZS4180X2 Manual Double Shaft Drilling& Tapping Compound Machine, We supply manual two spindle/shaft machine. Drilling and tapping . easy operate , and high working efficiency. Saving workers, and saving cost. Can process faucet, watermeter, valve, and other brass fittings, etc.

Brass gravity die casting machine

Brass Gravity Die Casting Machine which is easy opeation, solved the problem that big moulds that workers could not move it, it is au tomatic made by machine.

Automatic core shooting machine

Automatic core shooting machine which is easy operate, working fast, and high quality of core . saving workers and increase the production capacity.

Automatic Core Shooter

Automatic core shooting machine which is easy operate, working fast, and high quality of core . saving workers and increase the production capacity.

Automatic Double Core Shooter Machine

Automatic double core shooting machine with nylon conveyer belt which is easy to operate, working fast, and high quality of core . saving workers and incrase the production capacity. It has been widely used in ferrous metal casting:valve,fire pump,auto parts,plumbing,sanitary ware.

Automatic Assembly Machine

Automatic Assembly Machine Valve assembly machine mainly by machine instead of manualoperation ,one operator can replace ten operaters'capacity.

Automatic Hex Lathe Machine

Automatic hex lathe Specifical process hex, Can 2,4,6,8,12 equilateral, one-time milling automatic feeding device. This machine is suitable for small products. Processing of copper, iron, aluminum etc all kinds of metal materials. May 1 to 6-8 machine, greatly reduce the manpower. Is the product of mass production hex etc.

Company profile

All products