Factory Supply digital peripherals ,All Kinds Of Electronic Products

HDRiG Coiled D-Tap to Convergent Design Odyssey 7Q Power Cable

D-Tap to Odyssey allows you to power the Convergent Design Odyssey7, 7Q and 7Q+ recorder using any V-Mount or Gold Mount battery with a D-Tap plug.

HDRiG D-Tap to DC Power Cable for Sony PXW-FS7 and FS7 II

D-Tap to DC Unregulated Power Cable for Sony PXW-FS7 Camera allows you to power the FS7 and FS7 Mark II off of a V-Mount or Gold Mount battery that has a D-Tap port.

HDRiG XLR M to XLR F Professional Microphone Cable

The XLR M to XLR F Professional Microphone Cable is a studio-quality cable for connecting mics to mixers, preamps, audio interfaces and recorders.

HDRiG BNC to 0B 5Pin Push-pull Connector Timecode Cable for Alexa Mini

This is a timecode cable feature a standard BNC connector and a 0B 5-pin push-pull connector.

HDRiG Right-angle BNC to 3.5mm Mini Jack Timecode Cable

This cable is used to feed or accept a timecode signal between a Tentacle Sync timecode generator and a device with a BNC TC in/out port.

HDRiG 3.5mm Mini Jack to RED Timecode Cable

This cable is used to feed a timecode signal from a Tentacle Sync timecode generator to a RED camera (except RED One).

HDRiG 4Pin XLR Male to Female Power Cable

This 4Pin XLR Male to Female Power Cable is a 4-pin XLR male to 4-pin XLR female cable for connecting any 4-pin XLR output to input.

HDRiG 4Pin XLR Male to 2.5mm DC Plug Power Cable

This cable features a 4-pin male XLR at one end and a 2.5mm plug on the other and able to power your Blackmagic Design cameras from select batteries, battery plates, and other devices.

HDRiG Right-angle BNC to RED Timecode Cable for RED Camera

The Right-angle BNC to RED Timecode Cable from HDRiG for RED Camera is used to feed a timecode signal from a timecode generator with a BNC TC in/out port to a RED camera (except RED One).

HDRiG 3.5mm TRS to 5Pin Power Cable for ARRI ALEXA Mini Camera

The cable features a right-angle 3.5mm TRS mini plug with gold-plated contacts and a right-angle 5-pin push-pull connector, for ARRI ALEXA Mini audio input / output.

HDRiG Universal HDMI Cable Clamp Wire Holder Protector

The HDRiG HDMI Cable Clamp features small size and adjustable opening, which enables it to universally accommodate various camera HDMI cables without limits.

HDRiG Cable Clamp For Universal DSLR Camera Cage

This is a HDMI cable protecting clamp suitable for universal camera cages and protects the wireless HDMI transmitter connections from being bumped or broken.

HDRiG Samsung T5 SSD Holder With Adjustable HDMI Cable Micro Clamp Protector

The HDRiG Holder Clamp is exclusively applied to SAMSUNG SSD T5.

HDRiG Samsung T5 SSD Mount Bracket SSD Holder Clamp For BMPCC 4K Cage Kit

This clamp is exclusively applied to Samsung SSD T5, exactly formfitting and fastened by a knob at end, very easy and handy to use.

HDRiG 1 to 3 Power Splitter D-TAP To 2 Pin Coiled Power Cable

1 to 3 Power Splitter cable splits one male D-Tap to three female 2pin LEMOs.

HDRiG NP-W126S Dummy Battery to 2.1mm DC Cable

This NP-W126S Dummy Battery can be used to power Fujifilm cameras (X-H1, X-T3, X-T2, X-T1, X-T30, X-T100, etc) with a V-mount battery.

HDRiG Sony NP-FZ100 Dummy Battery to 2.1mm DC Cable

This NP-FZ100 Dummy Battery can be used to power Sony cameras (A9, A7R III, A7 III, A7R IV, A6600, A9 II, etc) with a V-mount battery.

HDRiG Sony NP-FW50 Dummy Battery to 2.1mm DC Cable

This NP-FW50 Dummy Battery can be used to power Sony cameras (RX10IV, A6300, A6500, A6400, A7 II, A7R II, A7S II, etc) with a V-mount battery.

HDRiG Canon LP-E17 Dummy Battery to 2.1mm DC Cable

This LP-E17 Dummy Battery can be used to power Canon cameras (EOS M6, M100, Rebel SL2, Rebel SL3, Rebel T6i, Rebel T7i, etc) with a V-mount battery.

HDRiG Nikon EN-EL15 Dummy Battery to 2.1mm DC Cable

This EN-EL15 Dummy Battery can be used to power Nikon cameras (Z 7, Z 6, D850, D810, D750, D610, D500, D7500, etc) with a V-mount battery.

HDRiG Panasonic DMW-BLF19 Dummy Battery to 2.1mm DC Cable

This DMW-BLF19 Dummy Battery can be used to power Panasonic cameras(GH3, GH4, GH5, G5HS, G9, etc) with a V-mount battery.

HDRiG Nikon EN-EL14 Dummy Battery to 2.1mm DC Cable

This EN-EL14 Dummy Battery can be used to power Nikon cameras (Df, D5600, D5500, D5300, D3500, D3400, D3300, etc) with a V-mount battery.

HDRiG Micro To Type-A HDMI Cable Straight Style

This micro HDMI to full HDMI cable transmits HDMI signals between devices and components.

HDRiG 7 inch Articulating Magic Arm

This articulating arm works with HDRiG kits to offer adjustable equipment installation on camera.

HDRiG 11 inch Articulating Arm

This is a professional 11-inch articulating arm perfect for LED light, LCD monitor or flashlight and others.

HDRiG 9 inch Articulating Magic Arm With Shoe Mount

The HDRiG 9" Articulating Magic Arm is used to mount small displays on prosumer and professional camcorders and it comes with a shoe mount on one end for accessories.

HDRiG Ultra Articulating Arm With Ball Heads And 1/4 Screw Mounts

This magic arm is generally used to attach accessories to the cage, such as monitor, light, audio recorder and so on, and plate that features 1/4"-20 threaded holes.

HDRiG Articulating Magic Arm With Double Ball Head For DSLR Camera Accessories

This articulating magic arm is generally used to support accessories to the camera cage, such as monitor, light, audio recorder and so on, and plate that comes with 1/4"-20 threaded holes.

HDRiG Hot Shoe Mount With Rotating Multifunctional Double Ball Heads

The multifunctional ball head feature a hot shoe mount can be connected to the camera directly or other accessories with 1/4"-20 screw thread.

HDRiG Multi-purpose 11 Inch Articulating Magic Arm

The Articulating Arm is a flexible arm that supports 2kg for attaching and positioning available accessories to your camera or accessory mounting point.