Full Series Mechanic on sfyh.com

330104-00-12-10-02-00 | Bently Nevada | Proximity Transducer System

The 3300 XL’s SpringLoc terminal strips require no special installation tools and facilitate faster

Bently Nevada 330130-045-01-00 extension cable

The 3300 XL probe, extension cable, and Proximitor sensor have corrosion-resistant, gold-plated ClickLoc* connectors.

Bently Nevada 330103-00-05-05-02-00 extension cable

Accepts one noncontacting 3300-series 5 mm, 3300 8 mm or 3300 XL 8 mm Proximity Probe and Extension Cable.

330104-00-13-10-02-05 | Bently Nevada | extension cable

The following specifications are for a 3300 XL 8 mm Proximitor® Sensor, extension cable and 8 mm probe between +18 °C and +27 °C (+64 °F to +80 °F)

330104-00-05-10-02-00 | Bently Nevada | extension cable

Less than 2 mV change in output voltage per volt change in input voltage.

330130-080-01-00 | Bently Nevada | extension cable

Accepts one non-contacting 3300-series 5 mm, 3300 8 mm or 3300 XL 8 mm Proximity Probe and Extension Cable.

330730-080-01-00 | Bently Nevada | extension cable

2 mm (80 mils). Linear range begins at approximately 0.25 mm (10 mils) from target and is from 0.25 to 2.3 mm (10 to 90 mils) (approximately –1 to –17 Vdc)

330130-040-01-05/9200-040-01-05 | Bently Nevada | extension cable

-9Vdc [approximately 1.27 mm (50 mils)]

330104-00-08-10-02-05/10104-00-08-10-02-05 | Bently Nevada | extension cable

75 Ω triaxial, perfluoroalkoxy (PFA) insulated probe cable in the following total probe lengths: 0.5, 1, 1.5, 2, 5, or 9 metres.

330103-00-03-10-02-05 | Bently Nevada | extension cable

3300 XL Proximitor® Sensor Panel-mount Screws. Package includes four 6-32 UNC thread forming mounting screws.

330130-040-00-00 | Bently Nevada | extension cable

Bulk field wire. 1.0 mm2 (18 AWG), 3 conductor, twisted, shielded cable with drain wire. Specify length in feet.

330130-080-00-00 | Bently Nevada | extension cable

3300 XL 8 mm probes are designed to seal differential pressure between the probe tip and case.

330705-02-18-10-02-00 | Bently Nevada | extension cable

Less than 2 mV change in output voltage per volt change in input voltage.

330703-000-040-10-11-00 | Bently Nevada | extension cable

Less than 2 mV change in output voltage per volt change in input voltage.

330105-02-12-05-02-00 | Bently Nevada | extension cable

3300 XL 8 mm Probes and Extension Cables can also be ordered with connector protectors already installed.

330106-05-30-10-02-00 | Bently Nevada | extension cable

The 3300 XL Proximitor® Sensor incorporates numerous improvements over previous designs.

330105-02-12-10-02-00 | Bently Nevada | extension cable

The system provides an output voltage directly proportional to the distance between the probe tip and the observed conductive surface.

330106-05-30-05-02-05 | Bently Nevada | extension cable

Accepts one non-contacting 3300-series 5 mm, 3300 8 mm or 3300 XL 8 mm Proximity Probe and Extension Cable.

3300/65-14-01-00-00-01-00 | Bently Nevada | extension cable

Less than ±0.038 mm (±1.5 mil) with components at 0 °C to +45 °C (+32 °F to +113 °F)

3500/50 | Bently Nevada | Tachometer Module

The 3500/50 also has a peak hold feature that stores the highest speed,

3500/60 | Bently Nevada | Temperature Monitors

The user programs the modules to perform either RTD or TC temperature measurements using the 3500 Rack Configuration Software.

3500/15 | Bently Nevada | Power Supply

The 3500 Power Supplies are half-height modules and must be installed in the specially designed slots on the left side of the rack.

3500/32 GE/Bently Nevada | 4 Channel Relay Module

GE / Bently Nevada 3500/32 4 Channel Relay Module

3500/32M 149986-02 GE/Bently Nevada | 4 Channel Relay Module

GE / Bently Nevada 3500/32M 149986-02 4 Channel Relay Module

3500/34 GE/Bently Nevada | TMR Relay Module

GE / Bently Nevada 3500/34 TMR Relay Module

3500/42 125972-02 GE/Bently Nevada | PROXIMITOR/SEISMIC MONITOR MODULE

GE / Bently Nevada 3500/42 125972-02 PROXIMITOR/SEISMIC MONITOR MODULE

3500/90 | Bently Nevada | Communication Gateway

The Ethernet connection to the 3500/90 is an RJ45 connection for 10BASE-T star configuration Ethernet networks.

3500/42M GE/Bently Nevada | PROXIMITOR/SEISMIC MONITOR MODULE

GE / Bently Nevada 3500/42M PROXIMITOR/SEISMIC MONITOR MODULE

3500/45 140072-04 GE/Bently Nevada | Monitor Modules

GE / Bently Nevada 3500/45 140072-04 Monitor Modules

3300/15 | Bently Nevada | Dual Vibration Monitor

The 3300 System provides continuous, online monitoring suitable for machinery protection applications

3500/45 176449-04 GE/Bently Nevada | Monitor Modules

GE / Bently Nevada 3500/45 176449-04 Monitor Modules

3500/45 GE/Bently Nevada | Monitor Systems

GE / Bently Nevada 3500/45 Monitor System

3500/50 GE/Bently Nevada | Tachometer Module

GE / Bently Nevada 3500/50 Tachometer Module

3500/42 | Bently Nevada | Proximitor/Seismic Monitor

Indicates when the 3500/42 is operating properly.

3500/50M GE/Bently Nevada | Tachometer Module

GE / Bently Nevada 3500/50M Tachometer Module

3300/03-01-00 | Bently Nevada | System Monitor PLC Module

3300/03-01-00 To upgrade to an SDI/DDI compatible monitor

GE BENTLY NEVADA 3300/50-02-01-00-00 TACHOMETER MONITOR

The 3300 System provides continuous, online monitoring suitable for machinery protection applications

GE / Bently Nevada 3300/50-01-01-00-00

The 3300 System is intended for continuous, permanent monitoring of rotating and reciprocating machinery in a variety of industries

3300/16-15-01-03-00-00-00 | Bently Nevada | extension cable

The 3300 XL 8 mm system represents our most advanced performance in an eddy current proximity transducer system.

3300/20 | Bently Nevada | Dual Thrust Position Monitor

Many 3300 monitors feature latching OK option. The OK relay is reset with the RESET switch on the System Monitor

All products