toi test-sfyh.com

Ball Impact Tester GT-M28

Ball Impact Tester is used to test the impact resistance of all rigid toys that cover the face, meets standards: ASTM F 963, ISO 8124-1, GB6675-2.

Three Pronged Clamp GT-M37

Three Pronged Clamp is the assistant tool used for toys tension test. It meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.

Two Pronged Clamp GT-M36

Pronged Clamp is the assistant tool used for toys tension test. It meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.

Long - Mouth Clamp GT-M43

Long Mouth Clamp is the assistant tool used for toys tension test and it can do the tests according to standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124, GB6675-2.

ASTM Flexure Tester GT-M44A

Flexure Tester is used to do bending test, meets standards: ASTM F963, 16 CFR 1500, GB6675-2.

EN Flexure Tester GT-M44B

EN Flexure Tester is used to do the bending tests which meets standards: EN71-1 section 8.13, ISO 8124-1 section 5.24.8, GB6675-2 section 5.24.8.

Noise Testing Stand GT-M60

EN 71 part 1 Noise Testing Stand is the test stand for noise meter, meets standards: EN-71-1, ISO 8124-1, GB6675-2, ASTM F 963, 16CFR 1500.

Pen-Cap Air Flow Tester GT-S06

Pen cap air flow tester mainly be used to test the safety of the caps for writing and marking instruments which are designed or clearly intended for use by children up to 14 years of age. However, Caps for writing and marking instruments which are not designed or intended for use by children, e.g. jewellery pens, expensive fountain pens, professional technical pens, are not be test by this method .

Bite Tester GT-M45

Bite Tester is used to test whether the toys has cracked after bite test, and if it has produced hazardous sharp points, hazardous sharp edges, and hazardous small parts after crack.

EN Impact Test Table GT-M29

Impact Test Apparatus is used for the impact testing in the situation that simulating the toy material or imitation protection device toys are misused. Determine after impacting whether small parts, hazardous sharp edges , hazardous sharp points or hazardous driving mechanisms have become accessible.

Tension Clamp GT-M55

Tension Clamp is the assistant tool used for toys tension test. Meeting the standards: EN-71-1, ASTM F963, 16CFR, ISO 8124-1, GB6675-2.

Laboratory Drying Oven GT-D10

Laboratory drying oven used to the color fastness to perspiration drying testing for a variety of textiles, also can be used to the heating at high temperatures and drying testing for other products.

Color Fastness to Dry Cleaning GT-C36

Dry Cleaning Cylinder used to determine color fastness to dry-cleaning and chlorinated pool water, besides, to prepare samples for flammability testing. Meshed with various types of combustion tester, Use tetrachlorethylene to wash the surface flame retardants.

IMADA Digital Force Gauge GT-IMADA

IMADA push pull scale can measure tension, compression force accurately, and durable, is an ideal product for industrial quality control, research and development field strength test. All kinds of models has the zero adjustment for tare weight, and the scale dial is easy to read. Many ranges are offered, calibrated in Pounds, Kilograms, or Newtons.

TTF Tensile Tester GT-M16

The TTF tensile tester is used for providing large and stable tensile during the tension test. in tensile. It is mostly used for the toys’ destructive tension test.

Motor Brake Performance Testing Ramp GT-M27-1

This Motor Brake Performance Tester is a longer 10 degree ramp, mainly used for the brake test of electric ride-on toys.

Brake Performance Tester GT-M27-2

For this Brake Performance Tester, the tilt angle of the ramp is adjustable. The angle adjustment range is 0 ~ 45degree. Can be used to assist test the locking device of collapsible toys, the stability of toys, the brake performance of ride-on toys, etc., need to used with specified weight.

Average Speed Tester GT-M30

This Average Speed Tester is mainly used to test the mobile speed of the electric ride-on toy, can evaluate the motor braking performance and the maximum design speed of a toy cars.

Motor Horizontal Brake Performance Tester GT-M31

This Brake Test Machine is mainly used to test the motor brake performance of electric ride-on toys .

Push Pull Test Stand GT-M33

The Push Pull Test Stand is an assistant tool for push-pull test of toys. Applied with Push Pull Gauge, is specialized in tension/Compression, Insertion/withdraw and fracture test in every trade and scientific research organization. With gear drive and manual operation, adjustable test stand can be moved up and down to set orientation. Simpleness, stability, expeditiousness and appreciating batch test.