Universal adjustable end clamp kit POW-AEC

Universal adjustable (30-35mm) end clamp kit.. 100% brand new and high quality.

General end clamp kit POW-FEC

General end clamp kit. 100% brand new and high quality.

Universal adjustable inner clamp kit POW-AIC

Universal adjustable (30-40mm) inner clamp kit. 100% brand new and high quality.

Universal adjustable inner clamp kit POW-EIC

Universal adjustable (30-40mm) inner clamp kit . include spring & earthing clip. 100% brand new and high quality.

Standard rail clamp with T-Bolt POW-RCB

Standard rail clamp with T-Bolt.

Standard rail clamp with the carriage bolt POW-RCC

Standard rail clamp with the carriage bolt.

Double Glass Thin Film Solar Panel Mounting End Clamp Kit POW-TEC

Double Glass Thin Film Solar Panel Mounting End Clamp Kit. This kind of frameless solar clamp is special design for double glass solar panel, thin film solar panel. Thin film solar clamps are anodized with average thick 10μm。

Double Glass Thin Film Solar Panel Mounting inner Clamp Kit POW-TIC

Double Glass Thin Film Solar Panel Mounting inner Clamp Kit. This kind of frameless solar clamp is special design for double glass solar panel, thin film solar panel. Thin film solar clamps are anodized with average thick 10μm。

R52 & R52L rail end cover cap POW-REC

R52 & R52L rail end cover cap,Solo Rail Plastic End Cap - Black

Grounding Lug Kit 02 POW-ELG-02

solar panel grounding lug is application for solar mounting system grounding.

Grounding Lug Kit 03 POW-ELG-03

Attaches and Pierces the Solar Mounting Rails ensuring a Good Earth Bond between Mounting System, Inverter and Earth Stake in the event of a Ground Fault.

Powerack aluminum slider nuts POW-NUT

The slider nut is an important fastener for aluminum profiles, which is convenient and firm.

POW nuts assembly with bolt and washer kit POW-NBW

POW nuts assembly with bolt and washer kit,Besides standard dimension of solar sliding nuts , we can customized for solar panel installers according to their own aluminum mounting structure .

T-Bolt kit POW-TBK

T-Bolt kit. Includes T-Bolt and Flange Nut

Standard rail earthing plate 01 POW-REL-A

Standard rail earthing plate 01. Application: Solar Panels Installation Grounded System

Standard rail earthing plate 02 POW-REL-B

Standard rail earthing plate 02. Application: Solar Panels Installation Grounded System

Solar Panels Cable Clip POW-CCP-01

Cable clip for PV panels for holding 3 cables Powerack Cable clips accommodate for a broad range of cable combinations and sizes

Solar Panels Cable Clip POW-CCP-02

Cable clip for PV panels for holding 2 cables Powerack Cable clips accommodate for a broad range of cable combinations and sizes

Solar Panels Cable Clip POW-CCP-03

Cable clip for PV panels for holding 3 cables Solar Cable Clip is used for to hold and manage solar cable. Powerack Solar Cable Clipprovides reliable management of fixing solar module cable to the solar panel aluminumframe.

Ballasted-A systems 10° front leg kit POW-BPF-10

The ballasted-A systems 10° front leg kit is a mounting system designed for use with solar panels. It is a roof mount system that uses adjustable legs to ensure the solar panel is at the optimal angle for maximum efficiency.

Ballasted-A systems 10° rear leg kit POW-BPR-10

The Ballasted-A systems 10° rear leg kit is designed to provide a secure and stable mounting system for solar panels.

Ballasted-A systems 15° front leg kit POW-BPF-15

The POW-BPF-15 Ballasted-A system 15° front leg kit is a solar mounting system designed for flat roofs. It is designed to be installed on flat roofs with a minimum pitch of 15°

Ballasted-A systems 15° rear leg kit POW-BPR-15

The Solar Mounting Ballasted-A System 15° Rear Leg Kit is designed to provide a safe and stable mounting solution for solar panels. The kit includes accessories such as rear legs, front legs, and clamps.

Ballasted-A 10° wind shield POW-BPW-10

A ballasted solar mounting system with a 10° wind shield is a type of mounting system designed to securely hold photovoltaic (PV) panels in place while protecting them from the elements.

Ballasted-A 15° wind shield POW-BPW-15

The Ballasted-A 15°Wind Shield POW-BPW-15 is a solar mounting system designed to provide maximum protection against wind loads and reduce the risk of damage to solar panels. The system is composed of two parts: a base plate and a wind shield.

EPDM foam tape POW-EFT-03

EPDM foam tape is a high-performance, self-adhesive tape designed for use in solar mounting systems.

Solar Mounting Rail splice Kit 04 POW-SFR-04

A ballasted joint is a rail kit used to join two sections of rail together.

Ballasted Tray POW-BST-02

A ballasted tray solar roof system is a photovoltaic (PV) mounting system that secures solar panels to the roof.

Ballasted-B systems 10° front leg kit POW-BUF-10

The POW-BUF-10 ballasted-B system 10°front leg kit is designed for use with solar mounting systems. The kit includes 10° front leg, ballast blocks, and steel bolts.

Ballasted-B systems 10° rear leg kit POW-BUR-10

The POW-BUR-10 ballasted-B system 10° rear leg kit is a solar mounting system designed for flat roofs. It is used to secure photovoltaic modules in place and can be adjusted to fit different roof angles.

Ballasted-B systems 15° front leg kit POW-BUF-15

The POW-BUF-15 is a solar mounting ballasted-B system 15° front leg kit designed for flat roofs. It is made of high quality aluminum and stainless steel components that are resistant to corrosion and weathering.

Ballasted-B systems 15° rear leg kit POW-BUR-15

The POW-BUR-15 ballasted-B system 15° rear leg kit is a solar mounting system designed for use on flat roofs. It is suitable for both residential and commercial applications.

Adjustable front leg POW-AFL

The adjustable front leg is used for metal roof and concrete roof.It is a structure of tilt mount systems.And it is made of high quality aluminum and stainless steel.This product will be pre-assembled.

Adjustable rear leg POW-ARL-1015

Adjustable rear leg is part of tilt solar racking system for metal roof and concrete roof. The structure can be a fixed angle or adjustable angle based on the customer's needs..

Adjustable rear leg POW-ARL-1530

The adjustable rear leg is a structural component of tilt solar mount system for metal roof.The component can be a fixed angle or adjustable angle for the customer's needs. It made of high quality aluminum.

Adjustable rear leg POW-ARL-3060

The adjustable rear leg is structure of tilt solar racking system for metal roof.The structure can be a fixed angle or adjustable angle according to the customer's needs.

The fixing angle tripod POW-FTP-X

Tripod systems can be custom angled to meet customer needs.Adjustment angles of 5-10degrees,10-15 degrees, 15-30 degrees and 30-60 degrees.Tripods can be used on metal roof and concrete roof.And it will be installed before shipment to save you time.

The adjustable angle tripod POW-ATP-X

The tripod system can adjust angle.Adjustment angles of 10-15 degrees, 15-30 degrees and 30 to 60 degrees can be selected in order to maximize energy generation.Tripods can be used on metal roof and concrete roof.And it will be installed before shipment to save you time.

Mini rail 5° support front leg POW-MFS-5

5°rear leg support is a structural component of tilt solar mounting system for metal roof that provides stability and support.And it used for mini rail.

Mini rail 5° support rear leg POW-MRS-5

5°rear leg support is a structure component of tilt solar mounting system that provides stability and support.It is typically made of aluminum or steel.And it suitable for mini rail.

Company profile

All products