Special Offers

Products

Desk and Bed Universal Testing Machine GT-LD09

This tester is used for testing the mechanical properties of tables and desks. Can perform the horizontal static load and durability test, vertical static load and impact test.

Chair Backrest and Tilt Mechanism Durability Test Machine GT-LB13B

Chair Backrest and Tilt Mechanism Durability Test Machine The latest design of the machine has two test functions: First test is to evaluate the ability of the chairs to withstand fatigue stresses and wear caused by rearward force on the backrest of the chair. Second test is to evaluate the ability of the tilt mechanism to withstand the fatigue stresses and wear caused by repeated tilting.

Seat Stability Tester GT-LB20

Seat Stability Tester is used to test the stability of seat.

Stability test -Support apparatus GT-LB21

Stability test -Support apparatus is used to support the main stack of the loading discs in reclining chair tests.

Loading Disk GT-LB22

Loading Disk is used for reclining chair tests , with a mass of 10 kg each, diameter 350 mm and a thickness of 48 mm.

Support Fixture GT-LB23

Support Fixture used for testing Type III backward stability of the seat.

45 Degree Front Stability Load Point GT-LB24

This optional fixture may be used for locating the load point for front stability when it is difficult to determine the 60mm load point from the front center edge of the load-bearing surface of the seat.

CMD Placement Fixture GT-LB25

This is a fixture which hold the chair in position while applying the horizontal force and lowering the CMD into the chair.

Out Stop Tester GT-LB26

Out Stop Tester purpose of this test is to evaluate the ability of the seat slide out stops to withstand excessive impact forces that may result from user adjustment of the seat depth.

Basketball Horizontal Impact Testing Machine GT-LD02

Basketball Horizontal Impact Testing Machine is used for testing the horizental impact stability of furnitures.

Caster Durability Testing Machine GT-LD03

Caster Durability Testing Machine applies to pedestal base chairs with casters or chairs with legs and casters, to evaluate the ability of the casters , chair frame or chair base to withstand fatigue stresses and wear caused by moving the chair back and forth.

BIFMA 127×60 mm loading pad GT-LB01-12

This load pad is designed specifically for BIFMA X5.1, which is a rigid rectangle object 127×60 mm in dimension ,with a 12 mm front edge radius. Mainly used to test the office chair arm static load and durability.

Foam Material Horizontal Combustion Testing Machine GT-LE01

Foam Material Horizontal Combustion Testing Machine suitable for laboratory evaluation under the condition of less than 250 kg/M3of foam under small sample in the small flame combustion performance.

Sponge Resilience Tester GT-LE02

Sponge Resilience Tester make a steel ball free fall on flexible foamed plastics or other flexible materials.

Carpet Cushion Dynamic Fatigue Tester GT-LE04

Carpet Cushion Dynamic Fatigue Tester procedure describes tests that evaluate the specimen by repeatedly deflecting the carpet cushion by a 152 mm diameter and 152 mm wide rubber covered roller exerting a force of 266±5N on the test specimens.

Bed And Mattress Comprehensive Performance Tester GT-LA09

Bed And Mattress Comprehensive Performance Tester is the newest design bed and mattress comprehensive performance tester according to EN 1725 standard.

Furniture Universal Testing Machine GT-LA10

Furniture Universal Testing Machine is used for testing the mechanical properties of tables, desks, beds and chairs. Can perform the horizontal static load ,vertical static load, impact test and durability test.

Conical probes GT-LA11

Conical probes Apply the specified force value, measuring hole, bed rails, side rails, the distance between the bottom and side mesh clearance, clearance, and then removed for measuring internal force value, size after pressing.

Bunk Bed Test Mass GT-LA12

Bunk Bed Test Mass is used to assist bed test.

Foothold Impactor GT-LA13

Foothold Impactor is used to determine the footholds impact resistance of bunk bed and high bed.

Showing 1 to 2 of 2 (1 Pages)

click here to leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.