Gester Instruments Co.,Ltd.-sfyh.com

Whole Shoe Flexing Freezing Chamber GT-KC27

Whole shoe flexing freezing chamber,Freezing Chamber for shoe flex test,SATRA YM92 This machine is specially used for low temperature flexing test of whole shoes, such as sports shoes, cause shoes, safety shoes etc.

Low Temperature ROSS Flexing Tester GT-KB05B

The Low Temperature ROSS Flexing Tester is used to determine rectangular bending test of rubber products, shoe soles, PU, PVC, TPR foam and other materials. And inspect its degree of damage, cracking and reduced decline by continuously stretch and bending.

DeMattia Upper Flexing Tester GT-KB08B

DeMattia & Upper Flexing Tester is used to determine bending resistance of rubber, leather, synthetic leather, shoe sole and other materials. And inspect its flex cracking resistance, resistance to cracking and crack growth degree by repeatedly flexing in certain times and stroke.

Whole Shoes Flexing Tester (Test 2 Samples) GT-KA01-2B

Whole Shoes Flexing Tester GT-KA01-2B is used to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicating the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.

New Design Maeser Flexing Testing Machine GT-KC05-2

Maeser Flexing Tester is used to determine the resistance of leather, artical leather, fabric and so on material to water penetration on flexing.

Steel Shanks Bending Resistance Tester GT-KB55

Steel Shanks Bending Resistance Tester To determine bending resistance of shoes steel shank. Insert the steel shank into the fulcrum, the center column and the center of roller, and make the upper surface of the middle part of the shank close to the center column (φ10 mm).

Whole Sole ROSS Flexing Tester GT-KB05D

Whole Sole ROSS Flexing Tester GT-KB05D To determine right angle flexing risistance for whole sole of rubber, PU, PVC, TPR foam and other materials.

Heel Fatigue Tester GT-KB15

Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip.

Upholstery Fabrics Sewn Seam Dynamic Fatigue Tester GT-KB40

Seam Fatigue Tester is the measurement of failures in the three most commonly used upholstery seams - warp sewn to warp (wale to wale), filling sewn to filling (course to course), and warp sewn to filling (wale to course).

Steel Shanks Fatigue Resistance Tester GT-KB46

Steel Shanks Fatigue Resistance Tester is to determine fatigue resistance of shoes steel shank.

Elastic Tape Fatigue Testing Machine GT-KB44

Elastic Tape Fatigue Testing Machine is to determine its repeatedly extend performance under maximum extension for elastic fabric and elastic band and determine fatigue resistance of extensible material.

Hook and Loop Fatigue Tester GT-K19

Velcro Fatigue Tester is applicable for repeatedly open and close motion for touch and close fasteners and velcro tapes.

Zipper Fatigue Tester GT-C39A

This Zipper Fatigue Tester was use to do a variety of zipper reciprocating tests, by tests in a continuous back and forth action, the ultimate aim is to test the zipper created a distance between joints, loose or connector failure, fluff, wear, etc.

Magic Tape Closing Tester GT-K20

Velcro Closing Tester GT-K20; It is intended to press the two parts of the touch and close fastener together under controlled conditions, prior to determining the peel and shear strength.

James Slip Resistance Property Tester GT-KB36

James Slip Resistance Property Tester is used determine the dry static coefficient of friction of shoe sole and the heel materials.

Static Slip Resistance Tester GT-KB43

Static Slip Resistance Tester is to determine static slip resistance of outsole, heel and related outsole materials of footwear.

ISO 13287, SATRA TM144 Slip Resistance Tester GT-KB48

Slip Resistance Tester is to measure the sole friction coefficient, and then judge the slip resistance of shoes.

MARK II Slip Resistance Tester GT-KB49

MARK II Slip Resistance Tester is to determine maximum static friction of test specimen and floor by ratio of load horizontal force and vertical force.

Safety Shoes Impact Tester GT-KB17

Shoes Impact Tester is used for impact resistance of safety shoes. Impact steel head of safety shoes by 100J or 200J kinetic energy, and inspect it subsidence to check it quality.

Heel Impact Tester GT-KB14

Heel Impact Tester is used to determine the impact strength of heels of ladies’ shoes.

Ankle Protection Materials Shock Absorption Capacity Tester GT-KB16

The shock test machine is used for determination of the shock absorption capacity of ankle protection materials incorporated into the upper.

Impact Scuff Tester GT-KC46

Impact Scuff Tester,Floor marking machine,Scuff Tester for Footwear,Impact scuff for upper leather,Floor impact scuff test

Shoe Peeling Strength Tester GT-KC41B

Peeling Strength Tester is used to determine the strength of the bond between the sole and upper at the toe and heel area of the lasted margin of completed footwear. The method is mainly applicable to stuck-on or moulded-on constructions with an extended sole edge.

Company profile

All products