Safety Glove & Shoe Upper Cutting Tester GT-KC29

Cutting tester,Cutting test for shoe upper,Cutting test for safety glove This machine is used for safety glove protect area and shoe upper cutting testing, but it is not suitable for the glove made of hard materials.

Rebound Resilience Elasticity Tester GT-KB18

Resilience Elasticity Tester is used to measure the impact resistance of elastic material and flexible cellular materials.

Insole Backpart Stiffness Tester GT-KB45

Insole Backpart Stiffness Tester is used to measure the stiffness in the longitudinal direction of steel shanks used for the reinforcement.

Aging Oven GT-KD01

Accelarated Ageing Oven is used for testing the changes in characterstics of plastics, rubber, leather, fabrics before and after heating.

UV Light Discoloration Tester GT-KD02

Environmental Light Discoloration (UV) Tester is to test the resistance to discoloration of shoes materials. Such as white and light color upper materials, sole materials, leather, PU, fabric etc.

Heat Resistance Contact Tester GT-KB24

Heat resistance tester is used for determine the ability of shoe materials to withstand the heat due to shoe making operation.

Footwear Electric Shock Resistant Tester GT-KB42

Footwear Electric Shock Resistant Tester is designed to determine dielectric of various insulation shoes.

Shoes Heat Insulation Tester GT-KB47

Shoe Material Heat Insulation Tester is used to determine the heat insulation performance for the whole shoes.

Insole / Insock Absorption and Desorption Tester GT-KC07

Insole / Insole Absorption and Desorption Tester used to determine the water absorption and desorption of insole and insock for various shoes.

Leather Softness Tester GT-KC12

Soft Tester for Leather Material This Softness Tester is used for testing the softness of leather, animal skin by non-destructive method.

Leather Shrinkage Temperature Tester GT-KC23

Shrinkage Temperature Tester, Shrinkage Temperature Tester for Leather The instruments is mainly used to determine the shrinkage temperature of leather and fur.

Shoes Bending Stiffness Tester GT-KA16

Shoes Bending Stiffness Tester is used to measure bending resistance of whole shoes (France shoe Size 39, 42,and British shoe Size 6,Size 8). Clamp the foreshoes (confirming to 1/3 of palm shoes, located on shaft location), after motor launching, driving to pulley, to make shaft drive the turning board at 100mm/min to impose the strength of 30N to shoes in order to do test.

Leather Digital Lastometer GT-KC37A

Lastometer, Digital Lastometer, Leather Digital Lastometer: To determine the anti-cracking index for upper, leather facing and all kinds of thin leather.

Safety Shoes Cold Insulation Test Chamber GT-KB25

Safety Shoes Cold Insulation Test Chamber is used to determine the Cold insulation test for safety shoes under low-temperature.

Leather Crack Test Lastometer GT-KC37B

Leather lastometer, Leather lastometer of handle model, Grain testing equpment: To determine the anti-cracking index for upper, leather facing and all kinds of thin leather.

Anti-static Electrical Resistance Tester GT-KC38-1

Electrical resistance tester, Anti-static electrical resistance test,Electrical resistance tester for footwear: This instrument is used for testing the electrical resistance of the shoe or its materials so as to assess its anti-static characteristics.

Human Body General Resistance Tester GT-KC38-2

Pneumatic Sample Press GT-C48-2

Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder.

Thermostatic Oil Bath Tester GT-KC39

Thermostatic Oil Bath, Thermostatic Oil Bath Tester, Oli resistance tester: To determine the oil resistance for all kinds of materials and the length change rate under the oil temperature for PE, PVC etc.

Sole Leather Grain Crack Index Tester GT-KC40

Leather grain tester, Grain Crack Index Tester, Sole Leather Grain Crack Index Tester: To determine the propensity of the grain of a leather to crack during bending. The method is applicable to all sole leathers.

Cellular Rubber Hardness Tester GT-KC49

Cellular rubber hardness tester,Hardness tester for rubber,Foam Testing Equipment, Footwear Testing Machine

Melt Flow Tester GT-KC67

Melt Flow Tester, Melt Flow Tester for plastic material, Foowear testing machine

Density Balance & Densimeter GT-KD04

Densimeter, Density balance,Densimeter for rubber, Footwear materials desimeter Standards: ISO 2781, 1183, DIN 53479, ASTM D 297, D792, GB/T 533, T1033

Proportion Detector GT-KD05

Proportion Detector, Specific gravity test, Sole specific gravity test

Penetration-Resistant Inserts Flexing Tester GT-KB11

Penetration-Resistant Inserts Flexing Tester is used for determine the flex resistance of penetration-resistant inserts for safety shoes.

Thickness Gauge ( Leather ) GT-KD07

Thickness gague,Leather thickness tester,Thickness gague for leather materials Standards:BS-903-A38, ISO-4648, ASTMD1813, ISO 2589,SATRA TM48

Durometer Test Stand GT-KD09

Thickness gague,Leather thickness tester,Thickness gague for leather materials Standards:BS-903-A38, ISO-4648, ASTMD1813, ISO 2589,SATRA TM48

Shore A Durometer GT-KD09-LX-A

Durometer,Rubber hardness test,Shore A Durometer Tester Standards:GB/T531.1 , ISO7619-1, ASTMD2240- Type A

Shore AM Durometer GT-KD09-LX-AM

Shore AM Durometer,Rubber hardness tester,Rubber Durometer Standards:GB/T531.1 ,ISO7619-1, ASTMD 2240-Type M

Shore AO Durometer GT-KD09-LX-AO

Shore AO Durometer, Hardness Tester, Rubber Hardness Meter Standards:GB/T531.1 , ISO7619-1

Shore C Durometer GT-KD09-LX-C

Shore C Durometer, Hardness gague, Durometer for rubber Standards:HG/T2489

Shore D Durometer GT-KD09-LX-D

Shore D Durometer, Hardness meter for rubber, Hardness testing equipment Standards: GB/T531.1 , ISO7619-1, ASTMD 2240-Type D

Shore OO Durometer GT-KD09-LX-OO

Shore OO Durometer, Shore OO Hardness Tester for rubber, Shore OO Hardness Gauge Standards: ASTMD 2240-Type OO

Drill Machine GT-KD-DM68

Drill, Drill machine, Bench drill

Rubber Sole Non Marking Testing Machine GT-KA17

Non Marking Testing Machine is use to do non marking test for all the finished shoes products which require to do this test, so as to evaluate non marking performance for rubber sole of shoes.