Gester Instruments co.,ltd-sfyh.com

Sponge Resilience Tester GT-LE02

Sponge Resilience Tester make a steel ball free fall on flexible foamed plastics or other flexible materials.

Carpet Cushion Dynamic Fatigue Tester GT-LE04

Carpet Cushion Dynamic Fatigue Tester procedure describes tests that evaluate the specimen by repeatedly deflecting the carpet cushion by a 152 mm diameter and 152 mm wide rubber covered roller exerting a force of 266±5N on the test specimens.

Bed And Mattress Comprehensive Performance Tester GT-LA09

Bed And Mattress Comprehensive Performance Tester is the newest design bed and mattress comprehensive performance tester according to EN 1725 standard.

Furniture Universal Testing Machine GT-LA10

Furniture Universal Testing Machine is used for testing the mechanical properties of tables, desks, beds and chairs. Can perform the horizontal static load ,vertical static load, impact test and durability test.

Conical probes GT-LA11

Conical probes Apply the specified force value, measuring hole, bed rails, side rails, the distance between the bottom and side mesh clearance, clearance, and then removed for measuring internal force value, size after pressing.

Bunk Bed Test Mass GT-LA12

Bunk Bed Test Mass is used to assist bed test.

Foothold Impactor GT-LA13

Foothold Impactor is used to determine the footholds impact resistance of bunk bed and high bed.

Chair and Desk Point Static Loading and Durability Tester GT-LB15

Chair and Desk Point Static Loading and Durability Tester is used to do the point static loading and durability test of chair and desks.

BIFMA Loading point template GT-LB27

BIFMA Loading point template A template, which used for the measurement of seating products.

Front Edge Overturning Tester GT-LB29

Front Edge Overturning Tester is used to test the front edge overturning stability of seat.

Template for Rear Stability GT-LB30

Template for Rear Stability is used to determine the load point in rear stability test for chair.

Multiple Seating Chairs Strength and Durability Testing Machine GT-LB31

Multiple Seating Chairs Strength and Durability Testing Machine is used for testing the strength and durability of the armrest, seats and backrest by simulating the loading of the seats during daily use.

Digital Moisture Meter GT-LB-DT129

Digital Moisture Meter is used to test Moisture of wood, as many as 150 kinds of wood.

Bag Impact Stability Tester GT-LD04

Bag Impact Stability Tester is used to evalute the stability of the load bearing panels.

Upward Impact Force Disengagement Testing Machine GT-LD10

Upward Impact Force Disengagement Testing Machine is to evaluate the ability of a storage component to resist accidental disengagement that may occur as a result of impacts exerted from beneath the component.

Drawer Rebound Testing Machine GT-LD11

The purpose of this test is to evaluate the operational characteristics of a loaded extendible element to ensure that it will not bounce back out of the unit beyond the acceptance level while being closed.

Drawer Fixed Weight Impact and Fatigue Resistance Tester GT-LD12

Drawer Fixed Weight Impact and Fatigue Resistance Tester is used to test the durability of the drawer mounted on the furniture to withstand the impact of the weight.

Table & Desk Static Load Pad GT-LD15

Desk Static Load Pad is used to determine static loading property of top of table or desk.

25 Lbs Weights Plate GT-LD16

25Lbs Weights Plate is used to determine static loading property of top of table or desk.

Transaction Surface Torsion Load Test GT-LD17

Transaction Surface Torsion Load is to evaluate the ability of the transaction surface to withstand torsional static loads which they may be subjected to when in use.

ASTM F1566 Mattress Impact Drop Tester GT-LA01

Mattress impact & drop tester is widely used to determine and assess the impact resistance of built-in and box-type mattress, to evaluate sofa and mattress sustaining rapid drop on seat or jumping stress ability.

ISO 3385 Foam Constant-load Pounding Fatigue Tester GT-LE03

Foam Constant-load Pounding Fatigue Tester GT-LE03 Determine the thickness reduced value and hardness decreased value of porous elastic materials used in interior decoration.

Seat Surface Load Pad GT-LB01-13

This Seat Surface Load Pad is suitable for testing seat, office chair forward stability test.

Chair Seating and Back Testing Machine GT-LB04-3

The chair testing machine tests the strength and durability of the seats and backrests by simulating the routine use loading of the seat.

BIFMA Desks Casters Durability Testing Machine GT-LD03B

The BIFMA Desks Casters Durability Testing Machine GT-LD03B is applies to tables which have castors fitted to all legs/supports, used to evaluate the castors and table frame ability of withstanding fatigue stresses and wear caused by moving the table back and forth.

Door Durability Testing Machine GT-LD36

No brief introduction

Dyeing Fur Abrasion Tester GT-LC24

Dyeing Fur Abrasion Tester is used to test color fastness of dyeing fur, suitable for all kinds of dyeing fur under dry abrasion test and wet abrasion test.

Belt Dynamic Durability Tester GT-LC21

Belt Dynamic Durability Tester for testing the durability of specimens like belts, straps, bags and soft belt handles.

Drawer Durability Strength Testing Machine GT-LD01C

Drawer Durability Strength Testing Machine is designed to test the durability and strength of drawers, desks, cabinets and wardrobe.

Packaging Clamping Force Testing Machine GT-N55

Packaging Clamping Force Testing Machine is used for simulation when the clamp vehicle loading and unloading the package,the clamping force between two plywood impact on the package and goods, test and evaluate package’s clamp strength.

Edge Crush Test Machine (RCT/FCT/PAT/CMT) GT-N09

Edge Crush Test Machine is well-designed using modern mechanical design theory and human engineering design criteria and micro-process.

100KN Carton Box Compression Tester GT-N02D

100KN Carton Box Compression Tester uses high-precision force sensor to test the resistance value of pressure and display it directly.

Corrugated Box Compression Strength Tester GT-N02B

Corrugated Box Compression Strength Tester with multi-function and high precision is designed to test the compressive strength of standard size corrugated box, or packages and containers made of other material with a compressive strength smaller than 100kN.

MIT Type Folding Endurance Tester GT-N16

MIT Type Folding Endurance Tester has various functions, such as, parameter testing, parametric transformation, parameter regulation, parameter display, parameter memory and parameter print.

Packaging Incline Impact Testing Equipment GT-N49

Packaging Incline Impact Testing Equipment test the ability of product against impact damage in the real environment, such as handling, stacking of shelves, sliding motor, loading and unloading of locomotives, transportation of products, etc.

Company profile

All products