Email Us : info@sfyh.com

Company profile

Gester Instruments Co., Ltd. a manufacturer and supplier who specializes in children's products testing machine,toy testing equipment,furniture testing equipment and mattress testing equipment.

All products

Flammability Testing Nailed Fixture GT-MB18

Flammability Testing Nailed Fixture mainly used to test the inflaming retarding performance for solid and soft toys according to ASTM standard.

EN Impact Test Table GT-M29

EN Impact Test Table Used for the impact testing in the situation that simulating the toy material.

45 Degree Automatic Flammability Tester GT-C32

45 Degree Automatic Flammability Tester To determine the burning characteristics of textiles under controlled conditions.

Children bed comprehensive tester GT-MF01

Children bed comprehensive tester is mainly used for crib comprehensive performance test.

EN Drop Tester GT-M35A

The EN Drop Tester is to determine the toys fall on the floor through a certain height, fall in a certain number, then check whether the hazardous sharp points, hazardous sharp edges, hazardous small parts and hazardous driving mechanisms have become accessible.

ASTM Drop Tester GT-M35B

The ASTM Drop Tester is to determine the toys fall on the floor through a certain height, fall in a certain number, then check whether the hazardous sharp points, hazardous sharp edges, hazardous small parts and hazardousdriving mechanisms have become accessible.

Average Speed Tester GT-M30

This Average Speed Tester is mainly used to test the mobile speed of the electric ride-on toy, can evaluate the motor braking performance and the maximum design speed of a toy cars.

Kinetic Energy Tester GT-M18A

EN71 Part 1 Kinetic Energy Tester GT-M18A is used to detect the maximum kinetic energy generated by the fired bullets of projectile toys or the launched bows, thereby to determine whether the toy projectiles would harm the child.

Motor Horizontal Brake Performance Tester GT-M31

Motor Horizontal Brake Performance Tester is mainly used to test the motor brake performance of electric ride-on toys.

Surface Flash Tester GT-M20

Surface Flash Tester is used to test the flammability of pile fabrics and simulated fur fabrics ( except floor coverings).

Safety Tester Diameter Rod GT-MF03

Safety Tester Diameter Rodis used to determine whether the openings or pores on the children bed will cause children finger fall into or not. This kit contains a 5.33mm diameter rod and a 9.53mm diameter rod.

ASTM F1821 Wedge Block GT-MF04

ASTM F1821 Wedge Block is used to determine whether the openings or pores on the children bed will cause children body fall into or not.

2m/s Tester & Dynamic Strength Tester GT-M19

Dynamic Strength Tester is mainly used to test the dynamic strength of wheeled ride-on toys.

Bite Tester GT-M45

Bite Tester is used to test whether the toys has cracked after bite test.

Rattle Test Template GT-M46

Rattle Test Template is used to test whether toys or the parts of toys may cause choking or swallowing.

Noise Testing Stand GT-M60

EN 71 part 1 Noise Testing Stand is the test stand for noise meter.

Pen Cap Air Flow Tester GT-S06

Pen cap air flow tester mainly be used to test the safety of the caps for writing and marking instruments. Standards: ISO 11540, BS 7272-1, GB/T 24110.

Small Part Cylinder GT-MB03

Small Part Cylinder used to determine the potential hazards of suffocate, suction, swallow, etc, which results from the toys or other articles with small parts used for the children below 3 years old.

Ball Impact Tester GT-M28

Ball Impact Tester is used to test the impact resistance of all rigid toys.

ISO 8124-1 ASTM F963 EN 71-1 Sharp Edge Tester GT-MB01

Toy Safety Testing Sharp Edge Tester Determine that metal or glass edges on toys and other articles intended for use by children under 8 years of age, and such edges exposed in normal use or as a result of reasonably forseeable damage or abuse of such toys and articles, present a potential risk of injury by laceration or avulsion

Programmable Temperature & Humidity Test Chamber GT-C52

Programmable Temperature & Humidity Test Chamber is used to keep samples in a condition of fixed temperature and humidity before a test.

IEC60695 Glow Wire Tester Apparatus GT-MC35H

IEC60695 Glow Wire Tester Apparatus GT-MC35H is the latest release of the flaming test equipment (glow wire test), with imports of touch-screen controller and instrument.

Transportation Vibration Tester GT-M11

Transportation Vibration Tester is used to simulate the goods in transit, encounter different road conditions such as bumpy, uphill, downhill, cornering, etc.

TTF Tensile Tester GT-M16

TTF Tensile Testing Machine is used for providing large and stable tensile during the tension test. in tensile. It is mostly used for the toys’ destructive tension test.

Toy Chest Lid Durability Tester GT-M02

Toys Chest Lid Tester applies to test the durability of toys box cover. It uses fixtures to drive the toy box cover move, after simulating a certain number of opening and closing movements, check whether the toy box lid hinge part’s functions are in good condition.

Mouth-Actuated Tester GT-M03

Mouth-actuated tester is suitable for the test of the safety of the Mouth-Actuated Toys, such as whistles with a ball, the sounders with a reed and other toys.

Snap Button Pull Strength Tester GT-C09

Snap Button Tester is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can fixed on garments suitable.

Proof Tracking Testing Machine GT-MC36

Proof Tracking Testing Machine is suitable for the research, production and quality control for lighting, low voltage electrical appliances, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, information technology equipment, and also suitable for insulation, plastic, electrical connections, accessories industry.

Horizontal and Vertical Flame Chamber GT-MC35F

Horizontal and Vertical Flame Chamber is the latest release of the flame test equipment, flame chamber with imports of touch-screen controller and instrument.

EN71-2 ISO 8124 Toys Flammability Tester GT-M17

Toys Flammability Tester GT-M17 is used to test children apparel or toy and its decorations flammability performance, to evaluate the burning speed and time of the following kinds of toys.

IEC60695 Needle Flame Tester GT-MC35G

Needle Flame Tester is the latest release of the flaming test equipment, with imports of touch-screen controller and instrument.

Toys Testing Sharp Point Tester GT-MB04

Sharp Point Tester is used to determinate that points on toys and other articles intended for use by children under 8 years of age.

Brake Performance Tester GT-M27-2

For this Brake Performance Tester, the tilt angle of the ramp is adjustable. The angle adjustment range is 0 ~ 45 degree. Can be used to assist test the locking device of collapsible toys, the stability of toys, the brake performance of ride-on toys, etc., need to used with specified weight.

Partially Bounded Openings Test Probe GT-MF05

ASTM F1821 Partially Bounded Openings Test Probe used to determine whether the openings on the children bed will cause children body fall into or not.

Accessibility Probe + Standard Test Finger Probe GT-MB06

Accessibility Probe is used to determine whether the hazardous parts of toys can be touched. If it is accessible,then conduct the related test according to standards so as to reduce the damage hazards for children.

Noise Meter GT-AWA6228Plus

Noise meter is used to measure the sound pressure level comes form sound toys in a predetermined distance. It meets standards: EN-71-1, ISO 8124-1, GB6675-2, ASTM F963, 16CFR 1500.

Clamp for Wheel Tension GT-M54

Clamp for Wheel Tension is the assistant tool used for toys tension test. Mainly used for toy car wheels tension test. It meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.

Wide-Mouth Clamp GT-M53

Wide-Mouth Clamp is the assistant tool used for toys tension test.It is a wide mouth clamp ,meets standards: EN-71-1, ASTM F963, 16CFR 1500, ISO 8124-1, GB6675-2.

Hook Test Fixture for Cords and Loops GT-MB24

Hook Test Fixture is an auxiliary tool to measure perimeter for Loops and Cords, so as to determine whether length of ropes complies with safety requirements.

Seam Clamp GT-M50

Seam Clamp is the assistant tool used for toys tension test and is a Seam Clamp Metal Clamps, 16CFR 1500 Metal Clamps, ISO 8124-1 GB6675-2 Metal Clamps.

Showing 1 to 5 of 5 (1 Pages)

click here to leave a message
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.